.gitignore

@@ -4,4 +4,3 @@ secrets/*
 cluster/*/secrets/*
 !cluster/*/secrets/*.sample
 
-adrn-notes/

cluster/prod/app/backup/README.md

@@ -1,32 +0,0 @@
-## Pour remonter locement un backup de PSQL fait par Nomad (backup-weekly.hcl)
-
-```bash
-export AWS_BUCKET=backups-pgbasebackup
-export AWS_ENDPOINT=s3.deuxfleurs.shirokumo.net
-export AWS_ACCESS_KEY_ID=$(consul kv get "secrets/postgres/backup/aws_access_key_id")
-export AWS_SECRET_ACCESS_KEY=$(consul kv get secrets/postgres/backup/aws_secret_access_key)
-export CRYPT_PUBLIC_KEY=$(consul kv get secrets/postgres/backup/crypt_public_key)
-```
-
-Et voilà le travail : 
-
-```bash
-$ aws s3 --endpoint https://$AWS_ENDPOINT ls
-2022-04-14 17:00:50 backups-pgbasebackup
-
-$ aws s3 --endpoint https://$AWS_ENDPOINT ls s3://backups-pgbasebackup
-                           PRE 2024-07-28 00:00:36.140539/
-                           PRE 2024-08-04 00:00:21.291551/
-                           PRE 2024-08-11 00:00:26.589762/
-                           PRE 2024-08-18 00:00:40.873939/
-                           PRE 2024-08-25 01:03:54.672763/
-                           PRE 2024-09-01 00:00:20.019605/
-                           PRE 2024-09-08 00:00:16.969740/
-                           PRE 2024-09-15 00:00:37.951459/
-                           PRE 2024-09-22 00:00:21.030452/
-
-$ aws s3 --endpoint https://$AWS_ENDPOINT ls "s3://backups-pgbasebackup/2024-09-22 00:00:21.030452/"
-2024-09-22 03:23:28     623490 backup_manifest
-2024-09-22 03:25:32 6037121487 base.tar.gz
-2024-09-22 03:25:33   19948939 pg_wal.tar.gz
-```

cluster/prod/app/backup/build/backup-psql/backup-psql.py

@@ -44,8 +44,6 @@ if not client.bucket_exists(bucket):
   abort(f"Bucket {bucket} does not exist or its access is forbidden, aborting")
 
 # Perform the backup locally
-# Via command-line:
-# pg_basebackup --host=localhost --username=$PSQL_USER --pgdata=. --format=tar  --wal-method=stream --gzip --compress=6 --progress --max-rate=5M
 try:
   ret = subprocess.run(["pg_basebackup",
     f"--host={psql_host}",

cluster/prod/app/backup/deploy/backup-daily.hcl

@@ -14,7 +14,7 @@ job "backup_daily" {
     constraint {
       attribute = "${attr.unique.hostname}"
       operator = "="
-      value = "ananas"
+      value = "celeri"
     }
 
     task "main" {
@@ -152,7 +152,7 @@ EOH
     constraint {
       attribute = "${attr.unique.hostname}"
       operator = "="
-      value = "abricot"
+      value = "courgette"
     }
 
     task "main" {

cluster/prod/app/bagage/deploy/bagage.hcl

@@ -1,5 +1,5 @@
 job "bagage" {
-  datacenters = ["corrin", "neptune", "scorpio"]
+  datacenters = ["scorpio", "neptune"]
   type = "service"
   priority = 90
 

cluster/prod/app/cms/deploy/cms.hcl

@@ -1,5 +1,5 @@
 job "cms" {
-  datacenters = ["corrin", "neptune", "scorpio"]
+  datacenters = ["neptune", "scorpio"]
   type = "service"
 
   priority = 100

cluster/prod/app/core/deploy/bottin.hcl

@@ -1,5 +1,5 @@
 job "core-bottin" {
-  datacenters = ["corrin", "neptune", "scorpio", "bespin"]
+  datacenters = ["neptune", "scorpio"]
   type = "system"
   priority = 90
 

cluster/prod/app/core/deploy/d53.hcl

@@ -1,5 +1,5 @@
 job "core-d53" {
-  datacenters = ["neptune", "scorpio", "bespin", "corrin"]
+  datacenters = ["neptune", "scorpio", "bespin"]
   type = "service"
   priority = 90
 

cluster/prod/app/core/deploy/diplonat.hcl

@@ -1,5 +1,5 @@
 job "core-diplonat" {
-  datacenters = ["neptune", "scorpio", "bespin", "corrin"]
+  datacenters = ["neptune", "scorpio", "bespin"]
   type = "system"
   priority = 90
 

cluster/prod/app/core/deploy/tricot.hcl

@@ -3,7 +3,7 @@ job "core-tricot" {
   # on pourra mettre bespin quand on aura migré gitea de la vm vers le cluster
   # en attendant, les deux  ne sont pas capables de partager les certificats SSL
   # donc on laisse la VM gitea gérer les certifs et prendre tout le trafic http(s)
-  datacenters = ["corrin", "neptune", "scorpio"]
+  datacenters = ["neptune", "scorpio"]
   type = "system"
   priority = 90
 
@@ -28,7 +28,7 @@ job "core-tricot" {
       driver = "docker"
 
       config {
-        image = "armael/tricot:n6dk1b5xrdww12zf12jbcmihqs6g1brz"
+        image = "superboum/amd64_tricot:54"
         network_mode = "host"
         readonly_rootfs = true
         ports = [ "http_port", "https_port" ]

cluster/prod/app/coturn/deploy/coturn.hcl

@@ -1,5 +1,5 @@
 job "coturn" {
-  datacenters = ["corrin", "neptune", "scorpio"]
+  datacenters = ["neptune", "scorpio"]
   type = "service"
 
   priority = 100

cluster/prod/app/cryptpad/build/default.nix

@@ -3,7 +3,6 @@
 
 , buildNpmPackage
 , fetchFromGitHub
-, fetchzip
 
 , nodejs
 
@@ -31,8 +30,8 @@
       hash = "sha256-BZdExj2q/bqUD3k9uluOot2dlrWKA+vpad49EdgXKww=";
     };
     v7 = {
-      rev = "e1267803ea749cd93e9d5f81438011ea620d04af";
+      rev = "ba82142ff242ce385804bcb4287126de52d329f3";
-      hash = "sha256-iIds0GnCHAyeIEdSD4aCCgDtnnwARh3NE470CywseS0=";
+      hash = "sha256-3WX3dTWJoeApon1AH3XplBIvEosVNzchkjgi2C808B4=";
     };
   };
   mkOnlyOffice = {
@@ -41,14 +40,6 @@
     pname = "${pname}-onlyoffice";
     inherit version;
 
-    x2t = let
-      version = "v7.3+1";
-    in fetchzip {
-      url = "https://github.com/cryptpad/onlyoffice-x2t-wasm/releases/download/${version}/x2t.zip";
-      hash = "sha256-d5raecsTOflo0UpjSEZW5lker4+wdkTb6IyHNq5iBg8=";
-      stripRoot = false;
-    };
-
     srcs = lib.mapAttrsToList (version: { rev, hash ? lib.fakeHash }: fetchFromGitHub {
       name = "${final.pname}-${version}-source";
       owner = "cryptpad";
@@ -66,21 +57,20 @@
         (version: "cp -Tr ${final.pname}-${version}-source $out/${version}")
         (builtins.attrNames onlyOfficeVersions)
       )}
-      cp -Tr $x2t $out/x2t
     '';
   });
 in buildNpmPackage rec {
   pname = "cryptpad";
-  version = "2024.9.0";
+  version = "2024.3.1";
 
   src = fetchFromGitHub {
     owner = "cryptpad";
     repo = "cryptpad";
     rev = version;
-    hash = "sha256-OUtWaDVLRUbKS0apwY0aNq4MalGFv+fH9VA7LvWWYRs=";
+    hash = "sha256-kXghuktaKicFOz98Siy/OjJ9rlgy6C2BTKkD2OFLE+k=";
   };
 
-  npmDepsHash = "sha256-pK0b7q1kJja9l8ANwudbfo3jpldwuO56kuulS8X9A5s=";
+  npmDepsHash = "sha256-fjImdtv0bwgdDvl/BXV0DesreOAW2u8HsNqJ13hrJMw=";
 
   inherit nodejs;
 
@@ -117,10 +107,6 @@ in buildNpmPackage rec {
     runHook postInstall
   '';
 
-  passthru = {
-    inherit onlyOffice;
-  };
-
   meta = {
     description = "Collaborative office suite, end-to-end encrypted and open-source.";
     homepage = "https://cryptpad.org";

cluster/prod/app/cryptpad/build/deuxfleurs.nix

@@ -5,10 +5,8 @@
   pkgs = import sources.nixpkgs {};
 in rec {
   cryptpad = pkgs.callPackage ./default.nix {};
-  docker = import ./docker.nix {
+  docker = pkgs.callPackage ./docker.nix {
-    inherit pkgs;
     inherit name tag;
     inherit cryptpad;
-    withOnlyOffice = true;
   };
 }

cluster/prod/app/cryptpad/build/npins/sources.json

@@ -2,9 +2,9 @@
   "pins": {
     "nixpkgs": {
       "type": "Channel",
-      "name": "nixos-24.05",
+      "name": "nixos-23.11",
-      "url": "https://releases.nixos.org/nixos/24.05/nixos-24.05.5385.1719f27dd95f/nixexprs.tar.xz",
+      "url": "https://releases.nixos.org/nixos/23.11/nixos-23.11.7237.46397778ef1f/nixexprs.tar.xz",
-      "hash": "0f7i315g1z8kjh10hvj2zv7y2vfqxmwvd96hwlcrr8aig6qq5gzm"
+      "hash": "00cy8q07diavxb91g7pxl0gqc68s3hzimsggjc9rqyf99h1q9d3r"
     }
   },
   "version": 3

cluster/prod/app/cryptpad/build_docker/Dockerfile

@@ -1,59 +0,0 @@
-# SPDX-FileCopyrightText: 2023 XWiki CryptPad Team <contact@cryptpad.org> and contributors
-#
-# SPDX-License-Identifier: AGPL-3.0-or-later
-#
-# Tweaks by Deuxfleurs
-
-# Multistage build to reduce image size and increase security
-FROM node:lts-slim AS build
-ENV DEBIAN_FRONTEND=noninteractive
-
-RUN apt-get update && apt-get install --no-install-recommends -y \
-    ca-certificates tar wget
-
-# Download the release tarball
-RUN wget https://github.com/cryptpad/cryptpad/archive/refs/tags/2024.9.0.tar.gz -O cryptpad.tar.gz
-
-# Create folder for CryptPad
-RUN mkdir /cryptpad
-
-# Extract the release into /cryptpad
-RUN tar xvzf cryptpad.tar.gz -C /cryptpad --strip-components 1
-
-# Go to /cryptpad
-WORKDIR /cryptpad
-
-# Install dependencies
-RUN npm install --production && npm run install:components
-
-# Create the actual CryptPad image
-FROM node:lts-slim
-ENV DEBIAN_FRONTEND=noninteractive
-
-# Install curl for healthcheck
-# Install git, rdfind and unzip for install-onlyoffice.sh
-RUN apt-get update && apt-get install --no-install-recommends -y \
-    curl ca-certificates git rdfind unzip && \
-    apt-get clean && \
-    rm -rf /var/lib/apt/lists/*
-
-# Copy cryptpad with installed modules
-COPY --from=build /cryptpad /cryptpad
-
-# Set workdir to cryptpad
-WORKDIR /cryptpad
-
-# Install onlyoffice
-RUN ./install-onlyoffice.sh --accept-license --trust-repository
-
-# Build static pages (?) unsure we need this
-RUN npm run build
-
-# Healthcheck
-HEALTHCHECK --interval=1m CMD curl -f http://localhost:3000/ || exit 1
-
-# Ports
-EXPOSE 3000 3003
-
-# Run cryptpad on startup
-CMD ["npm", "start"]

cluster/prod/app/cryptpad/config/config-debug.js

@@ -1,296 +0,0 @@
-/* globals module */
-
-/*  DISCLAIMER:
-
-    There are two recommended methods of running a CryptPad instance:
-
-    1. Using a standalone nodejs server without HTTPS (suitable for local development)
-    2. Using NGINX to serve static assets and to handle HTTPS for API server's websocket traffic
-
-    We do not officially recommend or support Apache, Docker, Kubernetes, Traefik, or any other configuration.
-    Support requests for such setups should be directed to their authors.
-
-    If you're having difficulty difficulty configuring your instance
-    we suggest that you join the project's IRC/Matrix channel.
-
-    If you don't have any difficulty configuring your instance and you'd like to
-    support us for the work that went into making it pain-free we are quite happy
-    to accept donations via our opencollective page: https://opencollective.com/cryptpad
-
-*/
-module.exports = {
-/*  CryptPad is designed to serve its content over two domains.
- *  Account passwords and cryptographic content is handled on the 'main' domain,
- *  while the user interface is loaded on a 'sandbox' domain
- *  which can only access information which the main domain willingly shares.
- *
- *  In the event of an XSS vulnerability in the UI (that's bad)
- *  this system prevents attackers from gaining access to your account (that's good).
- *
- *  Most problems with new instances are related to this system blocking access
- *  because of incorrectly configured sandboxes. If you only see a white screen
- *  when you try to load CryptPad, this is probably the cause.
- *
- *  PLEASE READ THE FOLLOWING COMMENTS CAREFULLY.
- *
- */
-
-/*  httpUnsafeOrigin is the URL that clients will enter to load your instance.
- *  Any other URL that somehow points to your instance is supposed to be blocked.
- *  The default provided below assumes you are loading CryptPad from a server
- *  which is running on the same machine, using port 3000.
- *
- *  In a production instance this should be available ONLY over HTTPS
- *  using the default port for HTTPS (443) ie. https://cryptpad.fr
- *  In such a case this should be also handled by NGINX, as documented in
- *  cryptpad/docs/example.nginx.conf (see the $main_domain variable)
- *
- */
-    httpUnsafeOrigin: 'https://pad-debug.deuxfleurs.fr',
-
-/*  httpSafeOrigin is the URL that is used for the 'sandbox' described above.
- *  If you're testing or developing with CryptPad on your local machine then
- *  it is appropriate to leave this blank. The default behaviour is to serve
- *  the main domain over port 3000 and to serve the sandbox content over port 3001.
- *
- *  This is not appropriate in a production environment where invasive networks
- *  may filter traffic going over abnormal ports.
- *  To correctly configure your production instance you must provide a URL
- *  with a different domain (a subdomain is sufficient).
- *  It will be used to load the UI in our 'sandbox' system.
- *
- *  This value corresponds to the $sandbox_domain variable
- *  in the example nginx file.
- *
- *  Note that in order for the sandboxing system to be effective
- *  httpSafeOrigin must be different from httpUnsafeOrigin.
- *
- *  CUSTOMIZE AND UNCOMMENT THIS FOR PRODUCTION INSTALLATIONS.
- */
-    httpSafeOrigin: "https://pad-sandbox-debug.deuxfleurs.fr",
-
-/*  httpAddress specifies the address on which the nodejs server
- *  should be accessible. By default it will listen on 127.0.0.1
- *  (IPv4 localhost on most systems). If you want it to listen on
- *  all addresses, including IPv6, set this to '::'.
- *
- */
-    httpAddress: '::',
-
-/*  httpPort specifies on which port the nodejs server should listen.
- *  By default it will serve content over port 3000, which is suitable
- *  for both local development and for use with the provided nginx example,
- *  which will proxy websocket traffic to your node server.
- *
- */
-    httpPort: 3000,
-
-/*  httpSafePort allows you to specify an alternative port from which
- *  the node process should serve sandboxed assets. The default value is
- *  that of your httpPort + 1. You probably don't need to change this.
- *
- */
-    // httpSafePort: 3001,
-
-/*  CryptPad will launch a child process for every core available
- *  in order to perform CPU-intensive tasks in parallel.
- *  Some host environments may have a very large number of cores available
- *  or you may want to limit how much computing power CryptPad can take.
- *  If so, set 'maxWorkers' to a positive integer.
- */
-    // maxWorkers: 4,
-
-    /* =====================
-     *         Admin
-     * ===================== */
-
-    /*
-     *  CryptPad contains an administration panel. Its access is restricted to specific
-     *  users using the following list.
-     *  To give access to the admin panel to a user account, just add their public signing
-     *  key, which can be found on the settings page for registered users.
-     *  Entries should be strings separated by a comma.
-     */
-    adminKeys: [
-      "[quentin@pad.deuxfleurs.fr/EWtzm-CiqJnM9RZL9mj-YyTgAtX-Zh76sru1K5bFpN8=]",
-      "[adrn@pad.deuxfleurs.fr/PxDpkPwd-jDJWkfWdAzFX7wtnLpnPlBeYZ4MmoEYS6E=]",
-      "[lx@pad.deuxfleurs.fr/FwQzcXywx1FIb83z6COB7c3sHnz8rNSDX1xhjPuH3Fg=]",
-      "[trinity-1686a@pad-debug.deuxfleurs.fr/Pu6Ef03jEsAGBbZI6IOdKd6+5pORD5N51QIYt4-Ys1c=]",
-      "[Jill@pad.deuxfleurs.fr/tLW7W8EVNB2KYETXEaOYR+HmNiBQtZj7u+SOxS3hGmg=]",
-      "[vincent@pad.deuxfleurs.fr/07FQiE8w1iztRWwzbRJzEy3xIqnNR31mUFjLNiGXjwU=]",
-      "[boris@pad.deuxfleurs.fr/kHo5LIhSxDFk39GuhGRp+XKlMjNe+lWfFWM75cINoTQ=]",
-      "[maximilien@pad.deuxfleurs.fr/UoXHLejYRUjvX6t55hAQKpjMdU-3ecg4eDhAeckZmyE=]",
-      "[armael@pad-debug.deuxfleurs.fr/CIKMvNdFxGavwTmni0TnR3x9GM0ypgx3DMcFyzppplU=]",
-      "[bjonglez@pad-debug.deuxfleurs.fr/+RRzwcLPj5ZCWELUXMjmt3u+-lvYnyhpDt4cqAn9nh8=]"
-    ],
-
-    /* =====================
-     *        STORAGE
-     * ===================== */
-
-    /*  Pads that are not 'pinned' by any registered user can be set to expire
-     *  after a configurable number of days of inactivity (default 90 days).
-     *  The value can be changed or set to false to remove expiration.
-     *  Expired pads can then be removed using a cron job calling the
-     *  `evict-inactive.js` script with node
-     *
-     *  defaults to 90 days if nothing is provided
-     */
-    //inactiveTime: 90, // days
-
-    /*  CryptPad archives some data instead of deleting it outright.
-     *  This archived data still takes up space and so you'll probably still want to
-     *  remove these files after a brief period.
-     *
-     *  cryptpad/scripts/evict-inactive.js is intended to be run daily
-     *  from a crontab or similar scheduling service.
-     *
-     *  The intent with this feature is to provide a safety net in case of accidental
-     *  deletion. Set this value to the number of days you'd like to retain
-     *  archived data before it's removed permanently.
-     *
-     *  defaults to 15 days if nothing is provided
-     */
-    //archiveRetentionTime: 15,
-
-    /*  It's possible to configure your instance to remove data
-     *  stored on behalf of inactive accounts. Set 'accountRetentionTime'
-     *  to the number of days an account can remain idle before its
-     *  documents and other account data is removed.
-     *
-     *  Leave this value commented out to preserve all data stored
-     *  by user accounts regardless of inactivity.
-     */
-     //accountRetentionTime: 365,
-
-    /*  Starting with CryptPad 3.23.0, the server automatically runs
-     *  the script responsible for removing inactive data according to
-     *  your configured definition of inactivity. Set this value to `true`
-     *  if you prefer not to remove inactive data, or if you prefer to
-     *  do so manually using `scripts/evict-inactive.js`.
-     */
-    //disableIntegratedEviction: true,
-
-
-    /*  Max Upload Size (bytes)
-     *  this sets the maximum size of any one file uploaded to the server.
-     *  anything larger than this size will be rejected
-     *  defaults to 20MB if no value is provided
-     */
-    //maxUploadSize: 20 * 1024 * 1024,
-
-    /*  Users with premium accounts (those with a plan included in their customLimit)
-     *  can benefit from an increased upload size limit. By default they are restricted to the same
-     *  upload size as any other registered user.
-     *
-     */
-    //premiumUploadSize: 100 * 1024 * 1024,
-
-    /* =====================
-     *   DATABASE VOLUMES
-     * ===================== */
-
-    /*
-     * We need this config entry, else CryptPad will try to mkdir
-     * some stuff into Nix store apparently...
-     */
-    base: '/mnt/data',
-
-    /*
-     *  CryptPad stores each document in an individual file on your hard drive.
-     *  Specify a directory where files should be stored.
-     *  It will be created automatically if it does not already exist.
-     */
-    filePath: '/mnt/datastore/',
-
-    /*  CryptPad offers the ability to archive data for a configurable period
-     *  before deleting it, allowing a means of recovering data in the event
-     *  that it was deleted accidentally.
-     *
-     *  To set the location of this archive directory to a custom value, change
-     *  the path below:
-     */
-    archivePath: '/mnt/data/archive',
-
-    /*  CryptPad allows logged in users to request that particular documents be
-     *  stored by the server indefinitely. This is called 'pinning'.
-     *  Pin requests are stored in a pin-store. The location of this store is
-     *  defined here.
-     */
-    pinPath: '/mnt/data/pins',
-
-    /*  if you would like the list of scheduled tasks to be stored in
-        a custom location, change the path below:
-    */
-    taskPath: '/mnt/data/tasks',
-
-    /*  if you would like users' authenticated blocks to be stored in
-        a custom location, change the path below:
-    */
-    blockPath: '/mnt/block',
-
-    /*  CryptPad allows logged in users to upload encrypted files. Files/blobs
-     *  are stored in a 'blob-store'. Set its location here.
-     */
-    blobPath: '/mnt/blob',
-
-    /*  CryptPad stores incomplete blobs in a 'staging' area until they are
-     *  fully uploaded. Set its location here.
-     */
-    blobStagingPath: '/mnt/data/blobstage',
-
-    decreePath: '/mnt/data/decrees',
-
-    /* CryptPad supports logging events directly to the disk in a 'logs' directory
-     * Set its location here, or set it to false (or nothing) if you'd rather not log
-     */
-    logPath: false,
-
-    /* =====================
-     *       Debugging
-     * ===================== */
-
-    /*  CryptPad can log activity to stdout
-     *  This may be useful for debugging
-     */
-    logToStdout: true,
-
-    /* CryptPad can be configured to log more or less
-     * the various settings are listed below by order of importance
-     *
-     * silly, verbose, debug, feedback, info, warn, error
-     *
-     * Choose the least important level of logging you wish to see.
-     * For example, a 'silly' logLevel will display everything,
-     * while 'info' will display 'info', 'warn', and 'error' logs
-     *
-     * This will affect both logging to the console and the disk.
-     */
-    logLevel: 'silly',
-
-    /*  clients can use the /settings/ app to opt out of usage feedback
-     *  which informs the server of things like how much each app is being
-     *  used, and whether certain clientside features are supported by
-     *  the client's browser. The intent is to provide feedback to the admin
-     *  such that the service can be improved. Enable this with `true`
-     *  and ignore feedback with `false` or by commenting the attribute
-     *
-     *  You will need to set your logLevel to include 'feedback'. Set this
-     *  to false if you'd like to exclude feedback from your logs.
-     */
-    logFeedback: false,
-
-    /*  CryptPad supports verbose logging
-     *  (false by default)
-     */
-    verbose: true,
-
-    /*  Surplus information:
-     *
-     *  'installMethod' is included in server telemetry to voluntarily
-     *  indicate how many instances are using unofficial installation methods
-     *  such as Docker.
-     *
-     */
-    installMethod: 'deuxfleurs.fr',
-};

cluster/prod/app/cryptpad/config/config.js

@@ -119,9 +119,7 @@ module.exports = {
       "[Jill@pad.deuxfleurs.fr/tLW7W8EVNB2KYETXEaOYR+HmNiBQtZj7u+SOxS3hGmg=]",
       "[vincent@pad.deuxfleurs.fr/07FQiE8w1iztRWwzbRJzEy3xIqnNR31mUFjLNiGXjwU=]",
       "[boris@pad.deuxfleurs.fr/kHo5LIhSxDFk39GuhGRp+XKlMjNe+lWfFWM75cINoTQ=]",
-      "[maximilien@pad.deuxfleurs.fr/UoXHLejYRUjvX6t55hAQKpjMdU-3ecg4eDhAeckZmyE=]",
+      "[maximilien@pad.deuxfleurs.fr/UoXHLejYRUjvX6t55hAQKpjMdU-3ecg4eDhAeckZmyE=]"
-      "[armael@pad.deuxfleurs.fr/CIKMvNdFxGavwTmni0TnR3x9GM0ypgx3DMcFyzppplU=]",
-      "[bjonglez@pad.deuxfleurs.fr/+RRzwcLPj5ZCWELUXMjmt3u+-lvYnyhpDt4cqAn9nh8=]"
     ],
 
     /* =====================
@@ -190,12 +188,6 @@ module.exports = {
      *   DATABASE VOLUMES
      * ===================== */
 
-    /*
-     * We need this config entry, else CryptPad will try to mkdir
-     * some stuff into Nix store apparently...
-     */
-    base: '/mnt/data',
-
     /*
      *  CryptPad stores each document in an individual file on your hard drive.
      *  Specify a directory where files should be stored.

cluster/prod/app/cryptpad/deploy/cryptpad.hcl

@@ -1,5 +1,5 @@
 job "cryptpad" {
-  datacenters = ["scorpio"]
+  datacenters = ["neptune"]
   type = "service"
 
   group "cryptpad" {
@@ -22,11 +22,11 @@ job "cryptpad" {
       constraint {
         attribute = "${attr.unique.hostname}"
         operator = "="
-        value = "abricot"
+        value = "courgette"
       }
 
       config {
-        image = "kokakiwi/cryptpad:2024.9.0"
+        image = "kokakiwi/cryptpad:2024.3.1"
         ports = [ "http" ]
 
         volumes = [
@@ -63,8 +63,6 @@ job "cryptpad" {
           "tricot pad-sandbox.deuxfleurs.fr",
           "tricot-add-header Cross-Origin-Resource-Policy cross-origin",
           "tricot-add-header Cross-Origin-Embedder-Policy require-corp",
-          "tricot-add-header Access-Control-Allow-Origin *",
-          "tricot-add-header Access-Control-Allow-Credentials true",
           "d53-cname pad.deuxfleurs.fr",
           "d53-cname pad-sandbox.deuxfleurs.fr",
         ]

cluster/prod/app/email/config/postfix/main.cf

@@ -83,14 +83,11 @@ smtpd_forbid_unauth_pipelining = yes
 smtpd_discard_ehlo_keywords = chunking
 smtpd_forbid_bare_newline = yes
 
+smtpd_client_connection_rate_limit = 2
+
 #===
 # Rate limiting
 #===
-smtpd_client_connection_rate_limit = 2
-# do not rate-limit ourselves
-# in particular, useful for forgejo who opens a lot of SMTP connections
-smtpd_client_event_limit_exceptions = $mynetworks /etc/postfix/rate-limit-exceptions
-
 slow_destination_recipient_limit = 20
 slow_destination_concurrency_limit = 2
 

cluster/prod/app/email/deploy/email-android7.hcl

@@ -1,6 +1,5 @@
 job "email-android7" {
-  # Should not run on the same site as email.hcl (port conflict in diplonat)
+  datacenters = ["neptune", "bespin"]
-  datacenters = ["scorpio", "bespin"]
   type = "service"
   priority = 100
 
@@ -42,7 +41,7 @@ job "email-android7" {
 
       resources {
         cpu = 50
-        memory = 200
+        memory = 50
       }
 
       service {
@@ -96,7 +95,7 @@ job "email-android7" {
 
       resources {
         cpu = 50
-        memory = 200
+        memory = 50
       }
 
       service {

cluster/prod/app/email/deploy/email.hcl

@@ -1,6 +1,5 @@
 job "email" {
-  # Should not run on the same site as email-android7.hcl (port conflict in diplonat)
+  datacenters = ["neptune"]
-  datacenters = ["scorpio"]
   type = "service"
   priority = 65
 
@@ -32,7 +31,7 @@ job "email" {
       constraint {
         attribute = "${attr.unique.hostname}"
         operator = "="
-        value = "ananas"
+        value = "celeri"
       }
 
       config {
@@ -382,29 +381,6 @@ job "email" {
         destination = "secrets/postfix/transport"
       }
 
-      template {
-        # Collect machine IPs from the cluster.
-        # We use intermediate maps to ensure we get a sorted list with no duplicates,
-        # so that it is robust wrt. changes in the order of the output of ls or
-        # addition of new machines in an existing site.
-        # (scratch.MapValues returns the list of *values* in the map, sorted by *key*)
-        data = <<EOH
-        {{- range ls "diplonat/autodiscovery/ipv4" }}
-          {{- with $a := .Value | parseJSON }}
-            {{- scratch.MapSet "ipv4" $a.address $a.address }}
-          {{- end }}
-        {{- end -}}
-        {{- range ls "diplonat/autodiscovery/ipv6" }}
-          {{- with $a := .Value | parseJSON }}
-            {{- scratch.MapSet "ipv6" $a.address $a.address }}
-          {{- end }}
-        {{- end -}}
-        {{- range scratch.MapValues "ipv4" }}{{ . }} {{ end }}
-        {{- range scratch.MapValues "ipv6" }}[{{ . }}] {{ end }}
-        EOH
-        destination = "secrets/postfix/rate-limit-exceptions"
-      }
-
       # --- secrets ---
       template {
         data = "{{ with $d := key \"tricot/certs/smtp.deuxfleurs.fr\" | parseJSON }}{{ $d.cert_pem }}{{ end }}"

cluster/prod/app/garage/deploy/garage.hcl

@@ -1,5 +1,5 @@
 job "garage" {
-  datacenters = ["neptune", "bespin", "scorpio", "corrin"]
+  datacenters = [ "neptune", "bespin", "scorpio" ]
   type = "system"
   priority = 80
 

cluster/prod/app/guichet/deploy/guichet.hcl

@@ -1,5 +1,5 @@
 job "guichet" {
-  datacenters = ["corrin", "neptune", "scorpio"]
+  datacenters = [ "neptune", "scorpio" ]
   type = "service"
   priority = 90
 
@@ -28,11 +28,7 @@ job "guichet" {
       }
 
       resources {
-        # limite de mémoire un peu élevée par précaution.
+        memory = 200
-        # avec 200M, j'ai observé guichet se faire OOM-killed au moment
-        # où un nouvel utilisateur clique sur un lien d'invitation
-        # fraichement généré.
-        memory = 300
       }
 
       service {

cluster/prod/app/jitsi/build/docker-compose.yml

@@ -6,17 +6,16 @@ services:
       context: ./jitsi-meet
       args:
         # https://github.com/jitsi/jitsi-meet
-        MEET_TAG: stable/jitsi-meet_9646
+        MEET_TAG: stable/jitsi-meet_8252
-        NODE_MAJOR_VERSION: 22
+    image: superboum/amd64_jitsi_meet:v6
-    image: superboum/amd64_jitsi_meet:v7
 
   jitsi-conference-focus:
     build:
       context: ./jitsi-conference-focus
       args:
         # https://github.com/jitsi/jicofo
-        JICOFO_TAG: stable/jitsi-meet_9646
+        JICOFO_TAG: stable/jitsi-meet_8252
-    image: superboum/amd64_jitsi_conference_focus:v11
+    image: superboum/amd64_jitsi_conference_focus:v10
 
   jitsi-videobridge:
     build:
@@ -24,13 +23,13 @@ services:
       args:
         # https://github.com/jitsi/jitsi-videobridge
         # note: JVB is not tagged with non-stable tags
-        JVB_TAG: stable/jitsi-meet_9646
+        JVB_TAG: stable/jitsi-meet_8252
-    image: superboum/amd64_jitsi_videobridge:v22
+    image: superboum/amd64_jitsi_videobridge:v21
 
   jitsi-xmpp:
     build:
       context: ./jitsi-xmpp
       args:
-        MEET_TAG: stable/jitsi-meet_9646
+        MEET_TAG: stable/jitsi-meet_8252
-        PROSODY_VERSION: 0.12.3-1
+        PROSODY_VERSION: 1nightly191-1~bookworm
-    image: superboum/amd64_jitsi_xmpp:v12
+    image: superboum/amd64_jitsi_xmpp:v11

cluster/prod/app/jitsi/build/jitsi-meet/Dockerfile

@@ -1,9 +1,8 @@
 FROM debian:bookworm AS builder
 
-ARG NODE_MAJOR_VERSION
 RUN apt-get update && \
     apt-get install -y curl && \
-    curl -sL https://deb.nodesource.com/setup_${NODE_MAJOR_VERSION}.x | bash - && \
+    curl -sL https://deb.nodesource.com/setup_19.x | bash - && \
     apt-get install -y git nodejs make git unzip
 
 ARG MEET_TAG

cluster/prod/app/jitsi/build/jitsi-videobridge/jvb_run

@@ -6,7 +6,7 @@ if [ -z "${JITSI_NAT_LOCAL_IP}" ]; then
 fi
 
 if [ -z "${JITSI_NAT_PUBLIC_IP}" ]; then
-  JITSI_NAT_PUBLIC_IP=$(curl -4 https://ifconfig.me)
+  JITSI_NAT_PUBLIC_IP=$(curl https://ifconfig.me)
 fi
 
 echo "NAT config: ${JITSI_NAT_LOCAL_IP} -> ${JITSI_NAT_PUBLIC_IP}"

cluster/prod/app/jitsi/build/jitsi-xmpp/Dockerfile

@@ -13,8 +13,8 @@ RUN apt-get update && \
     apt-get install -y wget gnupg2 extrepo && \
     extrepo enable prosody && \
     apt-get update && \
-    apt-cache show prosody && \
+    apt-cache show prosody-0.12 && \
-    apt-get install -y prosody=${PROSODY_VERSION} lua-event
+    apt-get install -y prosody-0.12=${PROSODY_VERSION} lua-event
 
 RUN mkdir -p /usr/local/share/ca-certificates/ && \
     ln -sf \

cluster/prod/app/jitsi/config/nginx.conf

@@ -81,12 +81,6 @@ http {
       alias /srv/jitsi-meet/$1/$2;
     }
 
-    # Disallow robots indexation 
-    location = /robots.txt {
-      add_header  Content-Type  text/plain;
-      return 200 "User-agent: *\nDisallow: /\n";
-    }
-
     # not used yet VVV
     # colibri (JVB) websockets
     #location ~ ^/colibri-ws/([a-zA-Z0-9-\.]+)/(.*) {
@@ -98,12 +92,12 @@ http {
     #}
 
 
-    location ~* {{ key "secrets/jitsi/blacklist_regex" }} {
+    location ~ "2daut2wank2|2duat2wank|2duat2wank0|2duat2wank1|2duat2wank2|2duat2wank3|2duatr2wank|2duatr2wank0|2duatr2wank1|2duatr2wank2|2wank2daut2|daut1|duat2wank|duat2wank2|duatr2wank2|prettypanties|slutgfs|wabk2daugther|wank2daugther|wank2daut|wank2daut2|wank2daut3|wankwatch" {
       return 302 https://www.service-public.fr/particuliers/vosdroits/R17674; 
     }
 
     location = /http-bind {
-	if ($args ~* {{ key "secrets/jitsi/blacklist_regex" }}) {
+	if ($args ~ "2daut2wank2|2duat2wank|2duat2wank0|2duat2wank1|2duat2wank2|2duat2wank3|2duatr2wank|2duatr2wank0|2duatr2wank1|2duatr2wank2|2wank2daut2|daut1|duat2wank|duat2wank2|duatr2wank2|prettypanties|slutgfs|wabk2daugther|wank2daugther|wank2daut|wank2daut2|wank2daut3|wankwatch") {
 	    return 403 'forbidden';
 	}
 

cluster/prod/app/jitsi/config/videobridge.conf

@@ -115,8 +115,7 @@ videobridge {
     # (e.g. health or debug stats)
     private {
       # See JettyBundleActivatorConfig in Jicoco for values
-      host = 0.0.0.0
+      host = 127.0.0.1
-      port = {{ env "NOMAD_PORT_management_port" }}
     }
   }
   octo {

cluster/prod/app/jitsi/deploy/jitsi.hcl

@@ -1,5 +1,5 @@
 job "jitsi" {
-  datacenters = ["neptune", "scorpio", "corrin"]
+  datacenters = ["neptune", "scorpio"]
   type = "service"
 
   priority = 50
@@ -20,7 +20,7 @@ job "jitsi" {
     task "xmpp" {
       driver = "docker"
       config {
-        image = "superboum/amd64_jitsi_xmpp:v12"
+        image = "superboum/amd64_jitsi_xmpp:v11"
         ports = [ "bosh_port", "xmpp_port" ]
         network_mode = "host"
         volumes = [
@@ -101,7 +101,7 @@ EOF
     task "front" {
       driver = "docker"
       config {
-        image = "superboum/amd64_jitsi_meet:v7"
+        image = "superboum/amd64_jitsi_meet:v6"
         network_mode = "host"
         ports = [ "https_port" ]
         volumes = [
@@ -168,7 +168,7 @@ EOF
     task "jicofo" {
       driver = "docker"
       config {
-        image = "superboum/amd64_jitsi_conference_focus:v11"
+        image = "superboum/amd64_jitsi_conference_focus:v10"
         network_mode = "host"
         volumes = [
           "secrets/certs/jitsi.crt:/usr/local/share/ca-certificates/jitsi.crt",
@@ -203,15 +203,14 @@ EOF
   group "data_plane" {
     network {
       port "video_port" { static = 8080 }
-      port "management_port" { static = 8000 }
     }
 
     task "videobridge" {
       driver = "docker"
       config {
-        image = "superboum/amd64_jitsi_videobridge:v22"
+        image = "superboum/amd64_jitsi_videobridge:v21"
         network_mode = "host"
-        ports = [ "video_port", "management_port" ] 
+        ports = [ "video_port" ] 
         ulimit {
           nofile = "1048576:1048576"
           nproc = "65536:65536"
@@ -260,16 +259,9 @@ EOF
         port = "video_port"
         address_mode = "host"
         name = "video-jitsi"
-      }
-
-      service {
-        tags = [ "jitsi" ]
-        port = "management_port"
-        address_mode = "host"
-        name = "management-video-jitsi"
         check {
           type = "tcp"
-          port = "management_port"
+          port = "video_port"
           interval = "60s"
           timeout = "5s"
         }

cluster/prod/app/jitsi/integration/README.md

@@ -52,7 +52,7 @@ But maybe this value is deprecated: the check is still here but it is not used a
 start a maintainance container
 
 ```
-docker run --rm -it -v `pwd`/prosody/certs/:/var/lib/prosody/ -v `pwd`/prosody/prosody.cfg.lua:/etc/prosody/prosody.cfg.lua:ro --user root superboum/amd64_jitsi_xmpp:v12 bash
+docker run --rm -it -v `pwd`/prosody/certs/:/var/lib/prosody/ -v `pwd`/prosody/prosody.cfg.lua:/etc/prosody/prosody.cfg.lua:ro --user root superboum/amd64_jitsi_xmpp:v11 bash
 ```
 
 then generate certificates from inside this container

cluster/prod/app/jitsi/integration/docker-compose.yml

@@ -1,7 +1,7 @@
 version: '3.4'
 services:
   jitsi-xmpp:
-    image: superboum/amd64_jitsi_xmpp:v12
+    image: superboum/amd64_jitsi_xmpp:v11
     volumes:
       - "./prosody/prosody.cfg.lua:/etc/prosody/prosody.cfg.lua:ro"
       - "./prosody/certs/jitsi.crt:/var/lib/prosody/jitsi.crt:ro"
@@ -11,19 +11,16 @@ services:
     environment:
       - JICOFO_AUTH_PASSWORD=jicofopass
       - JVB_AUTH_PASSWORD=jvbpass
-    ports:
-      - "5222:5222/tcp"
  
   jitsi-conference-focus:
-    image: superboum/amd64_jitsi_conference_focus:v11
+    image: superboum/amd64_jitsi_conference_focus:v10
     volumes:
       - "./prosody/certs/jitsi.crt:/usr/local/share/ca-certificates/jitsi.crt:ro"
       - "./prosody/certs/auth.jitsi.crt:/usr/local/share/ca-certificates/auth.jitsi.crt:ro"
       - "./jicofo/jicofo.conf:/etc/jitsi/jicofo.conf:ro"
 
   jitsi-videobridge:
-    image: superboum/amd64_jitsi_videobridge:v22
+    image: superboum/amd64_jitsi_videobridge:v21
-    network_mode: "host"
     volumes:
       - "./prosody/certs/jitsi.crt:/usr/local/share/ca-certificates/jitsi.crt:ro"
       - "./prosody/certs/auth.jitsi.crt:/usr/local/share/ca-certificates/auth.jitsi.crt:ro"
@@ -34,7 +31,7 @@ services:
       - "10000:10000/udp"
 
   jitsi-meet:
-    image: superboum/amd64_jitsi_meet:v7
+    image: superboum/amd64_jitsi_meet:v6
     volumes:
       - "./prosody/certs/jitsi.crt:/etc/nginx/jitsi.crt:ro"
       - "./prosody/certs/jitsi.key:/etc/nginx/jitsi.key:ro"

cluster/prod/app/jitsi/integration/jvb/videobridge.conf

@@ -62,7 +62,7 @@ videobridge {
 
       configs {
         unique-xmpp-server {
-          hostname="172.17.0.1"
+          hostname="jitsi-xmpp"
           domain = "auth.jitsi"
           username = "jvb"
           password = "jvbpass"

cluster/prod/app/jitsi/integration/meet/config.js

@@ -22,7 +22,7 @@ var config = {
     },
 
     // BOSH URL. FIXME: use XEP-0156 to discover it.
-    bosh: '//[2a0c:e303:0:2a00::de6]/http-bind',
+    bosh: '//192.168.1.143/http-bind',
 
     // Websocket URL
     // websocket: 'wss://jitsi-meet.example.com/xmpp-websocket',

cluster/prod/app/matrix/README.md

@@ -1,14 +0,0 @@
-# Informations relatives à la config Matrix
-
-## Ressources
-
-- La doc de Synapse est là : https://element-hq.github.io/synapse/latest/welcome_and_overview.html
-
-### Métriques 
-
-- La page pour configurer les metrics : https://element-hq.github.io/synapse/latest/usage/configuration/config_documentation.html?highlight=metrics#metrics
-- La page pour le tutoriel sur configurer les metrics avec Prometheus : https://element-hq.github.io/synapse/latest/metrics-howto.html?highlight=metrics#how-to-monitor-synapse-metrics-using-prometheus
-
----
-
-> Avec Nix on n'aurait pas tous ces problèmes.

cluster/prod/app/matrix/build/docker-compose.yml

@@ -6,18 +6,18 @@ services:
       context: ./riotweb
       args:
         # https://github.com/vector-im/element-web/releases
-        VERSION: v1.11.78
+        VERSION: 1.11.49
-    image: particallydone/amd64_elementweb:v36
+    image: lxpz/amd64_elementweb:v35
 
   synapse:
     build:
       context: ./matrix-synapse
       args:
         # https://github.com/matrix-org/synapse/releases
-        VERSION: v1.104.0
+        VERSION: 1.95.1
         # https://github.com/matrix-org/synapse-s3-storage-provider/commits/main
         # Update with the latest commit on main each time you update the synapse version
         # otherwise synapse may fail to launch due to incompatibility issues
         # see this issue for an example: https://github.com/matrix-org/synapse-s3-storage-provider/issues/64
-        S3_VERSION: 2c46a764f700e6439afa11c00db827ddf21a9e89
+        S3_VERSION: v1.2.1
-    image: particallydone/amd64_synapse:v60
+    image: lxpz/amd64_synapse:v58

cluster/prod/app/matrix/build/matrix-synapse/Dockerfile

@@ -1,4 +1,4 @@
-FROM amd64/debian:trixie AS builder
+FROM amd64/debian:bookworm as builder
 
 ARG VERSION
 ARG S3_VERSION
@@ -22,25 +22,21 @@ RUN apt-get update && \
       libpq-dev \
       virtualenv \
       libxslt1-dev \
-      git
+      git && \
-
+    virtualenv /root/matrix-env -p /usr/bin/python3 && \
-RUN virtualenv /root/matrix-env -p /usr/bin/python3 && \
     . /root/matrix-env/bin/activate && \
     pip3 install \
-      https://github.com/element-hq/synapse/archive/${VERSION}.tar.gz#egg=matrix-synapse[matrix-synapse-ldap3,postgres,resources.consent,saml2,url_preview] && \
+      https://github.com/matrix-org/synapse/archive/v${VERSION}.tar.gz#egg=matrix-synapse[matrix-synapse-ldap3,postgres,resources.consent,saml2,url_preview] && \
     pip3 install \
       git+https://github.com/matrix-org/synapse-s3-storage-provider.git@${S3_VERSION}
 
-# WARNING: trixie n'est pas une LTS
+FROM amd64/debian:bookworm
-# mais on est obligé d'avoir la même version que le builder
-# et le builder veut une version de rustc qui n'est pas dans bookworm (dernière LTS at the time of writing)
-FROM amd64/debian:trixie
 
 RUN apt-get update && \
     apt-get -qq -y full-upgrade && \
     apt-get install -y \
       python3 \
-      python3-setuptools \
+      python3-distutils \
       libffi8 \
       libjpeg62-turbo \
       libssl3 \

cluster/prod/app/matrix/build/riotweb/Dockerfile

@@ -1,16 +1,13 @@
-FROM amd64/debian:trixie as builder
+FROM amd64/debian:buster as builder
 
 ARG VERSION
 WORKDIR /root
 
 RUN apt-get update && \
-    apt-get install -y wget
+    apt-get install -y wget && \
+    wget https://github.com/vector-im/element-web/releases/download/v${VERSION}/element-v${VERSION}.tar.gz && \
+    tar xf element-v${VERSION}.tar.gz && \
+    mv element-v${VERSION}/ riot/
 
-RUN wget https://github.com/element-hq/element-web/releases/download/${VERSION}/element-${VERSION}.tar.gz && \
-    tar xf element-${VERSION}.tar.gz && \
-    mv element-${VERSION}/ riot/
-
-# Le conteneur de superboum contient uniquement un serveur web de 5 lignes.
-# Ca vous ennuie ? On peut publier Riot dans un bucket web Garage, tkt, ça sera Tricot qui servira.
 FROM superboum/amd64_webserver:v3
 COPY --from=builder /root/riot /srv/http

cluster/prod/app/matrix/deploy/im.hcl

@@ -15,7 +15,7 @@ job "matrix" {
       driver = "docker"
 
       config {
-        image = "particallydone/amd64_synapse:v60"
+        image = "lxpz/amd64_synapse:v58"
         network_mode = "host"
         readonly_rootfs = true
         ports = [ "api_port" ]
@@ -101,7 +101,7 @@ job "matrix" {
       driver = "docker"
 
       config {
-        image = "particallydone/amd64_synapse:v60"
+        image = "lxpz/amd64_synapse:v58"
         readonly_rootfs = true
         command = "/usr/local/bin/matrix-s3-async"
         work_dir = "/tmp"
@@ -137,7 +137,7 @@ EOH
     task "riotweb" {
       driver = "docker"
       config {
-        image = "particallydone/amd64_elementweb:v36"
+        image = "lxpz/amd64_elementweb:v35"
         ports = [ "web_port" ]
         volumes = [
           "secrets/config.json:/srv/http/config.json"
@@ -190,7 +190,7 @@ EOH
       driver = "docker"
 
       config {
-        image = "ghcr.io/matrix-org/sliding-sync:v0.99.16"
+        image = "ghcr.io/matrix-org/sliding-sync:v0.99.12"
         ports = [ "syncv3_api", "syncv3_metrics" ]
       }
 

cluster/prod/app/plume/deploy/plume.hcl

@@ -1,5 +1,5 @@
 job "plume-blog" {
-  datacenters = ["corrin", "neptune", "scorpio"]
+  datacenters = ["scorpio", "neptune"]
   type = "service"
 
   group "plume" {

cluster/prod/app/telemetry/config/prometheus.yml

@@ -26,16 +26,6 @@ scrape_configs:
         cert_file: /etc/prometheus/consul-client.crt
         key_file: /etc/prometheus/consul-client.key
 
-  - job_name: 'jitsi-videobridge'
-    consul_sd_configs:
-    - server: 'https://localhost:8501'
-      services:
-        - 'management-video-jitsi'
-      tls_config:
-        ca_file: /etc/prometheus/consul-ca.crt
-        cert_file: /etc/prometheus/consul-client.crt
-        key_file: /etc/prometheus/consul-client.key
-
   - job_name: 'garage'
     authorization:
       type: Bearer

cluster/prod/app/telemetry/deploy/telemetry-service.hcl

@@ -1,5 +1,5 @@
 job "telemetry-service" {
-  datacenters = ["corrin", "scorpio"]
+  datacenters = ["neptune", "scorpio"]
   type = "service"
 
   group "grafana" {

cluster/prod/app/telemetry/deploy/telemetry-storage.hcl

@@ -1,5 +1,5 @@
 job "telemetry-storage" {
-  datacenters = ["scorpio", "bespin"]
+  datacenters = ["neptune", "bespin"]
   type = "service"
 
   group "prometheus" {
@@ -14,13 +14,13 @@ job "telemetry-storage" {
     constraint {
       attribute = "${attr.unique.hostname}"
       operator = "set_contains_any"
-      value = "ananas,df-ymk"
+      value = "celeri,df-ymk"
     }
 
     task "prometheus" {
       driver = "docker"
       config {
-        image = "prom/prometheus:v2.50.1"
+        image = "prom/prometheus:v2.46.0"
         network_mode = "host"
         ports = [ "prometheus" ]
         args = [

cluster/prod/app/telemetry/deploy/telemetry-system.hcl

@@ -1,5 +1,5 @@
 job "telemetry-system" {
-	datacenters = ["neptune", "scorpio", "bespin", "corrin"]
+	datacenters = ["neptune", "scorpio", "bespin"]
 	type = "system"
 	priority = "100"
 
@@ -12,7 +12,7 @@ job "telemetry-system" {
 			driver = "docker"
 
 			config {
-				image = "quay.io/prometheus/node-exporter:v1.7.0"
+				image = "quay.io/prometheus/node-exporter:v1.6.1"
 				network_mode = "host"
 				volumes = [
 					"/:/host:ro,rslave"

cluster/prod/app/woodpecker-ci/deploy/server.hcl

@@ -23,7 +23,7 @@ job "woodpecker-ci" {
     task "server" {
       driver = "docker"
       config {
-        image = "woodpeckerci/woodpecker-server:v2.7.1"
+        image = "woodpeckerci/woodpecker-server:v2.4.1"
         ports = [ "web_port", "grpc_port" ]
         network_mode = "host"
       }
@@ -121,7 +121,6 @@ http {
     listen [::]:14453 ssl;
     http2 on;
     server_name woodpecker.deuxfleurs.fr;
-    resolver 127.0.0.1 valid=30s;
 
     ssl_certificate "/etc/ssl/certs/woodpecker.cert";
     ssl_certificate_key "/etc/ssl/certs/woodpecker.key";

cluster/prod/cluster.nix

@@ -49,19 +49,19 @@
       siteName = "bespin";
       publicKey = "bIjxey/VhBgVrLa0FxN/KISOt2XFmQeSh1MPivUq9gg=";
       address = "10.83.3.1";
-      endpoint = "109.130.116.21:33731";
+      endpoint = "109.136.139.78:33731";
     };
     "df-ymf" = {
       siteName = "bespin";
       publicKey = "pUIKv8UBl586O7DBrHBsb9BgNU7WlYQ2r2RSNkD+JAQ=";
       address = "10.83.3.2";
-      endpoint = "109.130.116.21:33732";
+      endpoint = "109.136.139.78:33732";
     };
     "df-ymk" = {
       siteName = "bespin";
       publicKey = "VBmpo15iIJP7250NAsF+ryhZc3j+8TZFnE1Djvn5TXI=";
       address = "10.83.3.3";
-      endpoint = "109.130.116.21:33733";
+      endpoint = "109.136.139.78:33733";
     };
     "abricot" = {
       siteName = "scorpio";
@@ -93,24 +93,6 @@
       address = "10.83.5.3";
       endpoint = "82.64.238.84:33742";
     };
-    "ortie" = {
-      siteName = "dathomir";
-      publicKey = "tbx2mvt3TN3Xd+ermwwZ6it80VWT5949cKH9BRFgvzE=";
-      address = "10.83.5.4";
-      endpoint = "82.64.238.84:33743";
-    };
-    "pamplemousse" = {
-      siteName = "corrin";
-      publicKey = "6y5GrNXEql12AObuSfOHGxxUKpdlcyapu+juLYOEBhc=";
-      address = "10.83.6.1";
-      endpoint = "45.81.62.36:33731";
-    };
-    "pasteque" = {
-      siteName = "corrin";
-      publicKey = "7vPq0z6JVxTLEebasUlR5Uu4dAFZxfddhjWtIYhCoXw=";
-      address = "10.83.6.2";
-      endpoint = "45.81.62.36:33732";
-    };
   };
 
   # Pin Nomad version
@@ -120,9 +102,9 @@
   # Bootstrap IPs for Consul cluster,
   # these are IPs on the Wireguard overlay
   services.consul.extraConfig.retry_join = [
+    "10.83.1.1"  # concombre
+    "10.83.2.1"  # dahlia
     "10.83.3.1"  # df-ykl
-    "10.83.4.2"  # ananas
-    "10.83.6.1"  # pamplemousse
   ];
 
   deuxfleurs.adminAccounts = {

cluster/prod/known_hosts

@@ -12,6 +12,3 @@ ananas.machine.deuxfleurs.fr ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIHs0zAyBy70oyV5
 onion.machine.deuxfleurs.fr ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAINjBQ67fxwuDDzRPveTko/Sgf0cev3tIvlr3CfAmhF0C
 oseille.machine.deuxfleurs.fr ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIAgQdQ5UVFFn+DXN90ut9+V7NtEopQJnES3r8soKTZW4
 io.machine.deuxfleurs.fr ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIIvgCJ7Jew7ou1RZuaT41Sd+ucZAgxUwtdieqNqoC3+T
-ortie.machine.deuxfleurs.fr ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIMqtfIPLk8a5tM6Upj7GQwlIS16nBPrZYVXE2FVlO2Yn
-pamplemousse.machine.deuxfleurs.fr ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIAI0M5qny9yQ6LNzWqPfSlOWwTYpvxQtuSpFiOb6aVtA
-2001:912:1ac0:2200::201 ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIAI0M5qny9yQ6LNzWqPfSlOWwTYpvxQtuSpFiOb6aVtA

cluster/prod/node/concombre.nix

@@ -11,4 +11,5 @@
   deuxfleurs.hostName = "concombre";
   deuxfleurs.staticIPv4.address = "192.168.1.31";
   deuxfleurs.staticIPv6.address = "2001:910:1204:1::31";
+  deuxfleurs.isRaftServer = true;
 }

cluster/prod/node/dahlia.nix

@@ -5,10 +5,9 @@
 {
   # Use the systemd-boot EFI boot loader.
   boot.loader.systemd-boot.enable = true;
-  boot.loader.timeout = 5;
   boot.loader.efi.canTouchEfiVariables = true;
 
-  deuxfleurs.hostName = "pasteque";
+  deuxfleurs.hostName = "dahlia";
-  deuxfleurs.staticIPv4.address = "192.168.5.202";
+  deuxfleurs.staticIPv4.address = "192.168.1.11";
-  deuxfleurs.staticIPv6.address = "2001:912:1ac0:2200::202";
+  deuxfleurs.staticIPv6.address = "2a01:e0a:28f:5e60::11";
 }

cluster/prod/node/dahlia.site.nix

@@ -0,0 +1 @@
+../site/orion.nix

cluster/prod/node/diplotaxis.nix

@@ -0,0 +1,14 @@
+# Configuration file local to this node
+
+{ config, pkgs, ... }:
+
+{
+  # Use the GRUB 2 boot loader.
+  boot.loader.grub.enable = true;
+  boot.loader.grub.version = 2;
+  boot.loader.grub.device = "/dev/nvme0n1"; # or "nodev" for efi only
+
+  deuxfleurs.hostName = "diplotaxis";
+  deuxfleurs.staticIPv4.address = "192.168.1.12";
+  deuxfleurs.staticIPv6.address = "2a01:e0a:28f:5e60::12";
+}

cluster/prod/node/diplotaxis.site.nix

@@ -0,0 +1 @@
+../site/orion.nix

cluster/prod/node/doradille.nix

@@ -0,0 +1,14 @@
+# Configuration file local to this node
+
+{ config, pkgs, ... }:
+
+{
+  # Use the GRUB 2 boot loader.
+  boot.loader.grub.enable = true;
+  boot.loader.grub.version = 2;
+  boot.loader.grub.device = "/dev/nvme0n1"; # or "nodev" for efi only
+
+  deuxfleurs.hostName = "doradille";
+  deuxfleurs.staticIPv4.address = "192.168.1.13";
+  deuxfleurs.staticIPv6.address = "2a01:e0a:28f:5e60::13";
+}

cluster/prod/node/doradille.site.nix

@@ -0,0 +1 @@
+../site/orion.nix

cluster/prod/node/ortie.nix

@@ -1,12 +0,0 @@
-{ ... }:
-{
-  boot.loader.systemd-boot.enable = true;
-  boot.loader.timeout = 20;
-  boot.loader.efi.canTouchEfiVariables = true;
-
-  services.openssh.ports = [ 22 33604 ];
-
-  deuxfleurs.hostName = "ortie";
-  deuxfleurs.staticIPv4.address = "192.168.1.37";
-  deuxfleurs.staticIPv6.address = "2a01:e0a:5e4:1d0:223:24ff:feb0:1b9";
-}

cluster/prod/node/ortie.site.nix

@@ -1 +0,0 @@
-../site/dathomir.nix

cluster/prod/node/pamplemousse.nix

@@ -1,15 +0,0 @@
-# Configuration file local to this node
-
-{ config, pkgs, ... }:
-
-{
-  # Use the systemd-boot EFI boot loader.
-  boot.loader.systemd-boot.enable = true;
-  boot.loader.timeout = 5;
-  boot.loader.efi.canTouchEfiVariables = true;
-
-  deuxfleurs.hostName = "pamplemousse";
-  deuxfleurs.staticIPv4.address = "192.168.5.201";
-  deuxfleurs.staticIPv6.address = "2001:912:1ac0:2200::201";
-  deuxfleurs.isRaftServer = true;
-}

cluster/prod/node/pamplemousse.site.nix

@@ -1 +0,0 @@
-../site/corrin.nix

cluster/prod/node/pasteque.site.nix

@@ -1 +0,0 @@
-../site/corrin.nix

cluster/prod/site/corrin.nix

@@ -1,8 +0,0 @@
-{ config, pkgs, ... }:
-
-{
-  deuxfleurs.siteName = "corrin";
-  deuxfleurs.staticIPv4.defaultGateway = "192.168.5.1";
-  deuxfleurs.cnameTarget = "corrin.site.deuxfleurs.fr.";
-  deuxfleurs.publicIPv4 = "45.81.62.36";
-}

cluster/prod/ssh_config

@@ -41,12 +41,3 @@ Host oseille
 
 Host io
   HostName io.machine.deuxfleurs.fr
-
-Host ortie
-  HostName ortie.machine.deuxfleurs.fr
-
-Host pamplemousse
-  HostName 2001:912:1ac0:2200::201
-
-Host pasteque
-  HostName 2001:912:1ac0:2200::202

cluster/staging/app/ci/deploy/albatros.hcl

@@ -1,5 +1,5 @@
 job "albatros" {
-  datacenters = ["neptune", "dathomir", "corrin", "bespin"]
+  datacenters = ["neptune", "jupiter", "corrin", "bespin"]
   type = "service"
   priority = 90
 

cluster/staging/app/ci/deploy/builder.hcl

@@ -2,7 +2,7 @@ job "builder" {
   namespace = "ci"
   type = "batch"
 
-  datacenters = ["neptune", "dathomir", "corrin", "bespin"]
+  datacenters = ["neptune", "jupiter", "corrin", "bespin"]
   priority = 100
 
   parameterized {

cluster/staging/app/core/deploy/d53.hcl

@@ -1,5 +1,5 @@
 job "core-d53" {
-  datacenters = ["neptune", "dathomir", "corrin", "bespin"]
+  datacenters = ["neptune", "jupiter", "corrin", "bespin"]
   type = "service"
   priority = 90
 

cluster/staging/app/core/deploy/diplonat.hcl

@@ -1,5 +1,5 @@
 job "core-diplonat" {
-  datacenters = ["neptune", "dathomir", "corrin", "bespin"]
+  datacenters = ["neptune", "jupiter", "corrin", "bespin"]
   type = "system"
   priority = 90
 
@@ -54,7 +54,7 @@ job "core-diplonat" {
         data = <<EOH
 DIPLONAT_REFRESH_TIME=60
 DIPLONAT_EXPIRATION_TIME=300
-DIPLONAT_IPV6_ONLY=true
+DIPLONAT_IPV6_ONLY={{ $site := env "meta.site" }}{{ if eq $site "corrin" }}false{{ else }}true{{ end }}
 DIPLONAT_CONSUL_NODE_NAME={{ env "attr.unique.hostname" }}
 DIPLONAT_CONSUL_URL=https://localhost:8501
 DIPLONAT_CONSUL_CA_CERT=/etc/diplonat/consul-ca.crt

cluster/staging/app/core/deploy/tricot.hcl

@@ -1,5 +1,5 @@
 job "core-tricot" {
-  datacenters = ["neptune", "dathomir", "corrin", "bespin"]
+  datacenters = ["neptune", "jupiter", "corrin", "bespin"]
   type = "system"
   priority = 90
 
@@ -21,25 +21,20 @@ job "core-tricot" {
     }
 
     task "server" {
-      driver = "docker"
+      driver = "nix2"
 
       config {
-        image = "armael/tricot:8sa24l6pxdppb5gq0nnj9kvcl9mijliy-block_user_agent"
+        packages = [
-        network_mode = "host"
+          "git+https://git.deuxfleurs.fr/Deuxfleurs/tricot.git?ref=main&rev=9bb505d977cb8bafd8039159241788ff25510d69"
-        readonly_rootfs = true
-        ports = [ "http_port", "https_port" ]
-        volumes = [
-          "secrets:/etc/tricot",
         ]
-        ulimit {
+        command = "tricot"
-          nofile = "65535:65535"
+        # cap_add = [ "net_bind_service" ]  # this doesn't work for whatever reason, so we need to put user = "root" instead
-        }
       }
+      user = "root"
 
       resources {
         cpu = 500
         memory = 200
-        memory_max = 500
       }
 
       restart {
@@ -51,17 +46,17 @@ job "core-tricot" {
 
       template {
         data = "{{ key \"secrets/consul/consul-ca.crt\" }}"
-        destination = "secrets/consul-ca.crt"
+        destination = "etc/tricot/consul-ca.crt"
       }
 
       template {
         data = "{{ key \"secrets/consul/consul-client.crt\" }}"
-        destination = "secrets/consul-client.crt"
+        destination = "etc/tricot/consul-client.crt"
       }
 
       template {
         data = "{{ key \"secrets/consul/consul-client.key\" }}"
-        destination = "secrets/consul-client.key"
+        destination = "etc/tricot/consul-client.key"
       }
 
       template {

cluster/staging/app/garage/deploy/garage.hcl

@@ -1,5 +1,5 @@
 job "garage-staging" {
-  datacenters = [ "neptune", "dathomir", "corrin", "bespin" ]
+  datacenters = [ "neptune", "jupiter", "corrin", "bespin" ]
   type = "system"
   priority = 90
 
@@ -192,9 +192,6 @@ job "garage-staging" {
             "tricot-add-header Access-Control-Allow-Origin *",
             "tricot-on-demand-tls-ask http://garage-staging-admin.service.staging.consul:3909/check",
             "tricot-site-lb",
-            "tricot-block-user-agent Claude-Web",
-            "tricot-block-user-agent ClaudeBot",
-            "tricot-block-user-agent anthropic-ai",
         ]
         port = "web"
         # Check 1: Garage is alive and answering TCP connections

cluster/staging/app/telemetry/config/prometheus.yml

@@ -38,27 +38,3 @@ scrape_configs:
         ca_file: /etc/prom/consul.crt
         cert_file: /etc/prom/consul-client.crt
         key_file: /etc/prom/consul-client.key
-
-  # see https://prometheus.io/docs/prometheus/latest/configuration/configuration/#static_config
-  # and https://www.nomadproject.io/api-docs/metrics
-  # and https://learn.hashicorp.com/tutorials/nomad/prometheus-metrics
-  # dashboard at https://grafana.com/grafana/dashboards/3800
-  - job_name: 'nomad'
-    scrape_interval: 10s
-    metrics_path: "/v1/metrics"
-    params:
-      format: ['prometheus']
-    scheme: 'https'
-    tls_config:
-      ca_file: /etc/prom/nomad-ca.crt
-      cert_file: /etc/prom/nomad-client.crt
-      key_file: /etc/prom/nomad-client.key
-      insecure_skip_verify: true
-    consul_sd_configs:
-    - server: 'https://localhost:8501'
-      services:
-        - 'nomad-client'
-      tls_config:
-        ca_file: /etc/prom/consul.crt
-        cert_file: /etc/prom/consul-client.crt
-        key_file: /etc/prom/consul-client.key

cluster/staging/app/telemetry/deploy/telemetry-service.hcl

@@ -1,5 +1,5 @@
 job "telemetry-service" {
-  datacenters = ["neptune", "dathomir", "corrin", "bespin"]
+  datacenters = ["neptune", "jupiter", "corrin", "bespin"]
   type = "service"
 
   group "prometheus" {
@@ -53,21 +53,6 @@ job "telemetry-service" {
         destination = "etc/prom/consul-client.key"
       }
 
-      template {
-        data = "{{ key \"secrets/nomad/nomad-ca.crt\" }}"
-        destination = "etc/prom/nomad-ca.crt"
-      }
-
-      template {
-        data = "{{ key \"secrets/nomad/nomad-client.crt\" }}"
-        destination = "etc/prom/nomad-client.crt"
-      }
-
-      template {
-        data = "{{ key \"secrets/nomad/nomad-client.key\" }}"
-        destination = "etc/prom/nomad-client.key"
-      }
-
       resources {
         memory = 500
         cpu = 200

cluster/staging/app/telemetry/deploy/telemetry-system.hcl

@@ -1,5 +1,5 @@
 job "telemetry-system" {
-  datacenters = ["neptune", "dathomir", "corrin", "bespin"]
+  datacenters = ["neptune", "jupiter", "corrin", "bespin"]
   type = "system"
   priority = "100"
 

cluster/staging/cluster.nix

@@ -14,7 +14,7 @@
       endpoint = "77.207.15.215:33723";
     };
     "origan" = {
-      siteName = "dathomir";
+      siteName = "jupiter";
       publicKey = "smBQYUS60JDkNoqkTT7TgbpqFiM43005fcrT6472llI=";
       address = "10.14.2.33";
       endpoint = "82.64.238.84:33733";

cluster/staging/node/origan.nix

@@ -1,4 +1,7 @@
-{ ... }:
+# Configuration file local to this node
+
+{ config, pkgs, ... }:
+
 {
   # Use the systemd-boot EFI boot loader.
   boot.loader.systemd-boot.enable = true;

cluster/staging/node/origan.site.nix

@@ -1 +1 @@
-../site/dathomir.nix
+../site/jupiter.nix

cluster/staging/site/dathomir.nix

@@ -1,6 +0,0 @@
-{ ... }:
-{
-  deuxfleurs.siteName = "dathomir";
-  deuxfleurs.staticIPv4.defaultGateway = "192.168.1.1";
-  deuxfleurs.cnameTarget = "dathomir.site.staging.deuxfleurs.org.";
-}

cluster/staging/site/jupiter.nix

@@ -0,0 +1,7 @@
+{ config, pkgs, ... }:
+
+{
+  deuxfleurs.siteName = "jupiter";
+  deuxfleurs.staticIPv4.defaultGateway = "192.168.1.1";
+  deuxfleurs.cnameTarget = "jupiter.site.staging.deuxfleurs.org.";
+}

nix/configuration.nix

@@ -78,6 +78,23 @@ SystemMaxUse=1G
   services.openssh.enable = true;
   services.openssh.settings.PasswordAuthentication = false;
 
+  # FIXME: Temporary patch for OpenSSH (CVE-2024-6387)
+  # Patches from backport PR: https://github.com/NixOS/nixpkgs/pull/323765
+  programs.ssh.package = pkgs.openssh.overrideAttrs(prev: {
+    patches = prev.patches ++ [
+      (pkgs.fetchpatch {
+        url = "https://raw.githubusercontent.com/emilazy/nixpkgs/c21c340818954576c6401ad460a9d42bab030bc4/pkgs/tools/networking/openssh/openssh-9.6_p1-CVE-2024-6387.patch";
+        hash = "sha256-B3Wz/eWSdOnrOcVzDv+QqzLGdFlb3jivQ8qZMC3d0Qw=";
+      })
+      (pkgs.fetchpatch {
+        url = "https://raw.githubusercontent.com/emilazy/nixpkgs/c21c340818954576c6401ad460a9d42bab030bc4/pkgs/tools/networking/openssh/openssh-9.6_p1-chaff-logic.patch";
+        hash = "sha256-lepBEFxKTAwg379iCD8KQCZVAzs3qNSSyUTOcartpK4=";
+      })
+    ];
+
+    doCheck = false;
+  });
+
   virtualisation.docker = {
     enable = true;
     extraOptions = "--config-file=${pkgs.writeText "daemon.json" (builtins.toJSON {