.gitignore

@@ -4,4 +4,3 @@ secrets/*
 cluster/*/secrets/*
 !cluster/*/secrets/*.sample
 
-adrn-notes/

cluster/prod/app/backup/README.md

@@ -1,32 +0,0 @@
-## Pour remonter locement un backup de PSQL fait par Nomad (backup-weekly.hcl)
-
-```bash
-export AWS_BUCKET=backups-pgbasebackup
-export AWS_ENDPOINT=s3.deuxfleurs.shirokumo.net
-export AWS_ACCESS_KEY_ID=$(consul kv get "secrets/postgres/backup/aws_access_key_id")
-export AWS_SECRET_ACCESS_KEY=$(consul kv get secrets/postgres/backup/aws_secret_access_key)
-export CRYPT_PUBLIC_KEY=$(consul kv get secrets/postgres/backup/crypt_public_key)
-```
-
-Et voilà le travail : 
-
-```bash
-$ aws s3 --endpoint https://$AWS_ENDPOINT ls
-2022-04-14 17:00:50 backups-pgbasebackup
-
-$ aws s3 --endpoint https://$AWS_ENDPOINT ls s3://backups-pgbasebackup
-                           PRE 2024-07-28 00:00:36.140539/
-                           PRE 2024-08-04 00:00:21.291551/
-                           PRE 2024-08-11 00:00:26.589762/
-                           PRE 2024-08-18 00:00:40.873939/
-                           PRE 2024-08-25 01:03:54.672763/
-                           PRE 2024-09-01 00:00:20.019605/
-                           PRE 2024-09-08 00:00:16.969740/
-                           PRE 2024-09-15 00:00:37.951459/
-                           PRE 2024-09-22 00:00:21.030452/
-
-$ aws s3 --endpoint https://$AWS_ENDPOINT ls "s3://backups-pgbasebackup/2024-09-22 00:00:21.030452/"
-2024-09-22 03:23:28     623490 backup_manifest
-2024-09-22 03:25:32 6037121487 base.tar.gz
-2024-09-22 03:25:33   19948939 pg_wal.tar.gz
-```

cluster/prod/app/backup/build/backup-psql/backup-psql.py

@@ -44,8 +44,6 @@ if not client.bucket_exists(bucket):
   abort(f"Bucket {bucket} does not exist or its access is forbidden, aborting")
 
 # Perform the backup locally
-# Via command-line:
-# pg_basebackup --host=localhost --username=$PSQL_USER --pgdata=. --format=tar  --wal-method=stream --gzip --compress=6 --progress --max-rate=5M
 try:
   ret = subprocess.run(["pg_basebackup",
     f"--host={psql_host}",

cluster/prod/app/backup/deploy/backup-daily.hcl

@@ -21,7 +21,7 @@ job "backup_daily" {
       driver = "docker"
 
       config {
-        image = "restic/restic:0.16.4"
+        image = "restic/restic:0.16.0"
         entrypoint = [ "/bin/sh", "-c" ]
         args = [ "restic backup /mail && restic forget --group-by paths --keep-within 1m1d --keep-within-weekly 3m --keep-within-monthly 1y && restic prune --max-unused 50% --max-repack-size 2G && restic check" ]
         volumes = [
@@ -116,7 +116,7 @@ EOH
       driver = "docker"
 
       config {
-        image = "restic/restic:0.16.4"
+        image = "restic/restic:0.16.0"
         entrypoint = [ "/bin/sh", "-c" ]
         args = [ "restic backup $NOMAD_ALLOC_DIR/consul.json && restic forget --group-by paths --keep-within 1m1d --keep-within-weekly 3m --keep-within-monthly 1y && restic prune --max-unused 50% --max-repack-size 2G && restic check" ]
       }
@@ -152,14 +152,14 @@ EOH
     constraint {
       attribute = "${attr.unique.hostname}"
       operator = "="
-      value = "abricot"
+      value = "concombre"
     }
 
     task "main" {
       driver = "docker"
 
       config {
-        image = "restic/restic:0.16.4"
+        image = "restic/restic:0.16.0"
         entrypoint = [ "/bin/sh", "-c" ]
         args = [ "restic backup /cryptpad && restic forget --group-by paths --keep-within 1m1d --keep-within-weekly 3m --keep-within-monthly 1y && restic prune --max-unused 50% --max-repack-size 2G && restic check" ]
         volumes = [

cluster/prod/app/bagage/deploy/bagage.hcl

@@ -1,5 +1,5 @@
 job "bagage" {
-  datacenters = ["corrin", "neptune", "scorpio"]
+  datacenters = ["scorpio", "neptune"]
   type = "service"
   priority = 90
 

cluster/prod/app/cms/deploy/cms.hcl

@@ -1,5 +1,5 @@
 job "cms" {
-  datacenters = ["corrin", "neptune", "scorpio"]
+  datacenters = ["neptune", "scorpio"]
   type = "service"
 
   priority = 100

cluster/prod/app/core/deploy/bottin.hcl

@@ -1,5 +1,5 @@
 job "core-bottin" {
-  datacenters = ["corrin", "neptune", "scorpio", "bespin"]
+  datacenters = ["neptune", "scorpio"]
   type = "system"
   priority = 90
 

cluster/prod/app/core/deploy/d53.hcl

@@ -1,5 +1,5 @@
 job "core-d53" {
-  datacenters = ["neptune", "scorpio", "bespin", "corrin"]
+  datacenters = ["neptune", "scorpio", "bespin"]
   type = "service"
   priority = 90
 

cluster/prod/app/core/deploy/diplonat.hcl

@@ -1,5 +1,5 @@
 job "core-diplonat" {
-  datacenters = ["neptune", "scorpio", "bespin", "corrin"]
+  datacenters = ["neptune", "scorpio", "bespin"]
   type = "system"
   priority = 90
 

cluster/prod/app/core/deploy/tricot.hcl

@@ -3,7 +3,7 @@ job "core-tricot" {
   # on pourra mettre bespin quand on aura migré gitea de la vm vers le cluster
   # en attendant, les deux  ne sont pas capables de partager les certificats SSL
   # donc on laisse la VM gitea gérer les certifs et prendre tout le trafic http(s)
-  datacenters = ["corrin", "neptune", "scorpio"]
+  datacenters = ["neptune", "scorpio"]
   type = "system"
   priority = 90
 
@@ -28,16 +28,13 @@ job "core-tricot" {
       driver = "docker"
 
       config {
-        image = "armael/tricot:40g7jpp915jkfszlczfh1yw2x6syjkxs-redir-headers"
+        image = "superboum/amd64_tricot:54"
         network_mode = "host"
         readonly_rootfs = true
         ports = [ "http_port", "https_port" ]
         volumes = [
           "secrets:/etc/tricot",
         ]
-        ulimit {
-          nofile = "65535:65535"
-        }
       }
 
       resources {

cluster/prod/app/core/secrets.toml

@@ -3,7 +3,3 @@ type = 'user'
 description = 'LDAP base DN for everything'
 example = 'dc=example,dc=com'
 
-[secrets."d53/gandi_api_key"]
-type = 'user'
-description = 'Gandi API key'
-

cluster/prod/app/coturn/deploy/coturn.hcl

@@ -1,5 +1,5 @@
 job "coturn" {
-  datacenters = ["corrin", "neptune", "scorpio"]
+  datacenters = ["neptune", "scorpio"]
   type = "service"
 
   priority = 100
@@ -34,13 +34,15 @@ job "coturn" {
         ports = [ "prometheus", "turn_ctrl", "turn_data0", "turn_data1", "turn_data2",
                   "turn_data3", "turn_data4", "turn_data5", "turn_data6", "turn_data7",
                   "turn_data8", "turn_data9" ]
-        entrypoint = ["/local/docker-entrypoint.sh"]
         network_mode = "host"
+        volumes = [
+          "secrets/docker-entrypoint.sh:/usr/local/bin/docker-entrypoint.sh",
+        ]
       }
 
       template {
         data = file("../config/docker-entrypoint.sh")
-        destination = "local/docker-entrypoint.sh"
+        destination = "secrets/docker-entrypoint.sh"
         perms = 555
       }
 

cluster/prod/app/cryptpad/build/README.md

@@ -1,52 +1,29 @@
-# CryptPad for NixOS with Deuxfleurs flavour
+## Build
 
-## Building
+Cryptpad being not NixOS native, an upgrade must be done in 4 steps:
+  1. Bump the cryptpad version in `common.nix`
+  2. Rebuild the Nix lock files for the dependencies 
+  3. Build the package for Nix
+  4. Create a container from the Nix package
 
-The `default.nix` file follows the nixpkgs `callPackage` convention for fetching dependencies, so you need to either:
+To bump the nix version, set the desired tag in `common.nix` in the `cryptpadVersion` entry.
+Set the corresponding commit in the `cryptadCommit` field, its goal would be to detect unwanted update of the tag.
 
-- Run `nix-build --expr '{ ... }@args: (import <nixpkgs> {}).callPackage ./default.nix args'`
+To rebuild the lock files (they are stored in the `nix.lock` folder):
-- Do the `callPackage from a higher-level directory importing your package`
 
-### Docker
+```
-
+nix-shell --run "update_lock"
-The `docker.nix` derives into a Docker image you can load simply by running:
-
-```shell
-docker load -i $(nix-build docker.nix)
 ```
 
-You can then test the built Docker image using the provided `docker-compose.yml` and `config.js` files, which are
+To build cryptpad:
-configured to render the instance accessible at `http://localhost:3000` with data stored into the `_data` folder.
 
-
+```
-### Deuxfleurs flavour
+nix-build
-The `deuxfleurs.nix` file derives into two derivations: The CryptPad derivation itself and a Docker image,
-which can be choose by passing the `-A [name]` flags to `nix-build`
-
-For example, to build and load the Deuxfleurs-flavoured CryptPad Docker image, you run:
-
-```shell
-docker load -i $(nix-build deuxfleurs.nix -A docker)
 ```
 
-## OnlyOffice integration
+Create the container:
-Apart for `deuxfleurs.nix`, both `default.nix` and `docker.nix` files build CryptPad with a copy of OnlyOffice pre-built and
-used by CryptPad, which can result to large Docker image (~2.6GiB)
 
-This behaviour is configurable by passing the `--arg withOnlyOffice false` flag to `nix-build` when building them.
-
-## Updating the Deuxfleurs pinned nixpkgs
-The pinned sources files are generated with the [npins](https://github.com/andir/npins) tool.
-
-To update the pinned nixpkgs, you simply run the following command:
-
-```shell
-npins update
 ```
-
+docker load < $(nix-build docker.nix)
-To modify the pinned nixpkgs, remove it and re-add it using the new target, for exemple for `nixos-unstable`:
+docker push superboum/cryptpad:???
-
-```shell
-npins remove nixpkgs
-npins add --name nixpkgs channel nixos-unstable
 ```

cluster/prod/app/cryptpad/build/common.nix

@@ -0,0 +1,22 @@
+rec {
+  cryptpadVersion = "4.14.1+2";
+  cryptpadCommit = "18c371bb5bda068a5d962dd7c4f0726320eea5e9";
+
+  pkgsSrc = fetchTarball {
+    # Latest commit on https://github.com/NixOS/nixpkgs/tree/nixos-21.11
+    # As of 2022-04-15
+    url ="https://github.com/NixOS/nixpkgs/archive/2f06b87f64bc06229e05045853e0876666e1b023.tar.gz";
+    sha256 = "sha256:1d7zg96xw4qsqh7c89pgha9wkq3rbi9as3k3d88jlxy2z0ns0cy2";
+  };
+  cryptpadSrc = builtins.fetchGit {
+    url = "https://github.com/superboum/cryptpad";
+    ref = "refs/tags/${cryptpadVersion}";
+    rev = cryptpadCommit;
+  };
+  bower2nixSrc = builtins.fetchGit {
+    url = "https://github.com/superboum/bower2nix";
+    ref = "new";
+    rev = "618ab3e206325c63fe4526ae842a1f6c792b0e27";
+  };
+  nodejs = "nodejs-slim-16_x";
+}

cluster/prod/app/cryptpad/build/default.nix

@@ -1,132 +1,77 @@
-{ lib
+let
-, stdenvNoCC
+  common = import ./common.nix;
+  pkgs = import common.pkgsSrc {};
+  nodejs = pkgs.${common.nodejs};
 
-, buildNpmPackage
+  bower = (pkgs.buildBowerComponents {
-, fetchFromGitHub
+    name = "cryptpad-${common.cryptpadVersion}-bower";
-, fetchzip
+    generated = ./nix.lock/bower.nix;
+    src = common.cryptpadSrc;
+  }).overrideAttrs (old: {
+    bowerPackages = old.bowerPackages.override (old_: {
+      # add missing dependencies:
+      # Those dependencies are EOL and they are not installed by buildBowerComponents,
+      # but they are required, otherwise the resolver crashes.
+      # * add the second jquery ~2.1.0 entry
+      # * add the second bootstrap ~3.1.1 entry
+      paths = old_.paths ++ [
+        (pkgs.fetchbower "jquery" "2.1.0" "~2.1.0" "02kwvz93vzpv10qnp7s0dz3al0jh77awwrizb6wadsvgifxssnlr")
+        (pkgs.fetchbower "bootstrap" "3.1.1" "~3.1.1" "06bhjwa8p7mzbpr3jkgydd804z1nwrkdql66h7jkfml99psv9811")
+      ];
+    });
+  });
 
-, nodejs
+  npm = import ./nix.lock/npm.nix {
-
+    inherit pkgs;
-, withOnlyOffice ? true
-}: let
-  onlyOfficeVersions = {
-    v1 = {
-      rev = "4f370bebe96e3a0d4054df87412ee5b2c6ed8aaa";
-      hash = "sha256-TE/99qOx4wT2s0op9wi+SHwqTPYq/H+a9Uus9Zj4iSY=";
-    };
-    v2b = {
-      rev = "d9da72fda95daf93b90ffa345757c47eb5b919dd";
-      hash = "sha256-SiRDRc2vnLwCVnvtk+C8PKw7IeuSzHBaJmZHogRe3hQ=";
-    };
-    v4 = {
-      rev =  "6ebc6938b6841440ffad2efc1e23f1dc1ceda964";
-      hash = "sha256-eto1+8Tk/s3kbUCpbUh8qCS8EOq700FYG1/KiHyynaA=";
-    };
-    v5 = {
-      rev = "88a356f08ded2f0f4620bda66951caf1d7f02c21";
-      hash = "sha256-8j1rlAyHlKx6oAs2pIhjPKcGhJFj6ZzahOcgenyeOCc=";
-    };
-    v6 = {
-      rev = "abd8a309f6dd37289f950cd8cea40df4492d8a15";
-      hash = "sha256-BZdExj2q/bqUD3k9uluOot2dlrWKA+vpad49EdgXKww=";
-    };
-    v7 = {
-      rev = "e1267803ea749cd93e9d5f81438011ea620d04af";
-      hash = "sha256-iIds0GnCHAyeIEdSD4aCCgDtnnwARh3NE470CywseS0=";
-    };
-  };
-  mkOnlyOffice = {
-    pname, version
-  }: stdenvNoCC.mkDerivation (final: {
-    pname = "${pname}-onlyoffice";
-    inherit version;
-
-    x2t = let
-      version = "v7.3+1";
-    in fetchzip {
-      url = "https://github.com/cryptpad/onlyoffice-x2t-wasm/releases/download/${version}/x2t.zip";
-      hash = "sha256-d5raecsTOflo0UpjSEZW5lker4+wdkTb6IyHNq5iBg8=";
-      stripRoot = false;
   };
    
-    srcs = lib.mapAttrsToList (version: { rev, hash ? lib.fakeHash }: fetchFromGitHub {
+in
-      name = "${final.pname}-${version}-source";
+  pkgs.stdenv.mkDerivation {
-      owner = "cryptpad";
+    name = "cryptpad-${common.cryptpadVersion}";
-      repo = "onlyoffice-builds";
+    src = common.cryptpadSrc;
-      inherit rev hash;
-    }) onlyOfficeVersions;
 
-    dontBuild = true;
+    buildPhase = ''
+      cp -r ${npm.nodeDependencies}/lib/node_modules node_modules
+      chmod +w -R node_modules
 
-    sourceRoot = ".";
+      # clear executable files inside the node_modules folder to reduce dependencies
+      # and attack surface
+      find node_modules -type f ! -path 'node_modules/gar/*' -executable -print | tee >(xargs -n 20 rm)
+
+      # Remove only office that IS BIG
+      # COMMENTED as it is not as easy as planned.
+      # rm -rf www/common/onlyoffice
+    '';
 
     installPhase = ''
-      mkdir -p $out
+      mkdir -p $out/{bin,opt}
-      ${lib.concatLines (map
+
-        (version: "cp -Tr ${final.pname}-${version}-source $out/${version}")
+      out_cryptpad=$out/opt/
-        (builtins.attrNames onlyOfficeVersions)
+
-      )}
+      # copy the source code
-      cp -Tr $x2t $out/x2t
+      cp -r .bowerrc bower.json package.json package-lock.json customize.dist lib server.js www $out_cryptpad
+
+      # mount node_modules
+      cp -r node_modules $out_cryptpad/node_modules
+
+      # patch
+      substituteInPlace $out_cryptpad/lib/workers/index.js --replace "lib/workers/db-worker" "$out_cryptpad/lib/workers/db-worker"
+
+      # mount bower, based on the .bowerrc file at the git repo root
+      cp -r ${bower}/bower_components $out_cryptpad/www/
+
+      # cryptpad is bugged with absolute path, this is a workaround to use absolute path as relative path
+      ln -s / $out_cryptpad/root
+
+      # start script, cryptpad is lost if its working directory is not its source directory
+      cat > $out/bin/cryptpad <<EOF
+      #!${pkgs.stdenv.shell}
+      cd $out_cryptpad
+      exec ${nodejs}/bin/node server.js
+      EOF
+
+      chmod +x $out/bin/cryptpad
     '';
-  });
-in buildNpmPackage rec {
-  pname = "cryptpad";
-  version = "2024.9.0";
 
-  src = fetchFromGitHub {
-    owner = "cryptpad";
-    repo = "cryptpad";
-    rev = version;
-    hash = "sha256-OUtWaDVLRUbKS0apwY0aNq4MalGFv+fH9VA7LvWWYRs=";
-  };
-
-  npmDepsHash = "sha256-pK0b7q1kJja9l8ANwudbfo3jpldwuO56kuulS8X9A5s=";
-
-  inherit nodejs;
-
-  onlyOffice = lib.optional withOnlyOffice (mkOnlyOffice {
-    inherit pname version;
-  });
-
-  makeCacheWritable = true;
     dontFixup = true;
-
+  }
-  preBuild = ''
-    npm run install:components
-  '' + lib.optionalString withOnlyOffice ''
-    ln -s $onlyOffice www/common/onlyoffice/dist
-  '';
-
-  postBuild = ''
-    rm -rf customize
-  '';
-
-  installPhase = ''
-    runHook preInstall
-
-    mkdir -p $out
-    cp -R . $out/
-
-    substituteInPlace $out/lib/workers/index.js \
-      --replace-warn "lib/workers/db-worker" "$out/lib/workers/db-worker"
-
-    makeWrapper ${lib.getExe nodejs} $out/bin/cryptpad-server \
-      --chdir $out \
-      --add-flags server.js
-
-    runHook postInstall
-  '';
-
-  passthru = {
-    inherit onlyOffice;
-  };
-
-  meta = {
-    description = "Collaborative office suite, end-to-end encrypted and open-source.";
-    homepage = "https://cryptpad.org";
-    changelog = "https://github.com/cryptpad/cryptpad/releases/tag/${version}";
-    license = lib.licenses.agpl3Plus;
-    platforms = lib.platforms.all;
-    mainProgram = "cryptpad-server";
-  };
-}

cluster/prod/app/cryptpad/build/deuxfleurs.nix

@@ -1,14 +0,0 @@
-{ name ? "deuxfleurs/cryptpad"
-, tag ? "nix-latest"
-}: let
-  sources = import ./npins;
-  pkgs = import sources.nixpkgs {};
-in rec {
-  cryptpad = pkgs.callPackage ./default.nix {};
-  docker = import ./docker.nix {
-    inherit pkgs;
-    inherit name tag;
-    inherit cryptpad;
-    withOnlyOffice = true;
-  };
-}

cluster/prod/app/cryptpad/build/docker.nix

@@ -1,27 +1,11 @@
-{ pkgs ? import <nixpkgs> {}
+let
-
+  common = import ./common.nix;
-, name ? "cryptpad"
+  pkgs = import common.pkgsSrc {};
-, tag ? "nix-latest"
+  app = import ./default.nix;
-
+in
-, withOnlyOffice ? true
+  pkgs.dockerTools.buildLayeredImage {
-
+    name = "superboum/cryptpad";
-, cryptpad ? pkgs.callPackage ./default.nix { inherit withOnlyOffice; }
-}: let
-  cryptpad' = cryptpad.overrideAttrs {
-    postInstall = ''
-      ln -sf /cryptpad/customize $out/customize
-    '';
-  };
-in pkgs.dockerTools.buildImage {
-  inherit name tag;
-
     config = {
-    Cmd = [
+      Cmd = [ "${app}/bin/cryptpad" ];
-      (pkgs.lib.getExe cryptpad')
-    ];
-
-    Volumes = {
-      "/cryptpad/customize" = {};
     };
-  };
+ }
-}

cluster/prod/app/cryptpad/build/nix.lock/bower.json

@@ -0,0 +1,57 @@
+{
+  "name": "cryptpad",
+  "version": "0.1.0",
+  "authors": [
+    "Caleb James DeLisle <cjd@cjdns.fr>"
+  ],
+  "description": "realtime collaborative visual editor with zero knowlege server",
+  "main": "www/index.html",
+  "moduleType": [
+    "node"
+  ],
+  "license": "AGPLv3",
+  "ignore": [
+    "**/.*",
+    "node_modules",
+    "bower_components",
+    "test",
+    "tests"
+  ],
+  "dependencies": {
+    "jquery": "3.6.0",
+    "tweetnacl": "0.12.2",
+    "components-font-awesome": "^4.6.3",
+    "ckeditor": "4.14.0",
+    "codemirror": "^5.19.0",
+    "requirejs": "2.3.5",
+    "marked": "1.1.0",
+    "rangy": "rangy-release#~1.3.0",
+    "json.sortify": "~2.1.0",
+    "hyperjson": "~1.4.0",
+    "chainpad-crypto": "^0.2.0",
+    "chainpad-listmap": "^1.0.0",
+    "chainpad": "^5.2.0",
+    "file-saver": "1.3.1",
+    "alertifyjs": "1.0.11",
+    "scrypt-async": "1.2.0",
+    "require-css": "0.1.10",
+    "bootstrap": "^v4.0.0",
+    "diff-dom": "2.1.1",
+    "nthen": "0.1.7",
+    "open-sans-fontface": "^1.4.2",
+    "bootstrap-tokenfield": "0.12.1",
+    "localforage": "^1.5.2",
+    "html2canvas": "^0.4.1",
+    "croppie": "^2.5.0",
+    "sortablejs": "^1.6.0",
+    "saferphore": "^0.0.1",
+    "jszip": "3.7.1",
+    "requirejs-plugins": "^1.0.3",
+    "dragula.js": "3.7.2",
+    "MathJax": "3.0.5"
+  },
+  "resolutions": {
+    "bootstrap": "^v4.0.0",
+    "jquery": "3.6.0"
+  }
+}

cluster/prod/app/cryptpad/build/nix.lock/bower.nix

@@ -0,0 +1,37 @@
+# Generated by bower2nix v3.3.0 (https://github.com/rvl/bower2nix)
+{ fetchbower, buildEnv }:
+buildEnv { name = "bower-env"; ignoreCollisions = true; paths = [
+  (fetchbower "jquery" "3.6.0" "3.6.0" "1wx5n605x6ga483hba43gxjncgzk8yvxc3h0jlwgpjd0h54y9v6l")
+  (fetchbower "tweetnacl" "0.12.2" "0.12.2" "1lfzbfrdaly3zyzbcp1p53yhxlrx56k8x04q924kg7l52gblm65g")
+  (fetchbower "components-font-awesome" "4.7.0" "^4.6.3" "1w27im6ayjrbgjqa0i49ml5d3wy4ld40h9b29hz9myv77bpx4lg1")
+  (fetchbower "ckeditor" "4.14.0" "4.14.0" "0lw9q0k8c0jlxvf35vrccab9c3c8rgpc6x66czj9si8yy2lyliyp")
+  (fetchbower "codemirror" "5.65.3" "^5.19.0" "0z6pd0q0cy0k0dkplx4f3cmmjqbiixv6wqlzbz5j8dnsxr5hhgzh")
+  (fetchbower "requirejs" "2.3.5" "2.3.5" "05lyvgz914h2w08r24rk0vkk3yxmqrvlg7j3i5av9ffkg9lpzsli")
+  (fetchbower "marked" "1.1.0" "1.1.0" "1sdgqw9iki9c1pfm4c5h6c956mchbip2jywjrcmrlb75k53flsjz")
+  (fetchbower "rangy" "rangy-release#1.3.0" "rangy-release#~1.3.0" "13x3wci003p8jyv2ncir0k23bxckx99b3555r0zvgmlwycg7w0zv")
+  (fetchbower "json.sortify" "2.1.0" "~2.1.0" "1rz9xz0gnm4ak31n10vhslqsw8fw493gjylwj8xsy3bxqq1ygpnh")
+  (fetchbower "hyperjson" "1.4.0" "~1.4.0" "1n68ls3x4lyhg1yy8i4q3xkgh5xqpyakf45sny4x91mkr68x4bd9")
+  (fetchbower "chainpad-crypto" "0.2.7" "^0.2.0" "16j0gjj1v8dckqpsg38229qs4dammz7vx8ywsik6f0brzf4py65a")
+  (fetchbower "chainpad-listmap" "1.0.1" "^1.0.0" "0s2v27hhraifb1yjw5fka4a922zmgsdngsaq1nfd48gbs8gd2rrd")
+  (fetchbower "chainpad" "5.2.4" "^5.2.0" "1f4nap0r8w50qpmjdfhhjhpz5xcl0n4zaxxnav1qaxi5j6dyg8h6")
+  (fetchbower "file-saver" "1.3.1" "1.3.1" "065nzkvdiicxnw06z1sjz1sbp9nyis8z839hv6ng1fk25dc5kvkg")
+  (fetchbower "alertifyjs" "1.0.11" "1.0.11" "0v7323bzq90k35shm3h6azj4wd9la3kbi1va1pw4qyvndkwma69l")
+  (fetchbower "scrypt-async" "1.2.0" "1.2.0" "0d076ax708p9b8hcmk4f82j925nlnm0hmp0ni45ql37g7iirfpyv")
+  (fetchbower "require-css" "0.1.10" "0.1.10" "106gz9i76v71q9zx2pnqkkj342m630lvssnw54023a0ljc0gqcwq")
+  (fetchbower "bootstrap" "4.6.1" "^v4.0.0" "0g8zy1fl396lawgjvfhlpcl38zxsgybhnzi8b6b4m9nccvmpxv83")
+  (fetchbower "diff-dom" "2.1.1" "2.1.1" "0bp8c80g11hhlkvl3lhrqc39jvqiiyqvrgk1nsn35ps01ava07z9")
+  (fetchbower "nthen" "0.1.7" "0.1.7" "03yap5ildigaw4rwxmxs37pcwhq415iham8w39zd56ka98gpfxa5")
+  (fetchbower "open-sans-fontface" "1.4.2" "^1.4.2" "0ksav1fcq640fmdz49ra4prwsrrfj35y2p4shx1jh1j7zxd044nf")
+  (fetchbower "bootstrap-tokenfield" "0.12.1" "0.12.1" "1dh791s6ih8bf9ihck9n39h68c273jb3lg4mqk94bvqraz45fvwx")
+  (fetchbower "localforage" "1.10.0" "^1.5.2" "019rh006v2w5x63mgk78qhw59kf8czbkwdvfngmac8fs6gz88lc8")
+  (fetchbower "html2canvas" "0.4.1" "^0.4.1" "0yg7y90nav068q0i5afc2c221zkddpf28hi0hwc46cawx4180c69")
+  (fetchbower "croppie" "2.6.5" "^2.5.0" "1j1v5620zi13ad42r358i4ay891abwn6nz357484kgq2bgjj6ccx")
+  (fetchbower "sortablejs" "1.15.0" "^1.6.0" "1wk1097jrxbp2c4ghcppqd3h2gnq5b01qkf9426mc08zgszlvjr7")
+  (fetchbower "saferphore" "0.0.1" "^0.0.1" "1wfr9wpbm3lswmvy2p0247ydb108h4qh5s286py89k871qh6jwdi")
+  (fetchbower "jszip" "3.7.1" "3.7.1" "0f14bak7vylxizi6pvj3znjc2cx922avbv7lslklvic85x0318lf")
+  (fetchbower "requirejs-plugins" "1.0.3" "^1.0.3" "00s3sdz1ykygx5shldwhhhybwgw7c99vkqd94i5i5x0gl97ifxf5")
+  (fetchbower "dragula.js" "3.7.2" "3.7.2" "0dbkmrl8bcxiplprmmp9fj96ri5nahb2ql8cc7zwawncv0drvlh0")
+  (fetchbower "MathJax" "3.0.5" "3.0.5" "087a9av15qj43m8pr3b9g59ncmydhmg40m6dfzsac62ykianh2a0")
+  (fetchbower "chainpad-netflux" "1.0.0" "^1.0.0" "08rpc73x1vyvd6zkb7w0m1smzjhq3b7cwb30nlmg93x873zjlsl6")
+  (fetchbower "netflux-websocket" "1.0.0" "^1.0.0" "10hgc5ra3ll7qc2r8aal6p03gx6dgz06l2b54lh995pvf901wzi6")
+]; }

cluster/prod/app/cryptpad/build/nix.lock/node-env.nix

@@ -0,0 +1,588 @@
+# This file originates from node2nix
+
+{lib, stdenv, nodejs, python2, pkgs, libtool, runCommand, writeTextFile, writeShellScript}:
+
+let
+  # Workaround to cope with utillinux in Nixpkgs 20.09 and util-linux in Nixpkgs master
+  utillinux = if pkgs ? utillinux then pkgs.utillinux else pkgs.util-linux;
+
+  python = if nodejs ? python then nodejs.python else python2;
+
+  # Create a tar wrapper that filters all the 'Ignoring unknown extended header keyword' noise
+  tarWrapper = runCommand "tarWrapper" {} ''
+    mkdir -p $out/bin
+
+    cat > $out/bin/tar <<EOF
+    #! ${stdenv.shell} -e
+    $(type -p tar) "\$@" --warning=no-unknown-keyword --delay-directory-restore
+    EOF
+
+    chmod +x $out/bin/tar
+  '';
+
+  # Function that generates a TGZ file from a NPM project
+  buildNodeSourceDist =
+    { name, version, src, ... }:
+
+    stdenv.mkDerivation {
+      name = "node-tarball-${name}-${version}";
+      inherit src;
+      buildInputs = [ nodejs ];
+      buildPhase = ''
+        export HOME=$TMPDIR
+        tgzFile=$(npm pack | tail -n 1) # Hooks to the pack command will add output (https://docs.npmjs.com/misc/scripts)
+      '';
+      installPhase = ''
+        mkdir -p $out/tarballs
+        mv $tgzFile $out/tarballs
+        mkdir -p $out/nix-support
+        echo "file source-dist $out/tarballs/$tgzFile" >> $out/nix-support/hydra-build-products
+      '';
+    };
+
+  # Common shell logic
+  installPackage = writeShellScript "install-package" ''
+    installPackage() {
+      local packageName=$1 src=$2
+
+      local strippedName
+
+      local DIR=$PWD
+      cd $TMPDIR
+
+      unpackFile $src
+
+      # Make the base dir in which the target dependency resides first
+      mkdir -p "$(dirname "$DIR/$packageName")"
+
+      if [ -f "$src" ]
+      then
+          # Figure out what directory has been unpacked
+          packageDir="$(find . -maxdepth 1 -type d | tail -1)"
+
+          # Restore write permissions to make building work
+          find "$packageDir" -type d -exec chmod u+x {} \;
+          chmod -R u+w "$packageDir"
+
+          # Move the extracted tarball into the output folder
+          mv "$packageDir" "$DIR/$packageName"
+      elif [ -d "$src" ]
+      then
+          # Get a stripped name (without hash) of the source directory.
+          # On old nixpkgs it's already set internally.
+          if [ -z "$strippedName" ]
+          then
+              strippedName="$(stripHash $src)"
+          fi
+
+          # Restore write permissions to make building work
+          chmod -R u+w "$strippedName"
+
+          # Move the extracted directory into the output folder
+          mv "$strippedName" "$DIR/$packageName"
+      fi
+
+      # Change to the package directory to install dependencies
+      cd "$DIR/$packageName"
+    }
+  '';
+
+  # Bundle the dependencies of the package
+  #
+  # Only include dependencies if they don't exist. They may also be bundled in the package.
+  includeDependencies = {dependencies}:
+    lib.optionalString (dependencies != []) (
+      ''
+        mkdir -p node_modules
+        cd node_modules
+      ''
+      + (lib.concatMapStrings (dependency:
+        ''
+          if [ ! -e "${dependency.name}" ]; then
+              ${composePackage dependency}
+          fi
+        ''
+      ) dependencies)
+      + ''
+        cd ..
+      ''
+    );
+
+  # Recursively composes the dependencies of a package
+  composePackage = { name, packageName, src, dependencies ? [], ... }@args:
+    builtins.addErrorContext "while evaluating node package '${packageName}'" ''
+      installPackage "${packageName}" "${src}"
+      ${includeDependencies { inherit dependencies; }}
+      cd ..
+      ${lib.optionalString (builtins.substring 0 1 packageName == "@") "cd .."}
+    '';
+
+  pinpointDependencies = {dependencies, production}:
+    let
+      pinpointDependenciesFromPackageJSON = writeTextFile {
+        name = "pinpointDependencies.js";
+        text = ''
+          var fs = require('fs');
+          var path = require('path');
+
+          function resolveDependencyVersion(location, name) {
+              if(location == process.env['NIX_STORE']) {
+                  return null;
+              } else {
+                  var dependencyPackageJSON = path.join(location, "node_modules", name, "package.json");
+
+                  if(fs.existsSync(dependencyPackageJSON)) {
+                      var dependencyPackageObj = JSON.parse(fs.readFileSync(dependencyPackageJSON));
+
+                      if(dependencyPackageObj.name == name) {
+                          return dependencyPackageObj.version;
+                      }
+                  } else {
+                      return resolveDependencyVersion(path.resolve(location, ".."), name);
+                  }
+              }
+          }
+
+          function replaceDependencies(dependencies) {
+              if(typeof dependencies == "object" && dependencies !== null) {
+                  for(var dependency in dependencies) {
+                      var resolvedVersion = resolveDependencyVersion(process.cwd(), dependency);
+
+                      if(resolvedVersion === null) {
+                          process.stderr.write("WARNING: cannot pinpoint dependency: "+dependency+", context: "+process.cwd()+"\n");
+                      } else {
+                          dependencies[dependency] = resolvedVersion;
+                      }
+                  }
+              }
+          }
+
+          /* Read the package.json configuration */
+          var packageObj = JSON.parse(fs.readFileSync('./package.json'));
+
+          /* Pinpoint all dependencies */
+          replaceDependencies(packageObj.dependencies);
+          if(process.argv[2] == "development") {
+              replaceDependencies(packageObj.devDependencies);
+          }
+          replaceDependencies(packageObj.optionalDependencies);
+
+          /* Write the fixed package.json file */
+          fs.writeFileSync("package.json", JSON.stringify(packageObj, null, 2));
+        '';
+      };
+    in
+    ''
+      node ${pinpointDependenciesFromPackageJSON} ${if production then "production" else "development"}
+
+      ${lib.optionalString (dependencies != [])
+        ''
+          if [ -d node_modules ]
+          then
+              cd node_modules
+              ${lib.concatMapStrings (dependency: pinpointDependenciesOfPackage dependency) dependencies}
+              cd ..
+          fi
+        ''}
+    '';
+
+  # Recursively traverses all dependencies of a package and pinpoints all
+  # dependencies in the package.json file to the versions that are actually
+  # being used.
+
+  pinpointDependenciesOfPackage = { packageName, dependencies ? [], production ? true, ... }@args:
+    ''
+      if [ -d "${packageName}" ]
+      then
+          cd "${packageName}"
+          ${pinpointDependencies { inherit dependencies production; }}
+          cd ..
+          ${lib.optionalString (builtins.substring 0 1 packageName == "@") "cd .."}
+      fi
+    '';
+
+  # Extract the Node.js source code which is used to compile packages with
+  # native bindings
+  nodeSources = runCommand "node-sources" {} ''
+    tar --no-same-owner --no-same-permissions -xf ${nodejs.src}
+    mv node-* $out
+  '';
+
+  # Script that adds _integrity fields to all package.json files to prevent NPM from consulting the cache (that is empty)
+  addIntegrityFieldsScript = writeTextFile {
+    name = "addintegrityfields.js";
+    text = ''
+      var fs = require('fs');
+      var path = require('path');
+
+      function augmentDependencies(baseDir, dependencies) {
+          for(var dependencyName in dependencies) {
+              var dependency = dependencies[dependencyName];
+
+              // Open package.json and augment metadata fields
+              var packageJSONDir = path.join(baseDir, "node_modules", dependencyName);
+              var packageJSONPath = path.join(packageJSONDir, "package.json");
+
+              if(fs.existsSync(packageJSONPath)) { // Only augment packages that exist. Sometimes we may have production installs in which development dependencies can be ignored
+                  console.log("Adding metadata fields to: "+packageJSONPath);
+                  var packageObj = JSON.parse(fs.readFileSync(packageJSONPath));
+
+                  if(dependency.integrity) {
+                      packageObj["_integrity"] = dependency.integrity;
+                  } else {
+                      packageObj["_integrity"] = "sha1-000000000000000000000000000="; // When no _integrity string has been provided (e.g. by Git dependencies), add a dummy one. It does not seem to harm and it bypasses downloads.
+                  }
+
+                  if(dependency.resolved) {
+                      packageObj["_resolved"] = dependency.resolved; // Adopt the resolved property if one has been provided
+                  } else {
+                      packageObj["_resolved"] = dependency.version; // Set the resolved version to the version identifier. This prevents NPM from cloning Git repositories.
+                  }
+
+                  if(dependency.from !== undefined) { // Adopt from property if one has been provided
+                      packageObj["_from"] = dependency.from;
+                  }
+
+                  fs.writeFileSync(packageJSONPath, JSON.stringify(packageObj, null, 2));
+              }
+
+              // Augment transitive dependencies
+              if(dependency.dependencies !== undefined) {
+                  augmentDependencies(packageJSONDir, dependency.dependencies);
+              }
+          }
+      }
+
+      if(fs.existsSync("./package-lock.json")) {
+          var packageLock = JSON.parse(fs.readFileSync("./package-lock.json"));
+
+          if(![1, 2].includes(packageLock.lockfileVersion)) {
+             process.stderr.write("Sorry, I only understand lock file versions 1 and 2!\n");
+             process.exit(1);
+          }
+
+          if(packageLock.dependencies !== undefined) {
+              augmentDependencies(".", packageLock.dependencies);
+          }
+      }
+    '';
+  };
+
+  # Reconstructs a package-lock file from the node_modules/ folder structure and package.json files with dummy sha1 hashes
+  reconstructPackageLock = writeTextFile {
+    name = "addintegrityfields.js";
+    text = ''
+      var fs = require('fs');
+      var path = require('path');
+
+      var packageObj = JSON.parse(fs.readFileSync("package.json"));
+
+      var lockObj = {
+          name: packageObj.name,
+          version: packageObj.version,
+          lockfileVersion: 1,
+          requires: true,
+          dependencies: {}
+      };
+
+      function augmentPackageJSON(filePath, dependencies) {
+          var packageJSON = path.join(filePath, "package.json");
+          if(fs.existsSync(packageJSON)) {
+              var packageObj = JSON.parse(fs.readFileSync(packageJSON));
+              dependencies[packageObj.name] = {
+                  version: packageObj.version,
+                  integrity: "sha1-000000000000000000000000000=",
+                  dependencies: {}
+              };
+              processDependencies(path.join(filePath, "node_modules"), dependencies[packageObj.name].dependencies);
+          }
+      }
+
+      function processDependencies(dir, dependencies) {
+          if(fs.existsSync(dir)) {
+              var files = fs.readdirSync(dir);
+
+              files.forEach(function(entry) {
+                  var filePath = path.join(dir, entry);
+                  var stats = fs.statSync(filePath);
+
+                  if(stats.isDirectory()) {
+                      if(entry.substr(0, 1) == "@") {
+                          // When we encounter a namespace folder, augment all packages belonging to the scope
+                          var pkgFiles = fs.readdirSync(filePath);
+
+                          pkgFiles.forEach(function(entry) {
+                              if(stats.isDirectory()) {
+                                  var pkgFilePath = path.join(filePath, entry);
+                                  augmentPackageJSON(pkgFilePath, dependencies);
+                              }
+                          });
+                      } else {
+                          augmentPackageJSON(filePath, dependencies);
+                      }
+                  }
+              });
+          }
+      }
+
+      processDependencies("node_modules", lockObj.dependencies);
+
+      fs.writeFileSync("package-lock.json", JSON.stringify(lockObj, null, 2));
+    '';
+  };
+
+  prepareAndInvokeNPM = {packageName, bypassCache, reconstructLock, npmFlags, production}:
+    let
+      forceOfflineFlag = if bypassCache then "--offline" else "--registry http://www.example.com";
+    in
+    ''
+        # Pinpoint the versions of all dependencies to the ones that are actually being used
+        echo "pinpointing versions of dependencies..."
+        source $pinpointDependenciesScriptPath
+
+        # Patch the shebangs of the bundled modules to prevent them from
+        # calling executables outside the Nix store as much as possible
+        patchShebangs .
+
+        # Deploy the Node.js package by running npm install. Since the
+        # dependencies have been provided already by ourselves, it should not
+        # attempt to install them again, which is good, because we want to make
+        # it Nix's responsibility. If it needs to install any dependencies
+        # anyway (e.g. because the dependency parameters are
+        # incomplete/incorrect), it fails.
+        #
+        # The other responsibilities of NPM are kept -- version checks, build
+        # steps, postprocessing etc.
+
+        export HOME=$TMPDIR
+        cd "${packageName}"
+        runHook preRebuild
+
+        ${lib.optionalString bypassCache ''
+          ${lib.optionalString reconstructLock ''
+            if [ -f package-lock.json ]
+            then
+                echo "WARNING: Reconstruct lock option enabled, but a lock file already exists!"
+                echo "This will most likely result in version mismatches! We will remove the lock file and regenerate it!"
+                rm package-lock.json
+            else
+                echo "No package-lock.json file found, reconstructing..."
+            fi
+
+            node ${reconstructPackageLock}
+          ''}
+
+          node ${addIntegrityFieldsScript}
+        ''}
+
+        npm ${forceOfflineFlag} --nodedir=${nodeSources} ${npmFlags} ${lib.optionalString production "--production"} rebuild
+
+        if [ "''${dontNpmInstall-}" != "1" ]
+        then
+            # NPM tries to download packages even when they already exist if npm-shrinkwrap is used.
+            rm -f npm-shrinkwrap.json
+
+            npm ${forceOfflineFlag} --nodedir=${nodeSources} ${npmFlags} ${lib.optionalString production "--production"} install
+        fi
+    '';
+
+  # Builds and composes an NPM package including all its dependencies
+  buildNodePackage =
+    { name
+    , packageName
+    , version
+    , dependencies ? []
+    , buildInputs ? []
+    , production ? true
+    , npmFlags ? ""
+    , dontNpmInstall ? false
+    , bypassCache ? false
+    , reconstructLock ? false
+    , preRebuild ? ""
+    , dontStrip ? true
+    , unpackPhase ? "true"
+    , buildPhase ? "true"
+    , meta ? {}
+    , ... }@args:
+
+    let
+      extraArgs = removeAttrs args [ "name" "dependencies" "buildInputs" "dontStrip" "dontNpmInstall" "preRebuild" "unpackPhase" "buildPhase" "meta" ];
+    in
+    stdenv.mkDerivation ({
+      name = "${name}-${version}";
+      buildInputs = [ tarWrapper python nodejs ]
+        ++ lib.optional (stdenv.isLinux) utillinux
+        ++ lib.optional (stdenv.isDarwin) libtool
+        ++ buildInputs;
+
+      inherit nodejs;
+
+      inherit dontStrip; # Stripping may fail a build for some package deployments
+      inherit dontNpmInstall preRebuild unpackPhase buildPhase;
+
+      compositionScript = composePackage args;
+      pinpointDependenciesScript = pinpointDependenciesOfPackage args;
+
+      passAsFile = [ "compositionScript" "pinpointDependenciesScript" ];
+
+      installPhase = ''
+        source ${installPackage}
+
+        # Create and enter a root node_modules/ folder
+        mkdir -p $out/lib/node_modules
+        cd $out/lib/node_modules
+
+        # Compose the package and all its dependencies
+        source $compositionScriptPath
+
+        ${prepareAndInvokeNPM { inherit packageName bypassCache reconstructLock npmFlags production; }}
+
+        # Create symlink to the deployed executable folder, if applicable
+        if [ -d "$out/lib/node_modules/.bin" ]
+        then
+            ln -s $out/lib/node_modules/.bin $out/bin
+        fi
+
+        # Create symlinks to the deployed manual page folders, if applicable
+        if [ -d "$out/lib/node_modules/${packageName}/man" ]
+        then
+            mkdir -p $out/share
+            for dir in "$out/lib/node_modules/${packageName}/man/"*
+            do
+                mkdir -p $out/share/man/$(basename "$dir")
+                for page in "$dir"/*
+                do
+                    ln -s $page $out/share/man/$(basename "$dir")
+                done
+            done
+        fi
+
+        # Run post install hook, if provided
+        runHook postInstall
+      '';
+
+      meta = {
+        # default to Node.js' platforms
+        platforms = nodejs.meta.platforms;
+      } // meta;
+    } // extraArgs);
+
+  # Builds a node environment (a node_modules folder and a set of binaries)
+  buildNodeDependencies =
+    { name
+    , packageName
+    , version
+    , src
+    , dependencies ? []
+    , buildInputs ? []
+    , production ? true
+    , npmFlags ? ""
+    , dontNpmInstall ? false
+    , bypassCache ? false
+    , reconstructLock ? false
+    , dontStrip ? true
+    , unpackPhase ? "true"
+    , buildPhase ? "true"
+    , ... }@args:
+
+    let
+      extraArgs = removeAttrs args [ "name" "dependencies" "buildInputs" ];
+    in
+      stdenv.mkDerivation ({
+        name = "node-dependencies-${name}-${version}";
+
+        buildInputs = [ tarWrapper python nodejs ]
+          ++ lib.optional (stdenv.isLinux) utillinux
+          ++ lib.optional (stdenv.isDarwin) libtool
+          ++ buildInputs;
+
+        inherit dontStrip; # Stripping may fail a build for some package deployments
+        inherit dontNpmInstall unpackPhase buildPhase;
+
+        includeScript = includeDependencies { inherit dependencies; };
+        pinpointDependenciesScript = pinpointDependenciesOfPackage args;
+
+        passAsFile = [ "includeScript" "pinpointDependenciesScript" ];
+
+        installPhase = ''
+          source ${installPackage}
+
+          mkdir -p $out/${packageName}
+          cd $out/${packageName}
+
+          source $includeScriptPath
+
+          # Create fake package.json to make the npm commands work properly
+          cp ${src}/package.json .
+          chmod 644 package.json
+          ${lib.optionalString bypassCache ''
+            if [ -f ${src}/package-lock.json ]
+            then
+                cp ${src}/package-lock.json .
+            fi
+          ''}
+
+          # Go to the parent folder to make sure that all packages are pinpointed
+          cd ..
+          ${lib.optionalString (builtins.substring 0 1 packageName == "@") "cd .."}
+
+          ${prepareAndInvokeNPM { inherit packageName bypassCache reconstructLock npmFlags production; }}
+
+          # Expose the executables that were installed
+          cd ..
+          ${lib.optionalString (builtins.substring 0 1 packageName == "@") "cd .."}
+
+          mv ${packageName} lib
+          ln -s $out/lib/node_modules/.bin $out/bin
+        '';
+      } // extraArgs);
+
+  # Builds a development shell
+  buildNodeShell =
+    { name
+    , packageName
+    , version
+    , src
+    , dependencies ? []
+    , buildInputs ? []
+    , production ? true
+    , npmFlags ? ""
+    , dontNpmInstall ? false
+    , bypassCache ? false
+    , reconstructLock ? false
+    , dontStrip ? true
+    , unpackPhase ? "true"
+    , buildPhase ? "true"
+    , ... }@args:
+
+    let
+      nodeDependencies = buildNodeDependencies args;
+    in
+    stdenv.mkDerivation {
+      name = "node-shell-${name}-${version}";
+
+      buildInputs = [ python nodejs ] ++ lib.optional (stdenv.isLinux) utillinux ++ buildInputs;
+      buildCommand = ''
+        mkdir -p $out/bin
+        cat > $out/bin/shell <<EOF
+        #! ${stdenv.shell} -e
+        $shellHook
+        exec ${stdenv.shell}
+        EOF
+        chmod +x $out/bin/shell
+      '';
+
+      # Provide the dependencies in a development shell through the NODE_PATH environment variable
+      inherit nodeDependencies;
+      shellHook = lib.optionalString (dependencies != []) ''
+        export NODE_PATH=${nodeDependencies}/lib/node_modules
+        export PATH="${nodeDependencies}/bin:$PATH"
+      '';
+    };
+in
+{
+  buildNodeSourceDist = lib.makeOverridable buildNodeSourceDist;
+  buildNodePackage = lib.makeOverridable buildNodePackage;
+  buildNodeDependencies = lib.makeOverridable buildNodeDependencies;
+  buildNodeShell = lib.makeOverridable buildNodeShell;
+}

cluster/prod/app/cryptpad/build/nix.lock/node-packages.nix

@@ -0,0 +1,756 @@
+# This file has been generated by node2nix 1.9.0. Do not edit!
+
+{nodeEnv, fetchurl, fetchgit, nix-gitignore, stdenv, lib, globalBuildInputs ? []}:
+
+let
+  sources = {
+    "@mcrowe/minibloom-0.2.0" = {
+      name = "_at_mcrowe_slash_minibloom";
+      packageName = "@mcrowe/minibloom";
+      version = "0.2.0";
+      src = fetchurl {
+        url = "https://registry.npmjs.org/@mcrowe/minibloom/-/minibloom-0.2.0.tgz";
+        sha1 = "1bed96aec18388198da37443899b2c3ff5948053";
+      };
+    };
+    "accepts-1.3.8" = {
+      name = "accepts";
+      packageName = "accepts";
+      version = "1.3.8";
+      src = fetchurl {
+        url = "https://registry.npmjs.org/accepts/-/accepts-1.3.8.tgz";
+        sha512 = "PYAthTa2m2VKxuvSD3DPC/Gy+U+sOA1LAuT8mkmRuvw+NACSaeXEQ+NHcVF7rONl6qcaxV3Uuemwawk+7+SJLw==";
+      };
+    };
+    "array-flatten-1.1.1" = {
+      name = "array-flatten";
+      packageName = "array-flatten";
+      version = "1.1.1";
+      src = fetchurl {
+        url = "https://registry.npmjs.org/array-flatten/-/array-flatten-1.1.1.tgz";
+        sha1 = "9a5f699051b1e7073328f2a008968b64ea2955d2";
+      };
+    };
+    "async-limiter-1.0.1" = {
+      name = "async-limiter";
+      packageName = "async-limiter";
+      version = "1.0.1";
+      src = fetchurl {
+        url = "https://registry.npmjs.org/async-limiter/-/async-limiter-1.0.1.tgz";
+        sha512 = "csOlWGAcRFJaI6m+F2WKdnMKr4HhdhFVBk0H/QbJFMCr+uO2kwohwXQPxw/9OCxp05r5ghVBFSyioixx3gfkNQ==";
+      };
+    };
+    "body-parser-1.18.3" = {
+      name = "body-parser";
+      packageName = "body-parser";
+      version = "1.18.3";
+      src = fetchurl {
+        url = "https://registry.npmjs.org/body-parser/-/body-parser-1.18.3.tgz";
+        sha1 = "5b292198ffdd553b3a0f20ded0592b956955c8b4";
+      };
+    };
+    "bytes-3.0.0" = {
+      name = "bytes";
+      packageName = "bytes";
+      version = "3.0.0";
+      src = fetchurl {
+        url = "https://registry.npmjs.org/bytes/-/bytes-3.0.0.tgz";
+        sha1 = "d32815404d689699f85a4ea4fa8755dd13a96048";
+      };
+    };
+    "chainpad-crypto-0.2.7" = {
+      name = "chainpad-crypto";
+      packageName = "chainpad-crypto";
+      version = "0.2.7";
+      src = fetchurl {
+        url = "https://registry.npmjs.org/chainpad-crypto/-/chainpad-crypto-0.2.7.tgz";
+        sha512 = "H2FfFmMwWw4i8XeGVjKUNEmgOnJohlAvc5IpnVnHqCDm6axntpZ15rv9hV70uhzDrmFhlAPW8MoY4roe5PhUyA==";
+      };
+    };
+    "chainpad-server-5.1.0" = {
+      name = "chainpad-server";
+      packageName = "chainpad-server";
+      version = "5.1.0";
+      src = fetchurl {
+        url = "https://registry.npmjs.org/chainpad-server/-/chainpad-server-5.1.0.tgz";
+        sha512 = "BdjgOOLTXXo1EjQ7lURDe7oqsqfQISNvwhILfp3K3diY2K1hxpPLbjYzOSgxNOTADeOAff0xnInR5eUCESVWaQ==";
+      };
+    };
+    "content-disposition-0.5.2" = {
+      name = "content-disposition";
+      packageName = "content-disposition";
+      version = "0.5.2";
+      src = fetchurl {
+        url = "https://registry.npmjs.org/content-disposition/-/content-disposition-0.5.2.tgz";
+        sha1 = "0cf68bb9ddf5f2be7961c3a85178cb85dba78cb4";
+      };
+    };
+    "content-type-1.0.4" = {
+      name = "content-type";
+      packageName = "content-type";
+      version = "1.0.4";
+      src = fetchurl {
+        url = "https://registry.npmjs.org/content-type/-/content-type-1.0.4.tgz";
+        sha512 = "hIP3EEPs8tB9AT1L+NUqtwOAps4mk2Zob89MWXMHjHWg9milF/j4osnnQLXBCBFBk/tvIG/tUc9mOUJiPBhPXA==";
+      };
+    };
+    "cookie-0.3.1" = {
+      name = "cookie";
+      packageName = "cookie";
+      version = "0.3.1";
+      src = fetchurl {
+        url = "https://registry.npmjs.org/cookie/-/cookie-0.3.1.tgz";
+        sha1 = "e7e0a1f9ef43b4c8ba925c5c5a96e806d16873bb";
+      };
+    };
+    "cookie-signature-1.0.6" = {
+      name = "cookie-signature";
+      packageName = "cookie-signature";
+      version = "1.0.6";
+      src = fetchurl {
+        url = "https://registry.npmjs.org/cookie-signature/-/cookie-signature-1.0.6.tgz";
+        sha1 = "e303a882b342cc3ee8ca513a79999734dab3ae2c";
+      };
+    };
+    "debug-2.6.9" = {
+      name = "debug";
+      packageName = "debug";
+      version = "2.6.9";
+      src = fetchurl {
+        url = "https://registry.npmjs.org/debug/-/debug-2.6.9.tgz";
+        sha512 = "bC7ElrdJaJnPbAP+1EotYvqZsb3ecl5wi6Bfi6BJTUcNowp6cvspg0jXznRTKDjm/E7AdgFBVeAPVMNcKGsHMA==";
+      };
+    };
+    "depd-1.1.2" = {
+      name = "depd";
+      packageName = "depd";
+      version = "1.1.2";
+      src = fetchurl {
+        url = "https://registry.npmjs.org/depd/-/depd-1.1.2.tgz";
+        sha1 = "9bcd52e14c097763e749b274c4346ed2e560b5a9";
+      };
+    };
+    "destroy-1.0.4" = {
+      name = "destroy";
+      packageName = "destroy";
+      version = "1.0.4";
+      src = fetchurl {
+        url = "https://registry.npmjs.org/destroy/-/destroy-1.0.4.tgz";
+        sha1 = "978857442c44749e4206613e37946205826abd80";
+      };
+    };
+    "ee-first-1.1.1" = {
+      name = "ee-first";
+      packageName = "ee-first";
+      version = "1.1.1";
+      src = fetchurl {
+        url = "https://registry.npmjs.org/ee-first/-/ee-first-1.1.1.tgz";
+        sha1 = "590c61156b0ae2f4f0255732a158b266bc56b21d";
+      };
+    };
+    "encodeurl-1.0.2" = {
+      name = "encodeurl";
+      packageName = "encodeurl";
+      version = "1.0.2";
+      src = fetchurl {
+        url = "https://registry.npmjs.org/encodeurl/-/encodeurl-1.0.2.tgz";
+        sha1 = "ad3ff4c86ec2d029322f5a02c3a9a606c95b3f59";
+      };
+    };
+    "escape-html-1.0.3" = {
+      name = "escape-html";
+      packageName = "escape-html";
+      version = "1.0.3";
+      src = fetchurl {
+        url = "https://registry.npmjs.org/escape-html/-/escape-html-1.0.3.tgz";
+        sha1 = "0258eae4d3d0c0974de1c169188ef0051d1d1988";
+      };
+    };
+    "etag-1.8.1" = {
+      name = "etag";
+      packageName = "etag";
+      version = "1.8.1";
+      src = fetchurl {
+        url = "https://registry.npmjs.org/etag/-/etag-1.8.1.tgz";
+        sha1 = "41ae2eeb65efa62268aebfea83ac7d79299b0887";
+      };
+    };
+    "express-4.16.4" = {
+      name = "express";
+      packageName = "express";
+      version = "4.16.4";
+      src = fetchurl {
+        url = "https://registry.npmjs.org/express/-/express-4.16.4.tgz";
+        sha512 = "j12Uuyb4FMrd/qQAm6uCHAkPtO8FDTRJZBDd5D2KOL2eLaz1yUNdUB/NOIyq0iU4q4cFarsUCrnFDPBcnksuOg==";
+      };
+    };
+    "finalhandler-1.1.1" = {
+      name = "finalhandler";
+      packageName = "finalhandler";
+      version = "1.1.1";
+      src = fetchurl {
+        url = "https://registry.npmjs.org/finalhandler/-/finalhandler-1.1.1.tgz";
+        sha512 = "Y1GUDo39ez4aHAw7MysnUD5JzYX+WaIj8I57kO3aEPT1fFRL4sr7mjei97FgnwhAyyzRYmQZaTHb2+9uZ1dPtg==";
+      };
+    };
+    "forwarded-0.2.0" = {
+      name = "forwarded";
+      packageName = "forwarded";
+      version = "0.2.0";
+      src = fetchurl {
+        url = "https://registry.npmjs.org/forwarded/-/forwarded-0.2.0.tgz";
+        sha512 = "buRG0fpBtRHSTCOASe6hD258tEubFoRLb4ZNA6NxMVHNw2gOcwHo9wyablzMzOA5z9xA9L1KNjk/Nt6MT9aYow==";
+      };
+    };
+    "fresh-0.5.2" = {
+      name = "fresh";
+      packageName = "fresh";
+      version = "0.5.2";
+      src = fetchurl {
+        url = "https://registry.npmjs.org/fresh/-/fresh-0.5.2.tgz";
+        sha1 = "3d8cadd90d976569fa835ab1f8e4b23a105605a7";
+      };
+    };
+    "fs-extra-7.0.1" = {
+      name = "fs-extra";
+      packageName = "fs-extra";
+      version = "7.0.1";
+      src = fetchurl {
+        url = "https://registry.npmjs.org/fs-extra/-/fs-extra-7.0.1.tgz";
+        sha512 = "YJDaCJZEnBmcbw13fvdAM9AwNOJwOzrE4pqMqBq5nFiEqXUqHwlK4B+3pUw6JNvfSPtX05xFHtYy/1ni01eGCw==";
+      };
+    };
+    "gar-1.0.4" = {
+      name = "gar";
+      packageName = "gar";
+      version = "1.0.4";
+      src = fetchurl {
+        url = "https://registry.npmjs.org/gar/-/gar-1.0.4.tgz";
+        sha512 = "w4n9cPWyP7aHxKxYHFQMegj7WIAsL/YX/C4Bs5Rr8s1H9M1rNtRWRsw+ovYMkXDQ5S4ZbYHsHAPmevPjPgw44w==";
+      };
+    };
+    "get-folder-size-2.0.1" = {
+      name = "get-folder-size";
+      packageName = "get-folder-size";
+      version = "2.0.1";
+      src = fetchurl {
+        url = "https://registry.npmjs.org/get-folder-size/-/get-folder-size-2.0.1.tgz";
+        sha512 = "+CEb+GDCM7tkOS2wdMKTn9vU7DgnKUTuDlehkNJKNSovdCOVxs14OfKCk4cvSaR3za4gj+OBdl9opPN9xrJ0zA==";
+      };
+    };
+    "graceful-fs-4.2.10" = {
+      name = "graceful-fs";
+      packageName = "graceful-fs";
+      version = "4.2.10";
+      src = fetchurl {
+        url = "https://registry.npmjs.org/graceful-fs/-/graceful-fs-4.2.10.tgz";
+        sha512 = "9ByhssR2fPVsNZj478qUUbKfmL0+t5BDVyjShtyZZLiK7ZDAArFFfopyOTj0M05wE2tJPisA4iTnnXl2YoPvOA==";
+      };
+    };
+    "http-errors-1.6.3" = {
+      name = "http-errors";
+      packageName = "http-errors";
+      version = "1.6.3";
+      src = fetchurl {
+        url = "https://registry.npmjs.org/http-errors/-/http-errors-1.6.3.tgz";
+        sha1 = "8b55680bb4be283a0b5bf4ea2e38580be1d9320d";
+      };
+    };
+    "iconv-lite-0.4.23" = {
+      name = "iconv-lite";
+      packageName = "iconv-lite";
+      version = "0.4.23";
+      src = fetchurl {
+        url = "https://registry.npmjs.org/iconv-lite/-/iconv-lite-0.4.23.tgz";
+        sha512 = "neyTUVFtahjf0mB3dZT77u+8O0QB89jFdnBkd5P1JgYPbPaia3gXXOVL2fq8VyU2gMMD7SaN7QukTB/pmXYvDA==";
+      };
+    };
+    "inherits-2.0.3" = {
+      name = "inherits";
+      packageName = "inherits";
+      version = "2.0.3";
+      src = fetchurl {
+        url = "https://registry.npmjs.org/inherits/-/inherits-2.0.3.tgz";
+        sha1 = "633c2c83e3da42a502f52466022480f4208261de";
+      };
+    };
+    "ipaddr.js-1.9.1" = {
+      name = "ipaddr.js";
+      packageName = "ipaddr.js";
+      version = "1.9.1";
+      src = fetchurl {
+        url = "https://registry.npmjs.org/ipaddr.js/-/ipaddr.js-1.9.1.tgz";
+        sha512 = "0KI/607xoxSToH7GjN1FfSbLoU0+btTicjsQSWQlh/hZykN8KpmMf7uYwPW3R+akZ6R/w18ZlXSHBYXiYUPO3g==";
+      };
+    };
+    "jsonfile-4.0.0" = {
+      name = "jsonfile";
+      packageName = "jsonfile";
+      version = "4.0.0";
+      src = fetchurl {
+        url = "https://registry.npmjs.org/jsonfile/-/jsonfile-4.0.0.tgz";
+        sha1 = "8771aae0799b64076b76640fca058f9c10e33ecb";
+      };
+    };
+    "lex-1.7.9" = {
+      name = "lex";
+      packageName = "lex";
+      version = "1.7.9";
+      src = fetchurl {
+        url = "https://registry.npmjs.org/lex/-/lex-1.7.9.tgz";
+        sha1 = "5d5636ccef574348362938b79a47f0eed8ed0d43";
+      };
+    };
+    "looper-3.0.0" = {
+      name = "looper";
+      packageName = "looper";
+      version = "3.0.0";
+      src = fetchurl {
+        url = "https://registry.npmjs.org/looper/-/looper-3.0.0.tgz";
+        sha1 = "2efa54c3b1cbaba9b94aee2e5914b0be57fbb749";
+      };
+    };
+    "media-typer-0.3.0" = {
+      name = "media-typer";
+      packageName = "media-typer";
+      version = "0.3.0";
+      src = fetchurl {
+        url = "https://registry.npmjs.org/media-typer/-/media-typer-0.3.0.tgz";
+        sha1 = "8710d7af0aa626f8fffa1ce00168545263255748";
+      };
+    };
+    "merge-descriptors-1.0.1" = {
+      name = "merge-descriptors";
+      packageName = "merge-descriptors";
+      version = "1.0.1";
+      src = fetchurl {
+        url = "https://registry.npmjs.org/merge-descriptors/-/merge-descriptors-1.0.1.tgz";
+        sha1 = "b00aaa556dd8b44568150ec9d1b953f3f90cbb61";
+      };
+    };
+    "methods-1.1.2" = {
+      name = "methods";
+      packageName = "methods";
+      version = "1.1.2";
+      src = fetchurl {
+        url = "https://registry.npmjs.org/methods/-/methods-1.1.2.tgz";
+        sha1 = "5529a4d67654134edcc5266656835b0f851afcee";
+      };
+    };
+    "mime-1.4.1" = {
+      name = "mime";
+      packageName = "mime";
+      version = "1.4.1";
+      src = fetchurl {
+        url = "https://registry.npmjs.org/mime/-/mime-1.4.1.tgz";
+        sha512 = "KI1+qOZu5DcW6wayYHSzR/tXKCDC5Om4s1z2QJjDULzLcmf3DvzS7oluY4HCTrc+9FiKmWUgeNLg7W3uIQvxtQ==";
+      };
+    };
+    "mime-db-1.52.0" = {
+      name = "mime-db";
+      packageName = "mime-db";
+      version = "1.52.0";
+      src = fetchurl {
+        url = "https://registry.npmjs.org/mime-db/-/mime-db-1.52.0.tgz";
+        sha512 = "sPU4uV7dYlvtWJxwwxHD0PuihVNiE7TyAbQ5SWxDCB9mUYvOgroQOwYQQOKPJ8CIbE+1ETVlOoK1UC2nU3gYvg==";
+      };
+    };
+    "mime-types-2.1.35" = {
+      name = "mime-types";
+      packageName = "mime-types";
+      version = "2.1.35";
+      src = fetchurl {
+        url = "https://registry.npmjs.org/mime-types/-/mime-types-2.1.35.tgz";
+        sha512 = "ZDY+bPm5zTTF+YpCrAU9nK0UgICYPT0QtT1NZWFv4s++TNkcgVaT0g6+4R2uI4MjQjzysHB1zxuWL50hzaeXiw==";
+      };
+    };
+    "ms-2.0.0" = {
+      name = "ms";
+      packageName = "ms";
+      version = "2.0.0";
+      src = fetchurl {
+        url = "https://registry.npmjs.org/ms/-/ms-2.0.0.tgz";
+        sha1 = "5608aeadfc00be6c2901df5f9861788de0d597c8";
+      };
+    };
+    "negotiator-0.6.3" = {
+      name = "negotiator";
+      packageName = "negotiator";
+      version = "0.6.3";
+      src = fetchurl {
+        url = "https://registry.npmjs.org/negotiator/-/negotiator-0.6.3.tgz";
+        sha512 = "+EUsqGPLsM+j/zdChZjsnX51g4XrHFOIXwfnCVPGlQk/k5giakcKsuxCObBRu6DSm9opw/O6slWbJdghQM4bBg==";
+      };
+    };
+    "netflux-websocket-0.1.21" = {
+      name = "netflux-websocket";
+      packageName = "netflux-websocket";
+      version = "0.1.21";
+      src = fetchurl {
+        url = "https://registry.npmjs.org/netflux-websocket/-/netflux-websocket-0.1.21.tgz";
+        sha512 = "Zjl5lefg8urC0a0T7YCPGiUgRsISZBsTZl1STylmQz8Bq4ohcZ8cP3r6VoCpeVcvJ1Y/e3ZCXPxndWlNP9Jfug==";
+      };
+    };
+    "nthen-0.1.8" = {
+      name = "nthen";
+      packageName = "nthen";
+      version = "0.1.8";
+      src = fetchurl {
+        url = "https://registry.npmjs.org/nthen/-/nthen-0.1.8.tgz";
+        sha512 = "Oh2CwIbhj+wUT94lQV7LKmmgw3UYAGGd8oLIqp6btQN3Bz3PuWp4BuvtUo35H3rqDknjPfKx5P6mt7v+aJNjcw==";
+      };
+    };
+    "on-finished-2.3.0" = {
+      name = "on-finished";
+      packageName = "on-finished";
+      version = "2.3.0";
+      src = fetchurl {
+        url = "https://registry.npmjs.org/on-finished/-/on-finished-2.3.0.tgz";
+        sha1 = "20f1336481b083cd75337992a16971aa2d906947";
+      };
+    };
+    "parseurl-1.3.3" = {
+      name = "parseurl";
+      packageName = "parseurl";
+      version = "1.3.3";
+      src = fetchurl {
+        url = "https://registry.npmjs.org/parseurl/-/parseurl-1.3.3.tgz";
+        sha512 = "CiyeOxFT/JZyN5m0z9PfXw4SCBJ6Sygz1Dpl0wqjlhDEGGBP1GnsUVEL0p63hoG1fcj3fHynXi9NYO4nWOL+qQ==";
+      };
+    };
+    "path-to-regexp-0.1.7" = {
+      name = "path-to-regexp";
+      packageName = "path-to-regexp";
+      version = "0.1.7";
+      src = fetchurl {
+        url = "https://registry.npmjs.org/path-to-regexp/-/path-to-regexp-0.1.7.tgz";
+        sha1 = "df604178005f522f15eb4490e7247a1bfaa67f8c";
+      };
+    };
+    "proxy-addr-2.0.7" = {
+      name = "proxy-addr";
+      packageName = "proxy-addr";
+      version = "2.0.7";
+      src = fetchurl {
+        url = "https://registry.npmjs.org/proxy-addr/-/proxy-addr-2.0.7.tgz";
+        sha512 = "llQsMLSUDUPT44jdrU/O37qlnifitDP+ZwrmmZcoSKyLKvtZxpyV0n2/bD/N4tBAAZ/gJEdZU7KMraoK1+XYAg==";
+      };
+    };
+    "pull-stream-3.6.14" = {
+      name = "pull-stream";
+      packageName = "pull-stream";
+      version = "3.6.14";
+      src = fetchurl {
+        url = "https://registry.npmjs.org/pull-stream/-/pull-stream-3.6.14.tgz";
+        sha512 = "KIqdvpqHHaTUA2mCYcLG1ibEbu/LCKoJZsBWyv9lSYtPkJPBq8m3Hxa103xHi6D2thj5YXa0TqK3L3GUkwgnew==";
+      };
+    };
+    "qs-6.5.2" = {
+      name = "qs";
+      packageName = "qs";
+      version = "6.5.2";
+      src = fetchurl {
+        url = "https://registry.npmjs.org/qs/-/qs-6.5.2.tgz";
+        sha512 = "N5ZAX4/LxJmF+7wN74pUD6qAh9/wnvdQcjq9TZjevvXzSUo7bfmw91saqMjzGS2xq91/odN2dW/WOl7qQHNDGA==";
+      };
+    };
+    "range-parser-1.2.1" = {
+      name = "range-parser";
+      packageName = "range-parser";
+      version = "1.2.1";
+      src = fetchurl {
+        url = "https://registry.npmjs.org/range-parser/-/range-parser-1.2.1.tgz";
+        sha512 = "Hrgsx+orqoygnmhFbKaHE6c296J+HTAQXoxEF6gNupROmmGJRoyzfG3ccAveqCBrwr/2yxQ5BVd/GTl5agOwSg==";
+      };
+    };
+    "raw-body-2.3.3" = {
+      name = "raw-body";
+      packageName = "raw-body";
+      version = "2.3.3";
+      src = fetchurl {
+        url = "https://registry.npmjs.org/raw-body/-/raw-body-2.3.3.tgz";
+        sha512 = "9esiElv1BrZoI3rCDuOuKCBRbuApGGaDPQfjSflGxdy4oyzqghxu6klEkkVIvBje+FF0BX9coEv8KqW6X/7njw==";
+      };
+    };
+    "safe-buffer-5.1.2" = {
+      name = "safe-buffer";
+      packageName = "safe-buffer";
+      version = "5.1.2";
+      src = fetchurl {
+        url = "https://registry.npmjs.org/safe-buffer/-/safe-buffer-5.1.2.tgz";
+        sha512 = "Gd2UZBJDkXlY7GbJxfsE8/nvKkUEU1G38c1siN6QP6a9PT9MmHB8GnpscSmMJSoF8LOIrt8ud/wPtojys4G6+g==";
+      };
+    };
+    "safer-buffer-2.1.2" = {
+      name = "safer-buffer";
+      packageName = "safer-buffer";
+      version = "2.1.2";
+      src = fetchurl {
+        url = "https://registry.npmjs.org/safer-buffer/-/safer-buffer-2.1.2.tgz";
+        sha512 = "YZo3K82SD7Riyi0E1EQPojLz7kpepnSQI9IyPbHHg1XXXevb5dJI7tpyN2ADxGcQbHG7vcyRHk0cbwqcQriUtg==";
+      };
+    };
+    "saferphore-0.0.1" = {
+      name = "saferphore";
+      packageName = "saferphore";
+      version = "0.0.1";
+      src = fetchurl {
+        url = "https://registry.npmjs.org/saferphore/-/saferphore-0.0.1.tgz";
+        sha1 = "cc962eda4e2b2452e6437fd32dcfb6f69ef2ea63";
+      };
+    };
+    "send-0.16.2" = {
+      name = "send";
+      packageName = "send";
+      version = "0.16.2";
+      src = fetchurl {
+        url = "https://registry.npmjs.org/send/-/send-0.16.2.tgz";
+        sha512 = "E64YFPUssFHEFBvpbbjr44NCLtI1AohxQ8ZSiJjQLskAdKuriYEP6VyGEsRDH8ScozGpkaX1BGvhanqCwkcEZw==";
+      };
+    };
+    "serve-static-1.13.2" = {
+      name = "serve-static";
+      packageName = "serve-static";
+      version = "1.13.2";
+      src = fetchurl {
+        url = "https://registry.npmjs.org/serve-static/-/serve-static-1.13.2.tgz";
+        sha512 = "p/tdJrO4U387R9oMjb1oj7qSMaMfmOyd4j9hOFoxZe2baQszgHcSWjuya/CiT5kgZZKRudHNOA0pYXOl8rQ5nw==";
+      };
+    };
+    "setprototypeof-1.1.0" = {
+      name = "setprototypeof";
+      packageName = "setprototypeof";
+      version = "1.1.0";
+      src = fetchurl {
+        url = "https://registry.npmjs.org/setprototypeof/-/setprototypeof-1.1.0.tgz";
+        sha512 = "BvE/TwpZX4FXExxOxZyRGQQv651MSwmWKZGqvmPcRIjDqWub67kTKuIMx43cZZrS/cBBzwBcNDWoFxt2XEFIpQ==";
+      };
+    };
+    "sortify-1.0.4" = {
+      name = "sortify";
+      packageName = "sortify";
+      version = "1.0.4";
+      src = fetchurl {
+        url = "https://registry.npmjs.org/sortify/-/sortify-1.0.4.tgz";
+        sha1 = "f0178687c83231be8a34fc0ec5462ea957b60284";
+      };
+    };
+    "statuses-1.4.0" = {
+      name = "statuses";
+      packageName = "statuses";
+      version = "1.4.0";
+      src = fetchurl {
+        url = "https://registry.npmjs.org/statuses/-/statuses-1.4.0.tgz";
+        sha512 = "zhSCtt8v2NDrRlPQpCNtw/heZLtfUDqxBM1udqikb/Hbk52LK4nQSwr10u77iopCW5LsyHpuXS0GnEc48mLeew==";
+      };
+    };
+    "stream-to-pull-stream-1.7.3" = {
+      name = "stream-to-pull-stream";
+      packageName = "stream-to-pull-stream";
+      version = "1.7.3";
+      src = fetchurl {
+        url = "https://registry.npmjs.org/stream-to-pull-stream/-/stream-to-pull-stream-1.7.3.tgz";
+        sha512 = "6sNyqJpr5dIOQdgNy/xcDWwDuzAsAwVzhzrWlAPAQ7Lkjx/rv0wgvxEyKwTq6FmNd5rjTrELt/CLmaSw7crMGg==";
+      };
+    };
+    "tiny-each-async-2.0.3" = {
+      name = "tiny-each-async";
+      packageName = "tiny-each-async";
+      version = "2.0.3";
+      src = fetchurl {
+        url = "https://registry.npmjs.org/tiny-each-async/-/tiny-each-async-2.0.3.tgz";
+        sha1 = "8ebbbfd6d6295f1370003fbb37162afe5a0a51d1";
+      };
+    };
+    "tweetnacl-0.12.2" = {
+      name = "tweetnacl";
+      packageName = "tweetnacl";
+      version = "0.12.2";
+      src = fetchurl {
+        url = "https://registry.npmjs.org/tweetnacl/-/tweetnacl-0.12.2.tgz";
+        sha1 = "bd59f890507856fb0a1136acc3a8b44547e29ddb";
+      };
+    };
+    "type-is-1.6.18" = {
+      name = "type-is";
+      packageName = "type-is";
+      version = "1.6.18";
+      src = fetchurl {
+        url = "https://registry.npmjs.org/type-is/-/type-is-1.6.18.tgz";
+        sha512 = "TkRKr9sUTxEH8MdfuCSP7VizJyzRNMjj2J2do2Jr3Kym598JVdEksuzPQCnlFPW4ky9Q+iA+ma9BGm06XQBy8g==";
+      };
+    };
+    "ulimit-0.0.2" = {
+      name = "ulimit";
+      packageName = "ulimit";
+      version = "0.0.2";
+      src = fetchurl {
+        url = "https://registry.npmjs.org/ulimit/-/ulimit-0.0.2.tgz";
+        sha1 = "2b51f9dc8381ae4102636cec5eb338c2630588a0";
+      };
+    };
+    "ultron-1.1.1" = {
+      name = "ultron";
+      packageName = "ultron";
+      version = "1.1.1";
+      src = fetchurl {
+        url = "https://registry.npmjs.org/ultron/-/ultron-1.1.1.tgz";
+        sha512 = "UIEXBNeYmKptWH6z8ZnqTeS8fV74zG0/eRU9VGkpzz+LIJNs8W/zM/L+7ctCkRrgbNnnR0xxw4bKOr0cW0N0Og==";
+      };
+    };
+    "universalify-0.1.2" = {
+      name = "universalify";
+      packageName = "universalify";
+      version = "0.1.2";
+      src = fetchurl {
+        url = "https://registry.npmjs.org/universalify/-/universalify-0.1.2.tgz";
+        sha512 = "rBJeI5CXAlmy1pV+617WB9J63U6XcazHHF2f2dbJix4XzpUF0RS3Zbj0FGIOCAva5P/d/GBOYaACQ1w+0azUkg==";
+      };
+    };
+    "unpipe-1.0.0" = {
+      name = "unpipe";
+      packageName = "unpipe";
+      version = "1.0.0";
+      src = fetchurl {
+        url = "https://registry.npmjs.org/unpipe/-/unpipe-1.0.0.tgz";
+        sha1 = "b2bf4ee8514aae6165b4817829d21b2ef49904ec";
+      };
+    };
+    "utils-merge-1.0.1" = {
+      name = "utils-merge";
+      packageName = "utils-merge";
+      version = "1.0.1";
+      src = fetchurl {
+        url = "https://registry.npmjs.org/utils-merge/-/utils-merge-1.0.1.tgz";
+        sha1 = "9f95710f50a267947b2ccc124741c1028427e713";
+      };
+    };
+    "vary-1.1.2" = {
+      name = "vary";
+      packageName = "vary";
+      version = "1.1.2";
+      src = fetchurl {
+        url = "https://registry.npmjs.org/vary/-/vary-1.1.2.tgz";
+        sha1 = "2299f02c6ded30d4a5961b0b9f74524a18f634fc";
+      };
+    };
+    "ws-3.3.3" = {
+      name = "ws";
+      packageName = "ws";
+      version = "3.3.3";
+      src = fetchurl {
+        url = "https://registry.npmjs.org/ws/-/ws-3.3.3.tgz";
+        sha512 = "nnWLa/NwZSt4KQJu51MYlCcSQ5g7INpOrOMt4XV8j4dqTXdmlUmSHQ8/oLC069ckre0fRsgfvsKwbTdtKLCDkA==";
+      };
+    };
+  };
+  args = {
+    name = "cryptpad";
+    packageName = "cryptpad";
+    version = "4.14.1";
+    src = ./.;
+    dependencies = [
+      sources."@mcrowe/minibloom-0.2.0"
+      sources."accepts-1.3.8"
+      sources."array-flatten-1.1.1"
+      sources."async-limiter-1.0.1"
+      sources."body-parser-1.18.3"
+      sources."bytes-3.0.0"
+      sources."chainpad-crypto-0.2.7"
+      sources."chainpad-server-5.1.0"
+      sources."content-disposition-0.5.2"
+      sources."content-type-1.0.4"
+      sources."cookie-0.3.1"
+      sources."cookie-signature-1.0.6"
+      sources."debug-2.6.9"
+      sources."depd-1.1.2"
+      sources."destroy-1.0.4"
+      sources."ee-first-1.1.1"
+      sources."encodeurl-1.0.2"
+      sources."escape-html-1.0.3"
+      sources."etag-1.8.1"
+      sources."express-4.16.4"
+      sources."finalhandler-1.1.1"
+      sources."forwarded-0.2.0"
+      sources."fresh-0.5.2"
+      sources."fs-extra-7.0.1"
+      sources."gar-1.0.4"
+      sources."get-folder-size-2.0.1"
+      sources."graceful-fs-4.2.10"
+      sources."http-errors-1.6.3"
+      sources."iconv-lite-0.4.23"
+      sources."inherits-2.0.3"
+      sources."ipaddr.js-1.9.1"
+      sources."jsonfile-4.0.0"
+      sources."lex-1.7.9"
+      sources."looper-3.0.0"
+      sources."media-typer-0.3.0"
+      sources."merge-descriptors-1.0.1"
+      sources."methods-1.1.2"
+      sources."mime-db-1.52.0"
+      sources."mime-types-2.1.35"
+      sources."ms-2.0.0"
+      sources."negotiator-0.6.3"
+      sources."netflux-websocket-0.1.21"
+      sources."nthen-0.1.8"
+      sources."on-finished-2.3.0"
+      sources."parseurl-1.3.3"
+      sources."path-to-regexp-0.1.7"
+      sources."proxy-addr-2.0.7"
+      sources."pull-stream-3.6.14"
+      sources."qs-6.5.2"
+      sources."range-parser-1.2.1"
+      sources."raw-body-2.3.3"
+      sources."safe-buffer-5.1.2"
+      sources."safer-buffer-2.1.2"
+      sources."saferphore-0.0.1"
+      (sources."send-0.16.2" // {
+        dependencies = [
+          sources."mime-1.4.1"
+        ];
+      })
+      sources."serve-static-1.13.2"
+      sources."setprototypeof-1.1.0"
+      sources."sortify-1.0.4"
+      sources."statuses-1.4.0"
+      sources."stream-to-pull-stream-1.7.3"
+      sources."tiny-each-async-2.0.3"
+      sources."tweetnacl-0.12.2"
+      sources."type-is-1.6.18"
+      sources."ulimit-0.0.2"
+      sources."ultron-1.1.1"
+      sources."universalify-0.1.2"
+      sources."unpipe-1.0.0"
+      sources."utils-merge-1.0.1"
+      sources."vary-1.1.2"
+      sources."ws-3.3.3"
+    ];
+    buildInputs = globalBuildInputs;
+    meta = {
+      description = "realtime collaborative visual editor with zero knowlege server";
+      license = "AGPL-3.0+";
+    };
+    production = true;
+    bypassCache = true;
+    reconstructLock = false;
+  };
+in
+{
+  args = args;
+  sources = sources;
+  tarball = nodeEnv.buildNodeSourceDist args;
+  package = nodeEnv.buildNodePackage args;
+  shell = nodeEnv.buildNodeShell args;
+  nodeDependencies = nodeEnv.buildNodeDependencies (lib.overrideExisting args {
+    src = stdenv.mkDerivation {
+      name = args.name + "-package-json";
+      src = nix-gitignore.gitignoreSourcePure [
+        "*"
+        "!package.json"
+        "!package-lock.json"
+      ] args.src;
+      dontBuild = true;
+      installPhase = "mkdir -p $out; cp -r ./* $out;";
+    };
+  });
+}

cluster/prod/app/cryptpad/build/nix.lock/npm.nix

@@ -0,0 +1,17 @@
+# This file has been generated by node2nix 1.9.0. Do not edit!
+
+{pkgs ? import <nixpkgs> {
+    inherit system;
+  }, system ? builtins.currentSystem, nodejs ? pkgs."nodejs-12_x"}:
+
+let
+  nodeEnv = import ./node-env.nix {
+    inherit (pkgs) stdenv lib python2 runCommand writeTextFile writeShellScript;
+    inherit pkgs nodejs;
+    libtool = if pkgs.stdenv.isDarwin then pkgs.darwin.cctools else null;
+  };
+in
+import ./node-packages.nix {
+  inherit (pkgs) fetchurl nix-gitignore stdenv lib fetchgit;
+  inherit nodeEnv;
+}

cluster/prod/app/cryptpad/build/nix.lock/package.json

@@ -0,0 +1,55 @@
+{
+  "name": "cryptpad",
+  "description": "realtime collaborative visual editor with zero knowlege server",
+  "version": "4.14.1",
+  "license": "AGPL-3.0+",
+  "repository": {
+    "type": "git",
+    "url": "git+https://github.com/xwiki-labs/cryptpad.git"
+  },
+  "funding": {
+    "type": "opencollective",
+    "url": "https://opencollective.com/cryptpad"
+  },
+  "dependencies": {
+    "@mcrowe/minibloom": "^0.2.0",
+    "chainpad-crypto": "^0.2.5",
+    "chainpad-server": "^5.1.0",
+    "express": "~4.16.0",
+    "fs-extra": "^7.0.0",
+    "get-folder-size": "^2.0.1",
+    "netflux-websocket": "^0.1.20",
+    "nthen": "0.1.8",
+    "pull-stream": "^3.6.1",
+    "saferphore": "0.0.1",
+    "sortify": "^1.0.4",
+    "stream-to-pull-stream": "^1.7.2",
+    "tweetnacl": "~0.12.2",
+    "ulimit": "0.0.2",
+    "ws": "^3.3.1"
+  },
+  "devDependencies": {
+    "jshint": "^2.13.4",
+    "less": "3.7.1",
+    "lesshint": "6.3.7",
+    "selenium-webdriver": "^3.6.0"
+  },
+  "scripts": {
+    "start": "node server.js",
+    "dev": "DEV=1 node server.js",
+    "fresh": "FRESH=1 node server.js",
+    "offline": "FRESH=1 OFFLINE=1 node server.js",
+    "offlinedev": "DEV=1 OFFLINE=1 node server.js",
+    "package": "PACKAGE=1 node server.js",
+    "lint": "jshint --config .jshintrc --exclude-path .jshintignore . && ./node_modules/lesshint/bin/lesshint -c ./.lesshintrc ./customize.dist/src/less2/",
+    "lint:js": "jshint --config .jshintrc --exclude-path .jshintignore .",
+    "lint:server": "jshint --config .jshintrc lib",
+    "lint:less": "./node_modules/lesshint/bin/lesshint -c ./.lesshintrc ./customize.dist/src/less2/",
+    "lint:translations": "node ./scripts/translations/lint-translations.js",
+    "unused-translations": "node ./scripts/translations/unused-translations.js",
+    "test": "node scripts/TestSelenium.js",
+    "test-rpc": "cd scripts/tests && node test-rpc",
+    "template": "cd customize.dist/src && for page in ../index.html ../privacy.html ../terms.html ../contact.html ../what-is-cryptpad.html ../features.html ../../www/login/index.html ../../www/register/index.html ../../www/user/index.html;do echo $page; cp template.html $page; done;",
+    "evict-inactive": "node scripts/evict-inactive.js"
+  }
+}

cluster/prod/app/cryptpad/build/npins/default.nix

@@ -1,80 +0,0 @@
-# Generated by npins. Do not modify; will be overwritten regularly
-let
-  data = builtins.fromJSON (builtins.readFile ./sources.json);
-  version = data.version;
-
-  mkSource =
-    spec:
-    assert spec ? type;
-    let
-      path =
-        if spec.type == "Git" then
-          mkGitSource spec
-        else if spec.type == "GitRelease" then
-          mkGitSource spec
-        else if spec.type == "PyPi" then
-          mkPyPiSource spec
-        else if spec.type == "Channel" then
-          mkChannelSource spec
-        else
-          builtins.throw "Unknown source type ${spec.type}";
-    in
-    spec // { outPath = path; };
-
-  mkGitSource =
-    {
-      repository,
-      revision,
-      url ? null,
-      hash,
-      branch ? null,
-      ...
-    }:
-    assert repository ? type;
-    # At the moment, either it is a plain git repository (which has an url), or it is a GitHub/GitLab repository
-    # In the latter case, there we will always be an url to the tarball
-    if url != null then
-      (builtins.fetchTarball {
-        inherit url;
-        sha256 = hash; # FIXME: check nix version & use SRI hashes
-      })
-    else
-      assert repository.type == "Git";
-      let
-        urlToName =
-          url: rev:
-          let
-            matched = builtins.match "^.*/([^/]*)(\\.git)?$" repository.url;
-
-            short = builtins.substring 0 7 rev;
-
-            appendShort = if (builtins.match "[a-f0-9]*" rev) != null then "-${short}" else "";
-          in
-          "${if matched == null then "source" else builtins.head matched}${appendShort}";
-        name = urlToName repository.url revision;
-      in
-      builtins.fetchGit {
-        url = repository.url;
-        rev = revision;
-        inherit name;
-        # hash = hash;
-      };
-
-  mkPyPiSource =
-    { url, hash, ... }:
-    builtins.fetchurl {
-      inherit url;
-      sha256 = hash;
-    };
-
-  mkChannelSource =
-    { url, hash, ... }:
-    builtins.fetchTarball {
-      inherit url;
-      sha256 = hash;
-    };
-in
-if version == 3 then
-  builtins.mapAttrs (_: mkSource) data.pins
-else
-  throw "Unsupported format version ${toString version} in sources.json. Try running `npins upgrade`"

cluster/prod/app/cryptpad/build/npins/sources.json

@@ -1,11 +0,0 @@
-{
-  "pins": {
-    "nixpkgs": {
-      "type": "Channel",
-      "name": "nixos-24.05",
-      "url": "https://releases.nixos.org/nixos/24.05/nixos-24.05.5385.1719f27dd95f/nixexprs.tar.xz",
-      "hash": "0f7i315g1z8kjh10hvj2zv7y2vfqxmwvd96hwlcrr8aig6qq5gzm"
-    }
-  },
-  "version": 3
-}

cluster/prod/app/cryptpad/build/shell.nix

@@ -0,0 +1,31 @@
+let
+  common = import ./common.nix;
+  pkgs = import common.pkgsSrc {};
+
+  bower2nixRepo = (import common.bower2nixSrc {
+    inherit pkgs;
+  });  
+  bower2nix = bower2nixRepo // {
+    package = bower2nixRepo.package.override {
+      postInstall = "tsc";
+    };
+  };
+in
+  pkgs.mkShell {
+    nativeBuildInputs = [
+      bower2nix.package
+      pkgs.nodePackages.node2nix
+    ];
+
+    shellHook = ''
+function update_lock {
+  set -exuo pipefail
+  mkdir -p nix.lock
+  ${pkgs.wget}/bin/wget https://raw.githubusercontent.com/xwiki-labs/cryptpad/${common.cryptpadCommit}/package.json -O nix.lock/package.json
+  ${pkgs.wget}/bin/wget https://raw.githubusercontent.com/xwiki-labs/cryptpad/${common.cryptpadCommit}/package-lock.json -O nix.lock/package-lock.json
+  ${pkgs.wget}/bin/wget https://raw.githubusercontent.com/xwiki-labs/cryptpad/${common.cryptpadCommit}/bower.json -O nix.lock/bower.json
+  ${bower2nix.package}/bin/bower2nix nix.lock/bower.json nix.lock/bower.nix
+  ${pkgs.nodePackages.node2nix}/bin/node2nix --input nix.lock/package.json --lock nix.lock/package-lock.json --composition nix.lock/npm.nix --node-env nix.lock/node-env.nix --output nix.lock/node-packages.nix
+}
+    '';
+  }

cluster/prod/app/cryptpad/build_docker/Dockerfile

@@ -1,59 +0,0 @@
-# SPDX-FileCopyrightText: 2023 XWiki CryptPad Team <contact@cryptpad.org> and contributors
-#
-# SPDX-License-Identifier: AGPL-3.0-or-later
-#
-# Tweaks by Deuxfleurs
-
-# Multistage build to reduce image size and increase security
-FROM node:lts-slim AS build
-ENV DEBIAN_FRONTEND=noninteractive
-
-RUN apt-get update && apt-get install --no-install-recommends -y \
-    ca-certificates tar wget
-
-# Download the release tarball
-RUN wget https://github.com/cryptpad/cryptpad/archive/refs/tags/2024.9.0.tar.gz -O cryptpad.tar.gz
-
-# Create folder for CryptPad
-RUN mkdir /cryptpad
-
-# Extract the release into /cryptpad
-RUN tar xvzf cryptpad.tar.gz -C /cryptpad --strip-components 1
-
-# Go to /cryptpad
-WORKDIR /cryptpad
-
-# Install dependencies
-RUN npm install --production && npm run install:components
-
-# Create the actual CryptPad image
-FROM node:lts-slim
-ENV DEBIAN_FRONTEND=noninteractive
-
-# Install curl for healthcheck
-# Install git, rdfind and unzip for install-onlyoffice.sh
-RUN apt-get update && apt-get install --no-install-recommends -y \
-    curl ca-certificates git rdfind unzip && \
-    apt-get clean && \
-    rm -rf /var/lib/apt/lists/*
-
-# Copy cryptpad with installed modules
-COPY --from=build /cryptpad /cryptpad
-
-# Set workdir to cryptpad
-WORKDIR /cryptpad
-
-# Install onlyoffice
-RUN ./install-onlyoffice.sh --accept-license --trust-repository
-
-# Build static pages (?) unsure we need this
-RUN npm run build
-
-# Healthcheck
-HEALTHCHECK --interval=1m CMD curl -f http://localhost:3000/ || exit 1
-
-# Ports
-EXPOSE 3000 3003
-
-# Run cryptpad on startup
-CMD ["npm", "start"]

cluster/prod/app/cryptpad/config/config-debug.js

@@ -1,296 +0,0 @@
-/* globals module */
-
-/*  DISCLAIMER:
-
-    There are two recommended methods of running a CryptPad instance:
-
-    1. Using a standalone nodejs server without HTTPS (suitable for local development)
-    2. Using NGINX to serve static assets and to handle HTTPS for API server's websocket traffic
-
-    We do not officially recommend or support Apache, Docker, Kubernetes, Traefik, or any other configuration.
-    Support requests for such setups should be directed to their authors.
-
-    If you're having difficulty difficulty configuring your instance
-    we suggest that you join the project's IRC/Matrix channel.
-
-    If you don't have any difficulty configuring your instance and you'd like to
-    support us for the work that went into making it pain-free we are quite happy
-    to accept donations via our opencollective page: https://opencollective.com/cryptpad
-
-*/
-module.exports = {
-/*  CryptPad is designed to serve its content over two domains.
- *  Account passwords and cryptographic content is handled on the 'main' domain,
- *  while the user interface is loaded on a 'sandbox' domain
- *  which can only access information which the main domain willingly shares.
- *
- *  In the event of an XSS vulnerability in the UI (that's bad)
- *  this system prevents attackers from gaining access to your account (that's good).
- *
- *  Most problems with new instances are related to this system blocking access
- *  because of incorrectly configured sandboxes. If you only see a white screen
- *  when you try to load CryptPad, this is probably the cause.
- *
- *  PLEASE READ THE FOLLOWING COMMENTS CAREFULLY.
- *
- */
-
-/*  httpUnsafeOrigin is the URL that clients will enter to load your instance.
- *  Any other URL that somehow points to your instance is supposed to be blocked.
- *  The default provided below assumes you are loading CryptPad from a server
- *  which is running on the same machine, using port 3000.
- *
- *  In a production instance this should be available ONLY over HTTPS
- *  using the default port for HTTPS (443) ie. https://cryptpad.fr
- *  In such a case this should be also handled by NGINX, as documented in
- *  cryptpad/docs/example.nginx.conf (see the $main_domain variable)
- *
- */
-    httpUnsafeOrigin: 'https://pad-debug.deuxfleurs.fr',
-
-/*  httpSafeOrigin is the URL that is used for the 'sandbox' described above.
- *  If you're testing or developing with CryptPad on your local machine then
- *  it is appropriate to leave this blank. The default behaviour is to serve
- *  the main domain over port 3000 and to serve the sandbox content over port 3001.
- *
- *  This is not appropriate in a production environment where invasive networks
- *  may filter traffic going over abnormal ports.
- *  To correctly configure your production instance you must provide a URL
- *  with a different domain (a subdomain is sufficient).
- *  It will be used to load the UI in our 'sandbox' system.
- *
- *  This value corresponds to the $sandbox_domain variable
- *  in the example nginx file.
- *
- *  Note that in order for the sandboxing system to be effective
- *  httpSafeOrigin must be different from httpUnsafeOrigin.
- *
- *  CUSTOMIZE AND UNCOMMENT THIS FOR PRODUCTION INSTALLATIONS.
- */
-    httpSafeOrigin: "https://pad-sandbox-debug.deuxfleurs.fr",
-
-/*  httpAddress specifies the address on which the nodejs server
- *  should be accessible. By default it will listen on 127.0.0.1
- *  (IPv4 localhost on most systems). If you want it to listen on
- *  all addresses, including IPv6, set this to '::'.
- *
- */
-    httpAddress: '::',
-
-/*  httpPort specifies on which port the nodejs server should listen.
- *  By default it will serve content over port 3000, which is suitable
- *  for both local development and for use with the provided nginx example,
- *  which will proxy websocket traffic to your node server.
- *
- */
-    httpPort: 3000,
-
-/*  httpSafePort allows you to specify an alternative port from which
- *  the node process should serve sandboxed assets. The default value is
- *  that of your httpPort + 1. You probably don't need to change this.
- *
- */
-    // httpSafePort: 3001,
-
-/*  CryptPad will launch a child process for every core available
- *  in order to perform CPU-intensive tasks in parallel.
- *  Some host environments may have a very large number of cores available
- *  or you may want to limit how much computing power CryptPad can take.
- *  If so, set 'maxWorkers' to a positive integer.
- */
-    // maxWorkers: 4,
-
-    /* =====================
-     *         Admin
-     * ===================== */
-
-    /*
-     *  CryptPad contains an administration panel. Its access is restricted to specific
-     *  users using the following list.
-     *  To give access to the admin panel to a user account, just add their public signing
-     *  key, which can be found on the settings page for registered users.
-     *  Entries should be strings separated by a comma.
-     */
-    adminKeys: [
-      "[quentin@pad.deuxfleurs.fr/EWtzm-CiqJnM9RZL9mj-YyTgAtX-Zh76sru1K5bFpN8=]",
-      "[adrn@pad.deuxfleurs.fr/PxDpkPwd-jDJWkfWdAzFX7wtnLpnPlBeYZ4MmoEYS6E=]",
-      "[lx@pad.deuxfleurs.fr/FwQzcXywx1FIb83z6COB7c3sHnz8rNSDX1xhjPuH3Fg=]",
-      "[trinity-1686a@pad-debug.deuxfleurs.fr/Pu6Ef03jEsAGBbZI6IOdKd6+5pORD5N51QIYt4-Ys1c=]",
-      "[Jill@pad.deuxfleurs.fr/tLW7W8EVNB2KYETXEaOYR+HmNiBQtZj7u+SOxS3hGmg=]",
-      "[vincent@pad.deuxfleurs.fr/07FQiE8w1iztRWwzbRJzEy3xIqnNR31mUFjLNiGXjwU=]",
-      "[boris@pad.deuxfleurs.fr/kHo5LIhSxDFk39GuhGRp+XKlMjNe+lWfFWM75cINoTQ=]",
-      "[maximilien@pad.deuxfleurs.fr/UoXHLejYRUjvX6t55hAQKpjMdU-3ecg4eDhAeckZmyE=]",
-      "[armael@pad-debug.deuxfleurs.fr/CIKMvNdFxGavwTmni0TnR3x9GM0ypgx3DMcFyzppplU=]",
-      "[bjonglez@pad-debug.deuxfleurs.fr/+RRzwcLPj5ZCWELUXMjmt3u+-lvYnyhpDt4cqAn9nh8=]"
-    ],
-
-    /* =====================
-     *        STORAGE
-     * ===================== */
-
-    /*  Pads that are not 'pinned' by any registered user can be set to expire
-     *  after a configurable number of days of inactivity (default 90 days).
-     *  The value can be changed or set to false to remove expiration.
-     *  Expired pads can then be removed using a cron job calling the
-     *  `evict-inactive.js` script with node
-     *
-     *  defaults to 90 days if nothing is provided
-     */
-    //inactiveTime: 90, // days
-
-    /*  CryptPad archives some data instead of deleting it outright.
-     *  This archived data still takes up space and so you'll probably still want to
-     *  remove these files after a brief period.
-     *
-     *  cryptpad/scripts/evict-inactive.js is intended to be run daily
-     *  from a crontab or similar scheduling service.
-     *
-     *  The intent with this feature is to provide a safety net in case of accidental
-     *  deletion. Set this value to the number of days you'd like to retain
-     *  archived data before it's removed permanently.
-     *
-     *  defaults to 15 days if nothing is provided
-     */
-    //archiveRetentionTime: 15,
-
-    /*  It's possible to configure your instance to remove data
-     *  stored on behalf of inactive accounts. Set 'accountRetentionTime'
-     *  to the number of days an account can remain idle before its
-     *  documents and other account data is removed.
-     *
-     *  Leave this value commented out to preserve all data stored
-     *  by user accounts regardless of inactivity.
-     */
-     //accountRetentionTime: 365,
-
-    /*  Starting with CryptPad 3.23.0, the server automatically runs
-     *  the script responsible for removing inactive data according to
-     *  your configured definition of inactivity. Set this value to `true`
-     *  if you prefer not to remove inactive data, or if you prefer to
-     *  do so manually using `scripts/evict-inactive.js`.
-     */
-    //disableIntegratedEviction: true,
-
-
-    /*  Max Upload Size (bytes)
-     *  this sets the maximum size of any one file uploaded to the server.
-     *  anything larger than this size will be rejected
-     *  defaults to 20MB if no value is provided
-     */
-    //maxUploadSize: 20 * 1024 * 1024,
-
-    /*  Users with premium accounts (those with a plan included in their customLimit)
-     *  can benefit from an increased upload size limit. By default they are restricted to the same
-     *  upload size as any other registered user.
-     *
-     */
-    //premiumUploadSize: 100 * 1024 * 1024,
-
-    /* =====================
-     *   DATABASE VOLUMES
-     * ===================== */
-
-    /*
-     * We need this config entry, else CryptPad will try to mkdir
-     * some stuff into Nix store apparently...
-     */
-    base: '/mnt/data',
-
-    /*
-     *  CryptPad stores each document in an individual file on your hard drive.
-     *  Specify a directory where files should be stored.
-     *  It will be created automatically if it does not already exist.
-     */
-    filePath: '/mnt/datastore/',
-
-    /*  CryptPad offers the ability to archive data for a configurable period
-     *  before deleting it, allowing a means of recovering data in the event
-     *  that it was deleted accidentally.
-     *
-     *  To set the location of this archive directory to a custom value, change
-     *  the path below:
-     */
-    archivePath: '/mnt/data/archive',
-
-    /*  CryptPad allows logged in users to request that particular documents be
-     *  stored by the server indefinitely. This is called 'pinning'.
-     *  Pin requests are stored in a pin-store. The location of this store is
-     *  defined here.
-     */
-    pinPath: '/mnt/data/pins',
-
-    /*  if you would like the list of scheduled tasks to be stored in
-        a custom location, change the path below:
-    */
-    taskPath: '/mnt/data/tasks',
-
-    /*  if you would like users' authenticated blocks to be stored in
-        a custom location, change the path below:
-    */
-    blockPath: '/mnt/block',
-
-    /*  CryptPad allows logged in users to upload encrypted files. Files/blobs
-     *  are stored in a 'blob-store'. Set its location here.
-     */
-    blobPath: '/mnt/blob',
-
-    /*  CryptPad stores incomplete blobs in a 'staging' area until they are
-     *  fully uploaded. Set its location here.
-     */
-    blobStagingPath: '/mnt/data/blobstage',
-
-    decreePath: '/mnt/data/decrees',
-
-    /* CryptPad supports logging events directly to the disk in a 'logs' directory
-     * Set its location here, or set it to false (or nothing) if you'd rather not log
-     */
-    logPath: false,
-
-    /* =====================
-     *       Debugging
-     * ===================== */
-
-    /*  CryptPad can log activity to stdout
-     *  This may be useful for debugging
-     */
-    logToStdout: true,
-
-    /* CryptPad can be configured to log more or less
-     * the various settings are listed below by order of importance
-     *
-     * silly, verbose, debug, feedback, info, warn, error
-     *
-     * Choose the least important level of logging you wish to see.
-     * For example, a 'silly' logLevel will display everything,
-     * while 'info' will display 'info', 'warn', and 'error' logs
-     *
-     * This will affect both logging to the console and the disk.
-     */
-    logLevel: 'silly',
-
-    /*  clients can use the /settings/ app to opt out of usage feedback
-     *  which informs the server of things like how much each app is being
-     *  used, and whether certain clientside features are supported by
-     *  the client's browser. The intent is to provide feedback to the admin
-     *  such that the service can be improved. Enable this with `true`
-     *  and ignore feedback with `false` or by commenting the attribute
-     *
-     *  You will need to set your logLevel to include 'feedback'. Set this
-     *  to false if you'd like to exclude feedback from your logs.
-     */
-    logFeedback: false,
-
-    /*  CryptPad supports verbose logging
-     *  (false by default)
-     */
-    verbose: true,
-
-    /*  Surplus information:
-     *
-     *  'installMethod' is included in server telemetry to voluntarily
-     *  indicate how many instances are using unofficial installation methods
-     *  such as Docker.
-     *
-     */
-    installMethod: 'deuxfleurs.fr',
-};

cluster/prod/app/cryptpad/config/config.js

@@ -114,14 +114,7 @@ module.exports = {
     adminKeys: [
       "[quentin@pad.deuxfleurs.fr/EWtzm-CiqJnM9RZL9mj-YyTgAtX-Zh76sru1K5bFpN8=]",
       "[adrn@pad.deuxfleurs.fr/PxDpkPwd-jDJWkfWdAzFX7wtnLpnPlBeYZ4MmoEYS6E=]",
-      "[lx@pad.deuxfleurs.fr/FwQzcXywx1FIb83z6COB7c3sHnz8rNSDX1xhjPuH3Fg=]",
+      "[lx@pad.deuxfleurs.fr/FwQzcXywx1FIb83z6COB7c3sHnz8rNSDX1xhjPuH3Fg=]"
-      "[trinity-1686a@pad.deuxfleurs.fr/Pu6Ef03jEsAGBbZI6IOdKd6+5pORD5N51QIYt4-Ys1c=]",
-      "[Jill@pad.deuxfleurs.fr/tLW7W8EVNB2KYETXEaOYR+HmNiBQtZj7u+SOxS3hGmg=]",
-      "[vincent@pad.deuxfleurs.fr/07FQiE8w1iztRWwzbRJzEy3xIqnNR31mUFjLNiGXjwU=]",
-      "[boris@pad.deuxfleurs.fr/kHo5LIhSxDFk39GuhGRp+XKlMjNe+lWfFWM75cINoTQ=]",
-      "[maximilien@pad.deuxfleurs.fr/UoXHLejYRUjvX6t55hAQKpjMdU-3ecg4eDhAeckZmyE=]",
-      "[armael@pad.deuxfleurs.fr/CIKMvNdFxGavwTmni0TnR3x9GM0ypgx3DMcFyzppplU=]",
-      "[bjonglez@pad.deuxfleurs.fr/+RRzwcLPj5ZCWELUXMjmt3u+-lvYnyhpDt4cqAn9nh8=]"
     ],
 
     /* =====================
@@ -190,18 +183,12 @@ module.exports = {
      *   DATABASE VOLUMES
      * ===================== */
 
-    /*
-     * We need this config entry, else CryptPad will try to mkdir
-     * some stuff into Nix store apparently...
-     */
-    base: '/mnt/data',
-
     /*
      *  CryptPad stores each document in an individual file on your hard drive.
      *  Specify a directory where files should be stored.
      *  It will be created automatically if it does not already exist.
      */
-    filePath: '/mnt/datastore/',
+    filePath: './root/mnt/datastore/',
 
     /*  CryptPad offers the ability to archive data for a configurable period
      *  before deleting it, allowing a means of recovering data in the event
@@ -210,36 +197,36 @@ module.exports = {
      *  To set the location of this archive directory to a custom value, change
      *  the path below:
      */
-    archivePath: '/mnt/data/archive',
+    archivePath: './root/mnt/data/archive',
 
     /*  CryptPad allows logged in users to request that particular documents be
      *  stored by the server indefinitely. This is called 'pinning'.
      *  Pin requests are stored in a pin-store. The location of this store is
      *  defined here.
      */
-    pinPath: '/mnt/data/pins',
+    pinPath: './root/mnt/data/pins',
 
     /*  if you would like the list of scheduled tasks to be stored in
         a custom location, change the path below:
     */
-    taskPath: '/mnt/data/tasks',
+    taskPath: './root/mnt/data/tasks',
 
     /*  if you would like users' authenticated blocks to be stored in
         a custom location, change the path below:
     */
-    blockPath: '/mnt/block',
+    blockPath: './root/mnt/block',
 
     /*  CryptPad allows logged in users to upload encrypted files. Files/blobs
      *  are stored in a 'blob-store'. Set its location here.
      */
-    blobPath: '/mnt/blob',
+    blobPath: './root/mnt/blob',
 
     /*  CryptPad stores incomplete blobs in a 'staging' area until they are
      *  fully uploaded. Set its location here.
      */
-    blobStagingPath: '/mnt/data/blobstage',
+    blobStagingPath: './root/mnt/data/blobstage',
 
-    decreePath: '/mnt/data/decrees',
+    decreePath: './root/mnt/data/decrees',
 
     /* CryptPad supports logging events directly to the disk in a 'logs' directory
      * Set its location here, or set it to false (or nothing) if you'd rather not log

cluster/prod/app/cryptpad/deploy/cryptpad.hcl

@@ -1,5 +1,5 @@
 job "cryptpad" {
-  datacenters = ["scorpio"]
+  datacenters = ["neptune"]
   type = "service"
   
   group "cryptpad" {
@@ -22,20 +22,20 @@ job "cryptpad" {
       constraint {
         attribute = "${attr.unique.hostname}"
         operator = "="
-        value = "abricot"
+        value = "concombre"
       }
 
       config {
-        image = "kokakiwi/cryptpad:2024.9.0"
+        image = "superboum/cryptpad:0p3s44hjh4s1x55kbwkmywmwmx4wfyb8"
         ports = [ "http" ]
 
         volumes = [
           "/mnt/ssd/cryptpad:/mnt",
-          "secrets/config.js:/cryptpad/config.js",
+          "secrets/config.js:/etc/cryptpad/config.js",
         ]
       }
       env {
-        CRYPTPAD_CONFIG = "/cryptpad/config.js"
+        CRYPTPAD_CONFIG = "/etc/cryptpad/config.js"
       }
 
       template {
@@ -63,10 +63,6 @@ job "cryptpad" {
           "tricot pad-sandbox.deuxfleurs.fr",
           "tricot-add-header Cross-Origin-Resource-Policy cross-origin",
           "tricot-add-header Cross-Origin-Embedder-Policy require-corp",
-          "tricot-add-header Access-Control-Allow-Origin *",
-          "tricot-add-header Access-Control-Allow-Credentials true",
-          "d53-cname pad.deuxfleurs.fr",
-          "d53-cname pad-sandbox.deuxfleurs.fr",
         ]
         check {
           type = "http"

cluster/prod/app/email/config/dkim/signingtable

@@ -7,5 +7,3 @@
 *@e-x-t-r-a-c-t.me smtp._domainkey.deuxfleurs.fr
 *@courderec.re smtp._domainkey.deuxfleurs.fr
 *@trinity.fr.eu.org smtp._domainkey.deuxfleurs.fr
-*@scrutin.app smtp._domainkey.deuxfleurs.fr
-*@lalis.se smtp._domainkey.deuxfleurs.fr

cluster/prod/app/email/config/postfix/main.cf

@@ -83,14 +83,11 @@ smtpd_forbid_unauth_pipelining = yes
 smtpd_discard_ehlo_keywords = chunking
 smtpd_forbid_bare_newline = yes
 
+smtpd_client_connection_rate_limit = 2
+
 #===
 # Rate limiting
 #===
-smtpd_client_connection_rate_limit = 2
-# do not rate-limit ourselves
-# in particular, useful for forgejo who opens a lot of SMTP connections
-smtpd_client_event_limit_exceptions = $mynetworks /etc/postfix/rate-limit-exceptions
-
 slow_destination_recipient_limit = 20
 slow_destination_concurrency_limit = 2
 

cluster/prod/app/email/deploy/email-android7.hcl

@@ -1,6 +1,5 @@
 job "email-android7" {
-  # Should not run on the same site as email.hcl (port conflict in diplonat)
+  datacenters = ["neptune"]
-  datacenters = ["scorpio", "bespin"]
   type = "service"
   priority = 100
 
@@ -42,7 +41,7 @@ job "email-android7" {
 
       resources {
         cpu = 50
-        memory = 200
+        memory = 50
       }
 
       service {
@@ -96,7 +95,7 @@ job "email-android7" {
 
       resources {
         cpu = 50
-        memory = 200
+        memory = 50
       }
 
       service {

cluster/prod/app/email/deploy/email.hcl

@@ -1,5 +1,4 @@
 job "email" {
-  # Should not run on the same site as email-android7.hcl (port conflict in diplonat)
   datacenters = ["scorpio"]
   type = "service"
   priority = 65
@@ -382,29 +381,6 @@ job "email" {
         destination = "secrets/postfix/transport"
       }
 
-      template {
-        # Collect machine IPs from the cluster.
-        # We use intermediate maps to ensure we get a sorted list with no duplicates,
-        # so that it is robust wrt. changes in the order of the output of ls or
-        # addition of new machines in an existing site.
-        # (scratch.MapValues returns the list of *values* in the map, sorted by *key*)
-        data = <<EOH
-        {{- range ls "diplonat/autodiscovery/ipv4" }}
-          {{- with $a := .Value | parseJSON }}
-            {{- scratch.MapSet "ipv4" $a.address $a.address }}
-          {{- end }}
-        {{- end -}}
-        {{- range ls "diplonat/autodiscovery/ipv6" }}
-          {{- with $a := .Value | parseJSON }}
-            {{- scratch.MapSet "ipv6" $a.address $a.address }}
-          {{- end }}
-        {{- end -}}
-        {{- range scratch.MapValues "ipv4" }}{{ . }} {{ end }}
-        {{- range scratch.MapValues "ipv6" }}[{{ . }}] {{ end }}
-        EOH
-        destination = "secrets/postfix/rate-limit-exceptions"
-      }
-
       # --- secrets ---
       template {
         data = "{{ with $d := key \"tricot/certs/smtp.deuxfleurs.fr\" | parseJSON }}{{ $d.cert_pem }}{{ end }}"

cluster/prod/app/garage/deploy/garage.hcl

@@ -1,5 +1,5 @@
 job "garage" {
-  datacenters = ["neptune", "bespin", "scorpio", "corrin"]
+  datacenters = [ "neptune", "bespin", "scorpio" ]
   type = "system"
   priority = 80
 
@@ -26,7 +26,7 @@ job "garage" {
     task "server" {
       driver = "docker"
       config {
-        image = "superboum/garage:v1.0.0-rc1-hotfix-red-ftr-wquorum"
+        image = "dxflrs/garage:v1.0.0-rc1"
         command = "/garage"
         args = [ "server" ]
         network_mode = "host"
@@ -80,9 +80,9 @@ job "garage" {
       #### Configuration for service ports: admin port (internal use only)
 
       service {
-        name = "garage-admin"
         port = "admin"
         address_mode = "host"
+        name = "garage-admin"
         # Check that Garage is alive and answering TCP connections
         check {
           type = "tcp"
@@ -96,19 +96,18 @@ job "garage" {
         }
       }
 
-      #### Configuration for service ports: externally available ports (S3 API, K2V, web)
+      #### Configuration for service ports: externally available ports (API, web)
 
       service {
-        name = "garage-api"
         tags = [
           "garage_api",
           "tricot garage.deuxfleurs.fr",
           "tricot *.garage.deuxfleurs.fr",
-          "tricot-on-demand-tls-ask http://garage-admin.service.prod.consul:3903/check",
           "tricot-site-lb",
         ]
         port = "s3"
         address_mode = "host"
+        name = "garage-api"
         # Check 1: Garage is alive and answering TCP connections
         check {
           name = "garage-api-live"
@@ -133,39 +132,6 @@ job "garage" {
       }
 
       service {
-        name = "garage-k2v"
-        tags = [
-          "garage_k2v",
-          "tricot k2v.deuxfleurs.fr",
-          "tricot-site-lb",
-        ]
-        port = "k2v"
-        address_mode = "host"
-        # Check 1: Garage is alive and answering TCP connections
-        check {
-          name = "garage-k2v-live"
-          type = "tcp"
-          interval = "60s"
-          timeout = "5s"
-          check_restart {
-            limit = 3
-            grace = "90s"
-            ignore_warnings = false
-          }
-        }
-        # Check 2: Garage is in a healthy state and requests should be routed here
-        check {
-          name = "garage-k2v-healthy"
-          port = "admin"
-          type = "http"
-          path = "/health"
-          interval = "60s"
-          timeout = "5s"
-        }
-      }
-
-      service {
-        name = "garage-web"
         tags = [
             "garage-web",
             "tricot * 1",
@@ -178,6 +144,7 @@ job "garage" {
         ]
         port = "web"
         address_mode = "host"
+        name = "garage-web"
         # Check 1: Garage is alive and answering TCP connections
         check {
           name = "garage-web-live"
@@ -216,6 +183,39 @@ job "garage" {
         port = "web"
         on_update = "ignore"
       }
+          
+
+      service {
+        tags = [
+          "garage_k2v",
+          "tricot k2v.deuxfleurs.fr",
+          "tricot-site-lb",
+        ]
+        port = "k2v"
+        address_mode = "host"
+        name = "garage-k2v"
+        # Check 1: Garage is alive and answering TCP connections
+        check {
+          name = "garage-k2v-live"
+          type = "tcp"
+          interval = "60s"
+          timeout = "5s"
+          check_restart {
+            limit = 3
+            grace = "90s"
+            ignore_warnings = false
+          }
+        }
+        # Check 2: Garage is in a healthy state and requests should be routed here
+        check {
+          name = "garage-k2v-healthy"
+          port = "admin"
+          type = "http"
+          path = "/health"
+          interval = "60s"
+          timeout = "5s"
+        }
+      }
     }
   }
 }

cluster/prod/app/guichet/deploy/directory.hcl

@@ -1,5 +1,5 @@
 job "guichet" {
-  datacenters = ["neptune", "jupiter", "corrin", "bespin"]
+  datacenters = [ "neptune", "scorpio" ]
   type = "service"
   priority = 90
 
@@ -35,8 +35,8 @@ job "guichet" {
         name = "guichet"
         tags = [
           "guichet",
-          "tricot guichet.staging.deuxfleurs.org",
+          "tricot guichet.deuxfleurs.fr",
-          "d53-cname guichet.staging.deuxfleurs.org",
+          "d53-cname guichet.deuxfleurs.fr",
         ]
         port = "web_port"
         address_mode = "host"

cluster/prod/app/guichet/deploy/guichet.hcl

@@ -1,62 +0,0 @@
-job "guichet" {
-  datacenters = ["corrin", "neptune", "scorpio"]
-  type = "service"
-  priority = 90
-
-  group "guichet" {
-    count = 1
-
-    network {
-      port "web_port" { to = 9991 }
-    }
-
-    task "guichet" {
-      driver = "docker"
-      config {
-        image = "dxflrs/guichet:0x4y7bj1qb8w8hckvpbzlgyxh63j66ij"
-        args = [ "server", "-config", "/etc/config.json" ]
-        readonly_rootfs = true
-        ports = [ "web_port" ]
-        volumes = [
-          "secrets/config.json:/etc/config.json"
-        ]
-      }
-
-      template {
-        data = file("../config/guichet/config.json.tpl")
-        destination = "secrets/config.json"
-      }
-
-      resources {
-        # limite de mémoire un peu élevée par précaution.
-        # avec 200M, j'ai observé guichet se faire OOM-killed au moment
-        # où un nouvel utilisateur clique sur un lien d'invitation
-        # fraichement généré.
-        memory = 300
-      }
-
-      service {
-        name = "guichet"
-        tags = [
-          "guichet",
-          "tricot guichet.deuxfleurs.fr",
-          "d53-cname guichet.deuxfleurs.fr",
-        ]
-        port = "web_port"
-        address_mode = "host"
-        check {
-          type = "tcp"
-          port = "web_port"
-          interval = "60s"
-          timeout = "5s"
-          check_restart {
-            limit = 3
-            grace = "90s"
-            ignore_warnings = false
-          }
-        }
-      }
-    }
-  }
-}
-

cluster/prod/app/jitsi/build/docker-compose.yml

@@ -6,17 +6,16 @@ services:
       context: ./jitsi-meet
       args:
         # https://github.com/jitsi/jitsi-meet
-        MEET_TAG: stable/jitsi-meet_9646
+        MEET_TAG: stable/jitsi-meet_8252
-        NODE_MAJOR_VERSION: 22
+    image: superboum/amd64_jitsi_meet:v6
-    image: superboum/amd64_jitsi_meet:v7
 
   jitsi-conference-focus:
     build:
       context: ./jitsi-conference-focus
       args:
         # https://github.com/jitsi/jicofo
-        JICOFO_TAG: stable/jitsi-meet_9646
+        JICOFO_TAG: stable/jitsi-meet_8252
-    image: superboum/amd64_jitsi_conference_focus:v11
+    image: superboum/amd64_jitsi_conference_focus:v10
 
   jitsi-videobridge:
     build:
@@ -24,13 +23,13 @@ services:
       args:
         # https://github.com/jitsi/jitsi-videobridge
         # note: JVB is not tagged with non-stable tags
-        JVB_TAG: stable/jitsi-meet_9646
+        JVB_TAG: stable/jitsi-meet_8252
-    image: superboum/amd64_jitsi_videobridge:v22
+    image: superboum/amd64_jitsi_videobridge:v21
 
   jitsi-xmpp:
     build:
       context: ./jitsi-xmpp
       args:
-        MEET_TAG: stable/jitsi-meet_9646
+        MEET_TAG: stable/jitsi-meet_8252
-        PROSODY_VERSION: 0.12.3-1
+        PROSODY_VERSION: 1nightly191-1~bookworm
-    image: superboum/amd64_jitsi_xmpp:v12
+    image: superboum/amd64_jitsi_xmpp:v11

cluster/prod/app/jitsi/build/jitsi-meet/Dockerfile

@@ -1,9 +1,8 @@
 FROM debian:bookworm AS builder
 
-ARG NODE_MAJOR_VERSION
 RUN apt-get update && \
     apt-get install -y curl && \
-    curl -sL https://deb.nodesource.com/setup_${NODE_MAJOR_VERSION}.x | bash - && \
+    curl -sL https://deb.nodesource.com/setup_19.x | bash - && \
     apt-get install -y git nodejs make git unzip
 
 ARG MEET_TAG

cluster/prod/app/jitsi/build/jitsi-videobridge/jvb_run

@@ -6,7 +6,7 @@ if [ -z "${JITSI_NAT_LOCAL_IP}" ]; then
 fi
 
 if [ -z "${JITSI_NAT_PUBLIC_IP}" ]; then
-  JITSI_NAT_PUBLIC_IP=$(curl -4 https://ifconfig.me)
+  JITSI_NAT_PUBLIC_IP=$(curl https://ifconfig.me)
 fi
 
 echo "NAT config: ${JITSI_NAT_LOCAL_IP} -> ${JITSI_NAT_PUBLIC_IP}"

cluster/prod/app/jitsi/build/jitsi-xmpp/Dockerfile

@@ -13,8 +13,8 @@ RUN apt-get update && \
     apt-get install -y wget gnupg2 extrepo && \
     extrepo enable prosody && \
     apt-get update && \
-    apt-cache show prosody && \
+    apt-cache show prosody-0.12 && \
-    apt-get install -y prosody=${PROSODY_VERSION} lua-event
+    apt-get install -y prosody-0.12=${PROSODY_VERSION} lua-event
 
 RUN mkdir -p /usr/local/share/ca-certificates/ && \
     ln -sf \

cluster/prod/app/jitsi/config/nginx.conf

@@ -81,12 +81,6 @@ http {
       alias /srv/jitsi-meet/$1/$2;
     }
 
-    # Disallow robots indexation 
-    location = /robots.txt {
-      add_header  Content-Type  text/plain;
-      return 200 "User-agent: *\nDisallow: /\n";
-    }
-
     # not used yet VVV
     # colibri (JVB) websockets
     #location ~ ^/colibri-ws/([a-zA-Z0-9-\.]+)/(.*) {
@@ -98,12 +92,12 @@ http {
     #}
 
 
-    location ~* {{ key "secrets/jitsi/blacklist_regex" }} {
+    location ~ "2daut2wank2|2duat2wank|2duat2wank0|2duat2wank1|2duat2wank2|2duat2wank3|2duatr2wank|2duatr2wank0|2duatr2wank1|2duatr2wank2|2wank2daut2|daut1|duat2wank|duat2wank2|duatr2wank2|prettypanties|slutgfs|wabk2daugther|wank2daugther|wank2daut|wank2daut2|wank2daut3|wankwatch" {
       return 302 https://www.service-public.fr/particuliers/vosdroits/R17674; 
     }
 
     location = /http-bind {
-	if ($args ~* {{ key "secrets/jitsi/blacklist_regex" }}) {
+	if ($args ~ "2daut2wank2|2duat2wank|2duat2wank0|2duat2wank1|2duat2wank2|2duat2wank3|2duatr2wank|2duatr2wank0|2duatr2wank1|2duatr2wank2|2wank2daut2|daut1|duat2wank|duat2wank2|duatr2wank2|prettypanties|slutgfs|wabk2daugther|wank2daugther|wank2daut|wank2daut2|wank2daut3|wankwatch") {
 	    return 403 'forbidden';
 	}
 

cluster/prod/app/jitsi/config/videobridge.conf

@@ -115,8 +115,7 @@ videobridge {
     # (e.g. health or debug stats)
     private {
       # See JettyBundleActivatorConfig in Jicoco for values
-      host = 0.0.0.0
+      host = 127.0.0.1
-      port = {{ env "NOMAD_PORT_management_port" }}
     }
   }
   octo {

cluster/prod/app/jitsi/deploy/jitsi.hcl

@@ -1,5 +1,5 @@
 job "jitsi" {
-  datacenters = ["neptune", "scorpio", "corrin"]
+  datacenters = ["neptune", "scorpio"]
   type = "service"
 
   priority = 50
@@ -20,7 +20,7 @@ job "jitsi" {
     task "xmpp" {
       driver = "docker"
       config {
-        image = "superboum/amd64_jitsi_xmpp:v12"
+        image = "superboum/amd64_jitsi_xmpp:v11"
         ports = [ "bosh_port", "xmpp_port" ]
         network_mode = "host"
         volumes = [
@@ -101,7 +101,7 @@ EOF
     task "front" {
       driver = "docker"
       config {
-        image = "superboum/amd64_jitsi_meet:v7"
+        image = "superboum/amd64_jitsi_meet:v6"
         network_mode = "host"
         ports = [ "https_port" ]
         volumes = [
@@ -168,7 +168,7 @@ EOF
     task "jicofo" {
       driver = "docker"
       config {
-        image = "superboum/amd64_jitsi_conference_focus:v11"
+        image = "superboum/amd64_jitsi_conference_focus:v10"
         network_mode = "host"
         volumes = [
           "secrets/certs/jitsi.crt:/usr/local/share/ca-certificates/jitsi.crt",
@@ -203,15 +203,14 @@ EOF
   group "data_plane" {
     network {
       port "video_port" { static = 8080 }
-      port "management_port" { static = 8000 }
     }
 
     task "videobridge" {
       driver = "docker"
       config {
-        image = "superboum/amd64_jitsi_videobridge:v22"
+        image = "superboum/amd64_jitsi_videobridge:v21"
         network_mode = "host"
-        ports = [ "video_port", "management_port" ] 
+        ports = [ "video_port" ] 
         ulimit {
           nofile = "1048576:1048576"
           nproc = "65536:65536"
@@ -223,14 +222,11 @@ EOF
         ]
       }
 
-      template {
+      env {
-         data = <<EOH
+        # Our container can autodetect the public IP with the ifconfig.me service
-	 {{ with $a := env "attr.unique.hostname" | printf "diplonat/autodiscovery/ipv4/%s" | key | parseJSON }}
+        # However we would like to avoid relying on a 3rd party service for production use
-         JITSI_NAT_PUBLIC_IP = {{ $a.address }}
+        # That's why I am setting the public IP address statically here VVVV
-	 {{ end }}
+        JITSI_NAT_PUBLIC_IP = "${meta.public_ipv4}"
-	 EOH
-	 destination = "secrets/jitsi-videobridge.env"
-	 env         = true
       }
 
       template {
@@ -260,16 +256,9 @@ EOF
         port = "video_port"
         address_mode = "host"
         name = "video-jitsi"
-      }
-
-      service {
-        tags = [ "jitsi" ]
-        port = "management_port"
-        address_mode = "host"
-        name = "management-video-jitsi"
         check {
           type = "tcp"
-          port = "management_port"
+          port = "video_port"
           interval = "60s"
           timeout = "5s"
         }

cluster/prod/app/jitsi/integration/README.md

@@ -52,7 +52,7 @@ But maybe this value is deprecated: the check is still here but it is not used a
 start a maintainance container
 
 ```
-docker run --rm -it -v `pwd`/prosody/certs/:/var/lib/prosody/ -v `pwd`/prosody/prosody.cfg.lua:/etc/prosody/prosody.cfg.lua:ro --user root superboum/amd64_jitsi_xmpp:v12 bash
+docker run --rm -it -v `pwd`/prosody/certs/:/var/lib/prosody/ -v `pwd`/prosody/prosody.cfg.lua:/etc/prosody/prosody.cfg.lua:ro --user root superboum/amd64_jitsi_xmpp:v11 bash
 ```
 
 then generate certificates from inside this container

cluster/prod/app/jitsi/integration/docker-compose.yml

@@ -1,7 +1,7 @@
 version: '3.4'
 services:
   jitsi-xmpp:
-    image: superboum/amd64_jitsi_xmpp:v12
+    image: superboum/amd64_jitsi_xmpp:v11
     volumes:
       - "./prosody/prosody.cfg.lua:/etc/prosody/prosody.cfg.lua:ro"
       - "./prosody/certs/jitsi.crt:/var/lib/prosody/jitsi.crt:ro"
@@ -11,19 +11,16 @@ services:
     environment:
       - JICOFO_AUTH_PASSWORD=jicofopass
       - JVB_AUTH_PASSWORD=jvbpass
-    ports:
-      - "5222:5222/tcp"
  
   jitsi-conference-focus:
-    image: superboum/amd64_jitsi_conference_focus:v11
+    image: superboum/amd64_jitsi_conference_focus:v10
     volumes:
       - "./prosody/certs/jitsi.crt:/usr/local/share/ca-certificates/jitsi.crt:ro"
       - "./prosody/certs/auth.jitsi.crt:/usr/local/share/ca-certificates/auth.jitsi.crt:ro"
       - "./jicofo/jicofo.conf:/etc/jitsi/jicofo.conf:ro"
 
   jitsi-videobridge:
-    image: superboum/amd64_jitsi_videobridge:v22
+    image: superboum/amd64_jitsi_videobridge:v21
-    network_mode: "host"
     volumes:
       - "./prosody/certs/jitsi.crt:/usr/local/share/ca-certificates/jitsi.crt:ro"
       - "./prosody/certs/auth.jitsi.crt:/usr/local/share/ca-certificates/auth.jitsi.crt:ro"
@@ -34,7 +31,7 @@ services:
       - "10000:10000/udp"
 
   jitsi-meet:
-    image: superboum/amd64_jitsi_meet:v7
+    image: superboum/amd64_jitsi_meet:v6
     volumes:
       - "./prosody/certs/jitsi.crt:/etc/nginx/jitsi.crt:ro"
       - "./prosody/certs/jitsi.key:/etc/nginx/jitsi.key:ro"

cluster/prod/app/jitsi/integration/jvb/videobridge.conf

@@ -62,7 +62,7 @@ videobridge {
 
       configs {
         unique-xmpp-server {
-          hostname="172.17.0.1"
+          hostname="jitsi-xmpp"
           domain = "auth.jitsi"
           username = "jvb"
           password = "jvbpass"

cluster/prod/app/jitsi/integration/meet/config.js

@@ -22,7 +22,7 @@ var config = {
     },
 
     // BOSH URL. FIXME: use XEP-0156 to discover it.
-    bosh: '//[2a0c:e303:0:2a00::de6]/http-bind',
+    bosh: '//192.168.1.143/http-bind',
 
     // Websocket URL
     // websocket: 'wss://jitsi-meet.example.com/xmpp-websocket',

cluster/prod/app/matrix/README.md

@@ -1,14 +0,0 @@
-# Informations relatives à la config Matrix
-
-## Ressources
-
-- La doc de Synapse est là : https://element-hq.github.io/synapse/latest/welcome_and_overview.html
-
-### Métriques 
-
-- La page pour configurer les metrics : https://element-hq.github.io/synapse/latest/usage/configuration/config_documentation.html?highlight=metrics#metrics
-- La page pour le tutoriel sur configurer les metrics avec Prometheus : https://element-hq.github.io/synapse/latest/metrics-howto.html?highlight=metrics#how-to-monitor-synapse-metrics-using-prometheus
-
----
-
-> Avec Nix on n'aurait pas tous ces problèmes.

cluster/prod/app/matrix/build/docker-compose.yml

@@ -6,18 +6,18 @@ services:
       context: ./riotweb
       args:
         # https://github.com/vector-im/element-web/releases
-        VERSION: v1.11.78
+        VERSION: 1.11.49
-    image: particallydone/amd64_elementweb:v36
+    image: lxpz/amd64_elementweb:v35
 
   synapse:
     build:
       context: ./matrix-synapse
       args:
         # https://github.com/matrix-org/synapse/releases
-        VERSION: v1.104.0
+        VERSION: 1.95.1
         # https://github.com/matrix-org/synapse-s3-storage-provider/commits/main
         # Update with the latest commit on main each time you update the synapse version
         # otherwise synapse may fail to launch due to incompatibility issues
         # see this issue for an example: https://github.com/matrix-org/synapse-s3-storage-provider/issues/64
-        S3_VERSION: 2c46a764f700e6439afa11c00db827ddf21a9e89
+        S3_VERSION: v1.2.1
-    image: particallydone/amd64_synapse:v60
+    image: lxpz/amd64_synapse:v58

cluster/prod/app/matrix/build/matrix-synapse/Dockerfile

@@ -1,4 +1,4 @@
-FROM amd64/debian:trixie AS builder
+FROM amd64/debian:bookworm as builder
 
 ARG VERSION
 ARG S3_VERSION
@@ -22,25 +22,21 @@ RUN apt-get update && \
       libpq-dev \
       virtualenv \
       libxslt1-dev \
-      git
+      git && \
-
+    virtualenv /root/matrix-env -p /usr/bin/python3 && \
-RUN virtualenv /root/matrix-env -p /usr/bin/python3 && \
     . /root/matrix-env/bin/activate && \
     pip3 install \
-      https://github.com/element-hq/synapse/archive/${VERSION}.tar.gz#egg=matrix-synapse[matrix-synapse-ldap3,postgres,resources.consent,saml2,url_preview] && \
+      https://github.com/matrix-org/synapse/archive/v${VERSION}.tar.gz#egg=matrix-synapse[matrix-synapse-ldap3,postgres,resources.consent,saml2,url_preview] && \
     pip3 install \
       git+https://github.com/matrix-org/synapse-s3-storage-provider.git@${S3_VERSION}
 
-# WARNING: trixie n'est pas une LTS
+FROM amd64/debian:bookworm
-# mais on est obligé d'avoir la même version que le builder
-# et le builder veut une version de rustc qui n'est pas dans bookworm (dernière LTS at the time of writing)
-FROM amd64/debian:trixie
 
 RUN apt-get update && \
     apt-get -qq -y full-upgrade && \
     apt-get install -y \
       python3 \
-      python3-setuptools \
+      python3-distutils \
       libffi8 \
       libjpeg62-turbo \
       libssl3 \

cluster/prod/app/matrix/build/riotweb/Dockerfile

@@ -1,16 +1,13 @@
-FROM amd64/debian:trixie as builder
+FROM amd64/debian:buster as builder
 
 ARG VERSION
 WORKDIR /root
 
 RUN apt-get update && \
-    apt-get install -y wget
+    apt-get install -y wget && \
+    wget https://github.com/vector-im/element-web/releases/download/v${VERSION}/element-v${VERSION}.tar.gz && \
+    tar xf element-v${VERSION}.tar.gz && \
+    mv element-v${VERSION}/ riot/
 
-RUN wget https://github.com/element-hq/element-web/releases/download/${VERSION}/element-${VERSION}.tar.gz && \
-    tar xf element-${VERSION}.tar.gz && \
-    mv element-${VERSION}/ riot/
-
-# Le conteneur de superboum contient uniquement un serveur web de 5 lignes.
-# Ca vous ennuie ? On peut publier Riot dans un bucket web Garage, tkt, ça sera Tricot qui servira.
 FROM superboum/amd64_webserver:v3
 COPY --from=builder /root/riot /srv/http

cluster/prod/app/matrix/deploy/im.hcl

@@ -15,7 +15,7 @@ job "matrix" {
       driver = "docker"
 
       config {
-        image = "particallydone/amd64_synapse:v60"
+        image = "lxpz/amd64_synapse:v58"
         network_mode = "host"
         readonly_rootfs = true
         ports = [ "api_port" ]
@@ -101,7 +101,7 @@ job "matrix" {
       driver = "docker"
 
       config {
-        image = "particallydone/amd64_synapse:v60"
+        image = "lxpz/amd64_synapse:v58"
         readonly_rootfs = true
         command = "/usr/local/bin/matrix-s3-async"
         work_dir = "/tmp"
@@ -137,7 +137,7 @@ EOH
     task "riotweb" {
       driver = "docker"
       config {
-        image = "particallydone/amd64_elementweb:v36"
+        image = "lxpz/amd64_elementweb:v35"
         ports = [ "web_port" ]
         volumes = [
           "secrets/config.json:/srv/http/config.json"
@@ -190,7 +190,7 @@ EOH
       driver = "docker"
 
       config {
-        image = "ghcr.io/matrix-org/sliding-sync:v0.99.16"
+        image = "ghcr.io/matrix-org/sliding-sync:v0.99.12"
         ports = [ "syncv3_api", "syncv3_metrics" ]
       }
 

cluster/prod/app/plume/deploy/plume.hcl

@@ -1,5 +1,5 @@
 job "plume-blog" {
-  datacenters = ["corrin", "neptune", "scorpio"]
+  datacenters = ["scorpio", "neptune"]
   type = "service"
 
   group "plume" {

cluster/prod/app/postgres/deploy/postgres.hcl

@@ -1,5 +1,5 @@
 job "postgres14" {
-  datacenters = ["neptune", "bespin", "scorpio", "corrin"]
+  datacenters = ["neptune", "bespin", "scorpio"]
   type = "system"
   priority = 90
 
@@ -19,7 +19,8 @@ job "postgres14" {
     constraint {
       attribute = "${attr.unique.hostname}"
       operator = "set_contains_any"
-      value = "courgette,df-ymf,abricot,pasteque"
+      value = "courgette,df-ymf,abricot"
+	  # old (orion) = diplotaxis
     }
 
     restart {

cluster/prod/app/telemetry/config/prometheus.yml

@@ -26,16 +26,6 @@ scrape_configs:
         cert_file: /etc/prometheus/consul-client.crt
         key_file: /etc/prometheus/consul-client.key
 
-  - job_name: 'jitsi-videobridge'
-    consul_sd_configs:
-    - server: 'https://localhost:8501'
-      services:
-        - 'management-video-jitsi'
-      tls_config:
-        ca_file: /etc/prometheus/consul-ca.crt
-        cert_file: /etc/prometheus/consul-client.crt
-        key_file: /etc/prometheus/consul-client.key
-
   - job_name: 'garage'
     authorization:
       type: Bearer

cluster/prod/app/telemetry/deploy/telemetry-service.hcl

@@ -1,5 +1,5 @@
 job "telemetry-service" {
-  datacenters = ["corrin", "scorpio"]
+  datacenters = ["neptune", "scorpio"]
   type = "service"
 
   group "grafana" {

cluster/prod/app/telemetry/deploy/telemetry-storage.hcl

@@ -1,5 +1,5 @@
 job "telemetry-storage" {
-  datacenters = ["scorpio", "bespin"]
+  datacenters = ["neptune", "bespin"]
   type = "service"
 
   group "prometheus" {
@@ -14,13 +14,13 @@ job "telemetry-storage" {
     constraint {
       attribute = "${attr.unique.hostname}"
       operator = "set_contains_any"
-      value = "ananas,df-ymk"
+      value = "celeri,df-ymk"
     }
 
     task "prometheus" {
       driver = "docker"
       config {
-        image = "prom/prometheus:v2.50.1"
+        image = "prom/prometheus:v2.46.0"
         network_mode = "host"
         ports = [ "prometheus" ]
         args = [

cluster/prod/app/telemetry/deploy/telemetry-system.hcl

@@ -1,5 +1,5 @@
 job "telemetry-system" {
-	datacenters = ["neptune", "scorpio", "bespin", "corrin"]
+	datacenters = ["neptune", "scorpio", "bespin"]
 	type = "system"
 	priority = "100"
 
@@ -12,7 +12,7 @@ job "telemetry-system" {
 			driver = "docker"
 
 			config {
-				image = "quay.io/prometheus/node-exporter:v1.7.0"
+				image = "quay.io/prometheus/node-exporter:v1.6.1"
 				network_mode = "host"
 				volumes = [
 					"/:/host:ro,rslave"

cluster/prod/app/woodpecker-ci/deploy/server.hcl

@@ -1,5 +1,7 @@
 job "woodpecker-ci" {
-  datacenters = ["neptune", "scorpio"]
+  # prefer scorpio as neptune has bad ipv6 routes to git.deuxfleurs.fr
+  # and bad networking makes woodpecker fail to run builds
+  datacenters = [/*"neptune",*/ "scorpio"]
   type = "service"
 
   group "server" {
@@ -23,7 +25,7 @@ job "woodpecker-ci" {
     task "server" {
       driver = "docker"
       config {
-        image = "woodpeckerci/woodpecker-server:v2.7.1"
+        image = "woodpeckerci/woodpecker-server:v2.3.0"
         ports = [ "web_port", "grpc_port" ]
         network_mode = "host"
       }
@@ -31,7 +33,7 @@ job "woodpecker-ci" {
       template {
         data = <<EOH
 WOODPECKER_OPEN=true
-WOODPECKER_ORGS=Deuxfleurs,distorsion
+WOODPECKER_ORGS=Deuxfleurs
 WOODPECKER_ADMIN=lx
 
 WOODPECKER_HOST=https://woodpecker.deuxfleurs.fr
@@ -121,7 +123,6 @@ http {
     listen [::]:14453 ssl;
     http2 on;
     server_name woodpecker.deuxfleurs.fr;
-    resolver 127.0.0.1 valid=30s;
 
     ssl_certificate "/etc/ssl/certs/woodpecker.cert";
     ssl_certificate_key "/etc/ssl/certs/woodpecker.key";

cluster/prod/app/woodpecker-ci/integration/README.md

@@ -38,8 +38,8 @@ apt-get install docker-ce docker-ce-cli containerd.io docker-buildx-plugin docke
 ## Install the runner
 
 ```bash
-wget https://git.deuxfleurs.fr/Deuxfleurs/nixcfg/raw/branch/main/cluster/prod/app/woodpecker-ci/integration/nix.conf
+wget https://git.deuxfleurs.fr/Deuxfleurs/infrastructure/raw/branch/main/app/woodpecker-ci/integration/nix.conf
-wget https://git.deuxfleurs.fr/Deuxfleurs/nixcfg/raw/branch/main/cluster/prod/app/woodpecker-ci/integration/docker-compose.yml
+wget https://git.deuxfleurs.fr/Deuxfleurs/infrastructure/raw/branch/main/app/woodpecker-ci/integration/docker-compose.yml
 ```
 
 Create a new Agent for your runner in the Woodpecker admin, and copy the agent secret value.

cluster/prod/app/woodpecker-ci/integration/docker-compose.yml

@@ -10,7 +10,7 @@ services:
       - "./nix.conf:/etc/nix/nix.conf:ro"
 
   woodpecker-runner:
-    image: woodpeckerci/woodpecker-agent:v2.4.1
+    image: woodpeckerci/woodpecker-agent:v2.3.0
     restart: always
     environment:
       # -- change these for each agent

cluster/prod/cluster.nix

@@ -11,37 +11,55 @@
       siteName = "neptune";
       publicKey = "VvXT0fPDfWsHxumZqVShpS33dJQAdpJ1E79ZbCBJP34=";
       address = "10.83.1.1";
-      endpoint = "82.67.87.112:33731";
+      endpoint = "77.207.15.215:33731";
     };
     "courgette" = {
       siteName = "neptune";
       publicKey = "goTkBJGmzrGDOAjUcdH9G0JekipqSMoaYQdB6IHnzi0=";
       address = "10.83.1.2";
-      endpoint = "82.67.87.112:33732";
+      endpoint = "77.207.15.215:33732";
     };
     "celeri" = {
       siteName = "neptune";
       publicKey = "oZDAb8LoLW87ktUHyFFec0VaIar97bqq47mGbdVqJ0U=";
       address = "10.83.1.3";
-      endpoint = "82.67.87.112:33733";
+      endpoint = "77.207.15.215:33733";
+    };
+    "dahlia" = {
+      siteName = "orion";
+      publicKey = "EtRoWBYCdjqgXX0L+uWLg8KxNfIK8k9OTh30tL19bXU=";
+      address = "10.83.2.1";
+      endpoint = "82.66.80.201:33731";
+    };
+    "diplotaxis" = {
+      siteName = "orion";
+      publicKey = "HbLC938mysadMSOxWgq8+qrv+dBKzPP/43OMJp/3phA=";
+      address = "10.83.2.2";
+      endpoint = "82.66.80.201:33732";
+    };
+    "doradille" = {
+      siteName = "orion";
+      publicKey = "e1C8jgTj9eD20ywG08G1FQZ+Js3wMK/msDUE1wO3l1Y=";
+      address = "10.83.2.3";
+      endpoint = "82.66.80.201:33733";
     };
     "df-ykl" = {
       siteName = "bespin";
       publicKey = "bIjxey/VhBgVrLa0FxN/KISOt2XFmQeSh1MPivUq9gg=";
       address = "10.83.3.1";
-      endpoint = "109.130.116.21:33731";
+      endpoint = "109.136.55.235:33731";
     };
     "df-ymf" = {
       siteName = "bespin";
       publicKey = "pUIKv8UBl586O7DBrHBsb9BgNU7WlYQ2r2RSNkD+JAQ=";
       address = "10.83.3.2";
-      endpoint = "109.130.116.21:33732";
+      endpoint = "109.136.55.235:33732";
     };
     "df-ymk" = {
       siteName = "bespin";
       publicKey = "VBmpo15iIJP7250NAsF+ryhZc3j+8TZFnE1Djvn5TXI=";
       address = "10.83.3.3";
-      endpoint = "109.130.116.21:33733";
+      endpoint = "109.136.55.235:33733";
     };
     "abricot" = {
       siteName = "scorpio";
@@ -55,58 +73,20 @@
       address = "10.83.4.2";
       endpoint = "82.65.41.110:33742";
     };
-    "onion" = {
-      siteName = "dathomir";
-      publicKey = "gpeqalqAUaYlMuebv3glQeZyE64+OpkyIHFhfStJQA4=";
-      address = "10.83.5.1";
-      endpoint = "82.64.238.84:33740";
   };
-    "oseille" = {
-      siteName = "dathomir";
-      publicKey = "T87GzAQt02i00iOMbEm7McA/VL9OBrG/kCrgoNh5MmY=";
-      address = "10.83.5.2";
-      endpoint = "82.64.238.84:33741";
-    };
-    "io" = {
-      siteName = "dathomir";
-      publicKey = "3+VvWJtABOAd6zUCMROhqGbNtkQRtoIkVmYn0M81jQw=";
-      address = "10.83.5.3";
-      endpoint = "82.64.238.84:33742";
-    };
-    "ortie" = {
-      siteName = "dathomir";
-      publicKey = "tbx2mvt3TN3Xd+ermwwZ6it80VWT5949cKH9BRFgvzE=";
-      address = "10.83.5.4";
-      endpoint = "82.64.238.84:33743";
-    };
-    "pamplemousse" = {
-      siteName = "corrin";
-      publicKey = "6y5GrNXEql12AObuSfOHGxxUKpdlcyapu+juLYOEBhc=";
-      address = "10.83.6.1";
-      endpoint = "45.81.62.36:33731";
-    };
-    "pasteque" = {
-      siteName = "corrin";
-      publicKey = "7vPq0z6JVxTLEebasUlR5Uu4dAFZxfddhjWtIYhCoXw=";
-      address = "10.83.6.2";
-      endpoint = "45.81.62.36:33732";
-    };
-  };
-
-  # Pin Nomad version
-  services.nomad.package = pkgs.nomad_1_6;
-  nixpkgs.config.allowUnfree = true; # Accept nomad's BSL license
 
   # Bootstrap IPs for Consul cluster,
   # these are IPs on the Wireguard overlay
   services.consul.extraConfig.retry_join = [
+    "10.83.1.1"  # concombre
+    "10.83.2.1"  # dahlia
     "10.83.3.1"  # df-ykl
-    "10.83.4.2"  # ananas
-    "10.83.6.1"  # pamplemousse
   ];
 
   deuxfleurs.adminAccounts = {
     lx = [
+      # Keys for accessing nodes from outside
+      "ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIJpaBZdYxHqMxhv2RExAOa7nkKhPBOHupMP3mYaZ73w9 lx@lindy"
       "ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIIw+IIX8+lZX9RrHAbwi/bncLYStXpI4EmK3AUcqPY2O lx@kusanagi "
     ];
     quentin = [

cluster/prod/known_hosts

@@ -9,9 +9,3 @@ concombre.machine.deuxfleurs.fr ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIL3N0QOFNGkC
 courgette.machine.deuxfleurs.fr ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIPCXJeo6yeQeTN7D7OZwLd8zbyU1jWywlhQ29yyk7x+G
 abricot.machine.deuxfleurs.fr ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIPhHUQtc5lukPMFkiWf/sTgaUpwNFXHCJoQKu4ooRFy+
 ananas.machine.deuxfleurs.fr ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIHs0zAyBy70oyV56qaMaMAKR7VjEDnsm5LEyZJbM95BL
-onion.machine.deuxfleurs.fr ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAINjBQ67fxwuDDzRPveTko/Sgf0cev3tIvlr3CfAmhF0C
-oseille.machine.deuxfleurs.fr ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIAgQdQ5UVFFn+DXN90ut9+V7NtEopQJnES3r8soKTZW4
-io.machine.deuxfleurs.fr ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIIvgCJ7Jew7ou1RZuaT41Sd+ucZAgxUwtdieqNqoC3+T
-ortie.machine.deuxfleurs.fr ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIMqtfIPLk8a5tM6Upj7GQwlIS16nBPrZYVXE2FVlO2Yn
-pamplemousse.machine.deuxfleurs.fr ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIAI0M5qny9yQ6LNzWqPfSlOWwTYpvxQtuSpFiOb6aVtA
-2001:912:1ac0:2200::201 ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIAI0M5qny9yQ6LNzWqPfSlOWwTYpvxQtuSpFiOb6aVtA

cluster/prod/node/concombre.nix

@@ -11,4 +11,5 @@
   deuxfleurs.hostName = "concombre";
   deuxfleurs.staticIPv4.address = "192.168.1.31";
   deuxfleurs.staticIPv6.address = "2001:910:1204:1::31";
+  deuxfleurs.isRaftServer = true;
 }

cluster/prod/node/dahlia.nix

@@ -5,10 +5,9 @@
 {
   # Use the systemd-boot EFI boot loader.
   boot.loader.systemd-boot.enable = true;
-  boot.loader.timeout = 5;
   boot.loader.efi.canTouchEfiVariables = true;
 
-  deuxfleurs.hostName = "pasteque";
+  deuxfleurs.hostName = "dahlia";
-  deuxfleurs.staticIPv4.address = "192.168.5.202";
+  deuxfleurs.staticIPv4.address = "192.168.1.11";
-  deuxfleurs.staticIPv6.address = "2001:912:1ac0:2200::202";
+  deuxfleurs.staticIPv6.address = "2a01:e0a:28f:5e60::11";
 }

cluster/prod/node/dahlia.site.nix

@@ -0,0 +1 @@
+../site/orion.nix

cluster/prod/node/diplotaxis.nix

@@ -0,0 +1,14 @@
+# Configuration file local to this node
+
+{ config, pkgs, ... }:
+
+{
+  # Use the GRUB 2 boot loader.
+  boot.loader.grub.enable = true;
+  boot.loader.grub.version = 2;
+  boot.loader.grub.device = "/dev/nvme0n1"; # or "nodev" for efi only
+
+  deuxfleurs.hostName = "diplotaxis";
+  deuxfleurs.staticIPv4.address = "192.168.1.12";
+  deuxfleurs.staticIPv6.address = "2a01:e0a:28f:5e60::12";
+}

cluster/prod/node/diplotaxis.site.nix

@@ -0,0 +1 @@
+../site/orion.nix

cluster/prod/node/doradille.nix

@@ -0,0 +1,14 @@
+# Configuration file local to this node
+
+{ config, pkgs, ... }:
+
+{
+  # Use the GRUB 2 boot loader.
+  boot.loader.grub.enable = true;
+  boot.loader.grub.version = 2;
+  boot.loader.grub.device = "/dev/nvme0n1"; # or "nodev" for efi only
+
+  deuxfleurs.hostName = "doradille";
+  deuxfleurs.staticIPv4.address = "192.168.1.13";
+  deuxfleurs.staticIPv6.address = "2a01:e0a:28f:5e60::13";
+}

cluster/prod/node/doradille.site.nix

@@ -0,0 +1 @@
+../site/orion.nix

cluster/prod/node/io.nix

@@ -1,11 +0,0 @@
-{ ... }:
-{
-  boot.loader.grub.enable = true;
-  boot.loader.grub.device = "/dev/sda";
-
-  services.openssh.ports = [ 22 33603 ];
-
-  deuxfleurs.hostName = "io";
-  deuxfleurs.staticIPv4.address = "192.168.1.36";
-  deuxfleurs.staticIPv6.address = "2a01:e0a:5e4:1d0:52e5:49ff:fe5c:5f35";
-}

cluster/prod/node/io.site.nix

@@ -1 +0,0 @@
-../site/dathomir.nix

cluster/prod/node/onion.nix

@@ -1,12 +0,0 @@
-{ ... }:
-{
-  boot.loader.systemd-boot.enable = true;
-  boot.loader.timeout = 20;
-  boot.loader.efi.canTouchEfiVariables = true;
-
-  services.openssh.ports = [ 22 33601 ];
-
-  deuxfleurs.hostName = "onion";
-  deuxfleurs.staticIPv4.address = "192.168.1.34";
-  deuxfleurs.staticIPv6.address = "2a01:e0a:5e4:1d0:223:24ff:feb0:e866";
-}

cluster/prod/node/onion.site.nix

@@ -1 +0,0 @@
-../site/dathomir.nix

cluster/prod/node/ortie.nix

@@ -1,12 +0,0 @@
-{ ... }:
-{
-  boot.loader.systemd-boot.enable = true;
-  boot.loader.timeout = 20;
-  boot.loader.efi.canTouchEfiVariables = true;
-
-  services.openssh.ports = [ 22 33604 ];
-
-  deuxfleurs.hostName = "ortie";
-  deuxfleurs.staticIPv4.address = "192.168.1.37";
-  deuxfleurs.staticIPv6.address = "2a01:e0a:5e4:1d0:223:24ff:feb0:1b9";
-}

cluster/prod/node/ortie.site.nix

@@ -1 +0,0 @@
-../site/dathomir.nix

cluster/prod/node/oseille.nix

@@ -1,12 +0,0 @@
-{ ... }:
-{
-  boot.loader.systemd-boot.enable = true;
-  boot.loader.timeout = 20;
-  boot.loader.efi.canTouchEfiVariables = true;
-
-  services.openssh.ports = [ 22 33602 ];
-
-  deuxfleurs.hostName = "oseille";
-  deuxfleurs.staticIPv4.address = "192.168.1.35";
-  deuxfleurs.staticIPv6.address = "2a01:e0a:5e4:1d0:223:24ff:feaf:f90b";
-}

cluster/prod/node/oseille.site.nix

@@ -1 +0,0 @@
-../site/dathomir.nix

cluster/prod/node/pamplemousse.nix

@@ -1,15 +0,0 @@
-# Configuration file local to this node
-
-{ config, pkgs, ... }:
-
-{
-  # Use the systemd-boot EFI boot loader.
-  boot.loader.systemd-boot.enable = true;
-  boot.loader.timeout = 5;
-  boot.loader.efi.canTouchEfiVariables = true;
-
-  deuxfleurs.hostName = "pamplemousse";
-  deuxfleurs.staticIPv4.address = "192.168.5.201";
-  deuxfleurs.staticIPv6.address = "2001:912:1ac0:2200::201";
-  deuxfleurs.isRaftServer = true;
-}

cluster/prod/node/pamplemousse.site.nix

@@ -1 +0,0 @@
-../site/corrin.nix

cluster/prod/node/pasteque.site.nix

@@ -1 +0,0 @@
-../site/corrin.nix

cluster/prod/site/corrin.nix

@@ -1,8 +0,0 @@
-{ config, pkgs, ... }:
-
-{
-  deuxfleurs.siteName = "corrin";
-  deuxfleurs.staticIPv4.defaultGateway = "192.168.5.1";
-  deuxfleurs.cnameTarget = "corrin.site.deuxfleurs.fr.";
-  deuxfleurs.publicIPv4 = "45.81.62.36";
-}

cluster/prod/site/dathomir.nix

@@ -1,7 +0,0 @@
-{ ... }:
-{
-  deuxfleurs.siteName = "dathomir";
-  deuxfleurs.cnameTarget = "dathomir.site.deuxfleurs.fr";
-  deuxfleurs.publicIPv4 = "82.64.238.84";
-  deuxfleurs.staticIPv4.defaultGateway = "192.168.1.1";
-}

cluster/prod/site/neptune.nix

@@ -2,7 +2,7 @@
 
 {
   deuxfleurs.siteName = "neptune";
-  deuxfleurs.staticIPv4.defaultGateway = "192.168.1.254";
+  deuxfleurs.staticIPv4.defaultGateway = "192.168.1.1";
   deuxfleurs.cnameTarget = "neptune.site.deuxfleurs.fr.";
-  deuxfleurs.publicIPv4 = "82.67.87.112";
+  deuxfleurs.publicIPv4 = "77.207.15.215";
 }

cluster/prod/site/orion.nix

@@ -0,0 +1,8 @@
+{ config, pkgs, ... }:
+
+{
+  deuxfleurs.siteName = "orion";
+  deuxfleurs.staticIPv4.defaultGateway = "192.168.1.254";
+  deuxfleurs.cnameTarget = "orion.site.deuxfleurs.fr.";
+  deuxfleurs.publicIPv4 = "82.66.80.201";
+}

cluster/prod/ssh_config

@@ -33,20 +33,3 @@ Host abricot
 Host ananas
 	HostName ananas.machine.deuxfleurs.fr
 
-Host onion
-  HostName onion.machine.deuxfleurs.fr
-
-Host oseille
-  HostName oseille.machine.deuxfleurs.fr
-
-Host io
-  HostName io.machine.deuxfleurs.fr
-
-Host ortie
-  HostName ortie.machine.deuxfleurs.fr
-
-Host pamplemousse
-  HostName 2001:912:1ac0:2200::201
-
-Host pasteque
-  HostName 2001:912:1ac0:2200::202

cluster/staging/app/ci/deploy/albatros.hcl

@@ -1,5 +1,5 @@
 job "albatros" {
-  datacenters = ["neptune", "dathomir", "corrin", "bespin"]
+  datacenters = ["neptune", "jupiter", "corrin", "bespin"]
   type = "service"
   priority = 90
 

cluster/staging/app/ci/deploy/builder.hcl

@@ -2,7 +2,7 @@ job "builder" {
   namespace = "ci"
   type = "batch"
 
-  datacenters = ["neptune", "dathomir", "corrin", "bespin"]
+  datacenters = ["neptune", "jupiter", "corrin", "bespin"]
   priority = 100
 
   parameterized {

cluster/staging/app/core/deploy/bottin.hcl

@@ -1,100 +0,0 @@
-job "core-bottin" {
-  datacenters = ["neptune", "jupiter", "corrin", "bespin"]
-  type = "system"
-  priority = 90
-
-  update {
-    max_parallel = 1
-    stagger = "1m"
-  }
-
-  group "bottin" {
-    constraint {
-      distinct_property = "${meta.site}"
-      value = "1"
-    }
-
-    network {
-      port "ldap_port" {
-        static = 389
-        to = 389
-      }
-    }
-
-    task "bottin" {
-      driver = "docker"
-      config {
-        image = "dxflrs/bottin:7h18i30cckckaahv87d3c86pn4a7q41z"
-        network_mode = "host"
-        readonly_rootfs = true
-        ports = [ "ldap_port" ]
-        volumes = [
-          "secrets/config.json:/config.json",
-          "secrets:/etc/bottin",
-        ]
-      }
-
-      restart {
-        interval = "5m"
-        attempts = 10
-        delay    = "15s"
-        mode     = "delay"
-      }
-
-      resources {
-        memory = 100
-        memory_max = 200
-      }
-
-      template {
-        data = file("../config/bottin/config.json.tpl")
-        destination = "secrets/config.json"
-      }
-
-      template {
-        data = "{{ key \"secrets/consul/consul.crt\" }}"
-        destination = "secrets/consul.crt"
-      }
-
-      template {
-        data = "{{ key \"secrets/consul/consul-client.crt\" }}"
-        destination = "secrets/consul-client.crt"
-      }
-
-      template {
-        data = "{{ key \"secrets/consul/consul-client.key\" }}"
-        destination = "secrets/consul-client.key"
-      }
-
-      template {
-        data = <<EOH
-CONSUL_HTTP_ADDR=https://consul.service.staging.consul:8501
-CONSUL_HTTP_SSL=true
-CONSUL_CACERT=/etc/bottin/consul.crt
-CONSUL_CLIENT_CERT=/etc/bottin/consul-client.crt
-CONSUL_CLIENT_KEY=/etc/bottin/consul-client.key
-EOH
-        destination = "secrets/env"
-        env = true
-      }
-
-      service {
-        tags = [ "${meta.site}" ]
-        port = "ldap_port"
-        address_mode = "host"
-        name = "bottin"
-        check {
-          type = "tcp"
-          port = "ldap_port"
-          interval = "60s"
-          timeout = "5s"
-          check_restart {
-            limit = 3
-            grace = "90s"
-            ignore_warnings = false
-          }
-        }
-      }
-    }
-  }
-}

cluster/staging/app/core/deploy/d53.hcl

@@ -1,5 +1,5 @@
 job "core-d53" {
-  datacenters = ["neptune", "dathomir", "corrin", "bespin"]
+  datacenters = ["neptune", "jupiter", "corrin", "bespin"]
   type = "service"
   priority = 90
 

cluster/staging/app/core/deploy/diplonat.hcl

@@ -1,5 +1,5 @@
 job "core-diplonat" {
-  datacenters = ["neptune", "dathomir", "corrin", "bespin"]
+  datacenters = ["neptune", "jupiter", "corrin", "bespin"]
   type = "system"
   priority = 90
 

cluster/staging/app/core/deploy/tricot.hcl

@@ -1,5 +1,5 @@
 job "core-tricot" {
-  datacenters = ["neptune", "dathomir", "corrin", "bespin"]
+  datacenters = ["neptune", "jupiter", "corrin", "bespin"]
   type = "system"
   priority = 90
 
@@ -21,25 +21,20 @@ job "core-tricot" {
     }
 
     task "server" {
-      driver = "docker"
+      driver = "nix2"
 
       config {
-        image = "armael/tricot:40g7jpp915jkfszlczfh1yw2x6syjkxs-redir-headers"
+        packages = [
-        network_mode = "host"
+          "git+https://git.deuxfleurs.fr/Deuxfleurs/tricot.git?ref=redirect&rev=b76b6dcbcc47ebc61848389a6b0d5d4e8d8cde48"
-        readonly_rootfs = true
-        ports = [ "http_port", "https_port" ]
-        volumes = [
-          "secrets:/etc/tricot",
         ]
-        ulimit {
+        command = "tricot"
-          nofile = "65535:65535"
+        # cap_add = [ "net_bind_service" ]  # this doesn't work for whatever reason, so we need to put user = "root" instead
-        }
       }
+      user = "root"
 
       resources {
         cpu = 500
         memory = 200
-        memory_max = 500
       }
 
       restart {
@@ -51,17 +46,17 @@ job "core-tricot" {
 
       template {
         data = "{{ key \"secrets/consul/consul-ca.crt\" }}"
-        destination = "secrets/consul-ca.crt"
+        destination = "etc/tricot/consul-ca.crt"
       }
 
       template {
         data = "{{ key \"secrets/consul/consul-client.crt\" }}"
-        destination = "secrets/consul-client.crt"
+        destination = "etc/tricot/consul-client.crt"
       }
 
       template {
         data = "{{ key \"secrets/consul/consul-client.key\" }}"
-        destination = "secrets/consul-client.key"
+        destination = "etc/tricot/consul-client.key"
       }
 
       template {
@@ -76,8 +71,7 @@ TRICOT_CONSUL_CLIENT_KEY=/etc/tricot/consul-client.key
 TRICOT_HTTP_BIND_ADDR=[::]:80
 TRICOT_HTTPS_BIND_ADDR=[::]:443
 TRICOT_METRICS_BIND_ADDR=[::]:9334
-TRICOT_WARMUP_CERT_MEMORY_STORE=true
+RUST_LOG=tricot=debug
-RUST_LOG=tricot=trace
 RUST_BACKTRACE=1
 EOH
         destination = "secrets/env"
@@ -88,6 +82,9 @@ EOH
         name = "tricot-http"
         port = "http_port"
         tags = [
+          "d53-aaaa ${attr.unique.hostname}.machine.staging.deuxfleurs.org",
+          "d53-aaaa ${meta.site}.site.staging.deuxfleurs.org",
+          "d53-aaaa staging.deuxfleurs.org",
           "(diplonat (tcp_port 80))"
         ]
         address_mode = "host"
@@ -97,10 +94,7 @@ EOH
         name = "tricot-https"
         port = "https_port"
         tags = [
-          "(diplonat (tcp_port 443))",
+          "(diplonat (tcp_port 443))"
-          "d53-aaaa ${attr.unique.hostname}.machine.staging.deuxfleurs.org",
-          "d53-aaaa ${meta.site}.site.staging.deuxfleurs.org",
-          "d53-aaaa staging.deuxfleurs.org"
         ]
         address_mode = "host"
       }

cluster/staging/app/core/secrets.toml

@@ -1,8 +1,3 @@
-[secrets."directory/ldap_base_dn"]
-type = 'user'
-description = 'LDAP base DN for everything'
-example = 'dc=example,dc=com'
-
 [secrets."d53/gandi_api_key"]
 type = 'user'
 description = 'Gandi API key'

cluster/staging/app/cryptpad/config/application_config.js

@@ -1,40 +0,0 @@
-/*
- * You can override the configurable values from this file.
- * The recommended method is to make a copy of this file (/customize.dist/application_config.js)
-   in a 'customize' directory (/customize/application_config.js).
- * If you want to check all the configurable values, you can open the internal configuration file
-   but you should not change it directly (/common/application_config_internal.js)
-*/
-define(['/common/application_config_internal.js'], function (AppConfig) {
-    // To inform users of the support ticket panel which languages your admins speak:
-    AppConfig.supportLanguages = [ 'en', 'fr' ];
-
-    /* Select the buttons displayed on the main page to create new collaborative sessions.
-     * Removing apps from the list will prevent users from accessing them. They will instead be
-     * redirected to the drive.
-     * You should never remove the drive from this list.
-     */
-    AppConfig.availablePadTypes = ['drive', 'teams', 'doc', 'presentation', 'pad', 'kanban', 'code', 'form', 'poll', 'whiteboard',
-                                'file', 'contacts', 'slide', 'convert'];
-    // disabled: sheet
-
-    /* You can display a link to your own privacy policy in the static pages footer.
-     * Since this is different for each individual or organization there is no default value.
-     * See the comments above for a description of possible configurations.
-     */
-    AppConfig.privacy = {
-      "default": "https://deuxfleurs.fr/CGU.html",
-    };
-
-    /* You can display a link to your instances's terms of service in the static pages footer.
-     * A default is included for backwards compatibility, but we recommend replacing this
-     * with your own terms.
-     *
-     * See the comments above for a description of possible configurations.
-     */
-    AppConfig.terms = {
-      "default": "https://deuxfleurs.fr/CGU.html",
-    };
-
-    return AppConfig;
-});

cluster/staging/app/cryptpad/config/config.js

@@ -1,296 +0,0 @@
-/* globals module */
-
-/*  DISCLAIMER:
-
-    There are two recommended methods of running a CryptPad instance:
-
-    1. Using a standalone nodejs server without HTTPS (suitable for local development)
-    2. Using NGINX to serve static assets and to handle HTTPS for API server's websocket traffic
-
-    We do not officially recommend or support Apache, Docker, Kubernetes, Traefik, or any other configuration.
-    Support requests for such setups should be directed to their authors.
-
-    If you're having difficulty difficulty configuring your instance
-    we suggest that you join the project's IRC/Matrix channel.
-
-    If you don't have any difficulty configuring your instance and you'd like to
-    support us for the work that went into making it pain-free we are quite happy
-    to accept donations via our opencollective page: https://opencollective.com/cryptpad
-
-*/
-module.exports = {
-/*  CryptPad is designed to serve its content over two domains.
- *  Account passwords and cryptographic content is handled on the 'main' domain,
- *  while the user interface is loaded on a 'sandbox' domain
- *  which can only access information which the main domain willingly shares.
- *
- *  In the event of an XSS vulnerability in the UI (that's bad)
- *  this system prevents attackers from gaining access to your account (that's good).
- *
- *  Most problems with new instances are related to this system blocking access
- *  because of incorrectly configured sandboxes. If you only see a white screen
- *  when you try to load CryptPad, this is probably the cause.
- *
- *  PLEASE READ THE FOLLOWING COMMENTS CAREFULLY.
- *
- */
-
-/*  httpUnsafeOrigin is the URL that clients will enter to load your instance.
- *  Any other URL that somehow points to your instance is supposed to be blocked.
- *  The default provided below assumes you are loading CryptPad from a server
- *  which is running on the same machine, using port 3000.
- *
- *  In a production instance this should be available ONLY over HTTPS
- *  using the default port for HTTPS (443) ie. https://cryptpad.fr
- *  In such a case this should be also handled by NGINX, as documented in
- *  cryptpad/docs/example.nginx.conf (see the $main_domain variable)
- *
- */
-    httpUnsafeOrigin: 'https://pad.staging.deuxfleurs.org',
-
-/*  httpSafeOrigin is the URL that is used for the 'sandbox' described above.
- *  If you're testing or developing with CryptPad on your local machine then
- *  it is appropriate to leave this blank. The default behaviour is to serve
- *  the main domain over port 3000 and to serve the sandbox content over port 3001.
- *
- *  This is not appropriate in a production environment where invasive networks
- *  may filter traffic going over abnormal ports.
- *  To correctly configure your production instance you must provide a URL
- *  with a different domain (a subdomain is sufficient).
- *  It will be used to load the UI in our 'sandbox' system.
- *
- *  This value corresponds to the $sandbox_domain variable
- *  in the example nginx file.
- *
- *  Note that in order for the sandboxing system to be effective
- *  httpSafeOrigin must be different from httpUnsafeOrigin.
- *
- *  CUSTOMIZE AND UNCOMMENT THIS FOR PRODUCTION INSTALLATIONS.
- */
-    httpSafeOrigin: "https://pad-sandbox.staging.deuxfleurs.org",
-
-/*  httpAddress specifies the address on which the nodejs server
- *  should be accessible. By default it will listen on 127.0.0.1
- *  (IPv4 localhost on most systems). If you want it to listen on
- *  all addresses, including IPv6, set this to '::'.
- *
- */
-    httpAddress: '::',
-
-/*  httpPort specifies on which port the nodejs server should listen.
- *  By default it will serve content over port 3000, which is suitable
- *  for both local development and for use with the provided nginx example,
- *  which will proxy websocket traffic to your node server.
- *
- */
-    httpPort: 3000,
-
-/*  httpSafePort allows you to specify an alternative port from which
- *  the node process should serve sandboxed assets. The default value is
- *  that of your httpPort + 1. You probably don't need to change this.
- *
- */
-    // httpSafePort: 3001,
-
-/*  CryptPad will launch a child process for every core available
- *  in order to perform CPU-intensive tasks in parallel.
- *  Some host environments may have a very large number of cores available
- *  or you may want to limit how much computing power CryptPad can take.
- *  If so, set 'maxWorkers' to a positive integer.
- */
-    // maxWorkers: 4,
-
-    /* =====================
-     *         Admin
-     * ===================== */
-
-    /*
-     *  CryptPad contains an administration panel. Its access is restricted to specific
-     *  users using the following list.
-     *  To give access to the admin panel to a user account, just add their public signing
-     *  key, which can be found on the settings page for registered users.
-     *  Entries should be strings separated by a comma.
-     */
-    adminKeys: [
-      "[quentin@pad.deuxfleurs.fr/EWtzm-CiqJnM9RZL9mj-YyTgAtX-Zh76sru1K5bFpN8=]",
-      "[adrn@pad.deuxfleurs.fr/PxDpkPwd-jDJWkfWdAzFX7wtnLpnPlBeYZ4MmoEYS6E=]",
-      "[lx@pad.deuxfleurs.fr/FwQzcXywx1FIb83z6COB7c3sHnz8rNSDX1xhjPuH3Fg=]",
-      "[trinity-1686a@pad.deuxfleurs.fr/Pu6Ef03jEsAGBbZI6IOdKd6+5pORD5N51QIYt4-Ys1c=]",
-      "[Jill@pad.deuxfleurs.fr/tLW7W8EVNB2KYETXEaOYR+HmNiBQtZj7u+SOxS3hGmg=]",
-      "[vincent@pad.deuxfleurs.fr/07FQiE8w1iztRWwzbRJzEy3xIqnNR31mUFjLNiGXjwU=]",
-      "[boris@pad.deuxfleurs.fr/kHo5LIhSxDFk39GuhGRp+XKlMjNe+lWfFWM75cINoTQ=]",
-      "[maximilien@pad.deuxfleurs.fr/UoXHLejYRUjvX6t55hAQKpjMdU-3ecg4eDhAeckZmyE=]",
-      "[armael@pad.deuxfleurs.fr/CIKMvNdFxGavwTmni0TnR3x9GM0ypgx3DMcFyzppplU=]",
-      "[bjonglez@pad.deuxfleurs.fr/+RRzwcLPj5ZCWELUXMjmt3u+-lvYnyhpDt4cqAn9nh8=]"
-    ],
-
-    /* =====================
-     *        STORAGE
-     * ===================== */
-
-    /*  Pads that are not 'pinned' by any registered user can be set to expire
-     *  after a configurable number of days of inactivity (default 90 days).
-     *  The value can be changed or set to false to remove expiration.
-     *  Expired pads can then be removed using a cron job calling the
-     *  `evict-inactive.js` script with node
-     *
-     *  defaults to 90 days if nothing is provided
-     */
-    //inactiveTime: 90, // days
-
-    /*  CryptPad archives some data instead of deleting it outright.
-     *  This archived data still takes up space and so you'll probably still want to
-     *  remove these files after a brief period.
-     *
-     *  cryptpad/scripts/evict-inactive.js is intended to be run daily
-     *  from a crontab or similar scheduling service.
-     *
-     *  The intent with this feature is to provide a safety net in case of accidental
-     *  deletion. Set this value to the number of days you'd like to retain
-     *  archived data before it's removed permanently.
-     *
-     *  defaults to 15 days if nothing is provided
-     */
-    //archiveRetentionTime: 15,
-
-    /*  It's possible to configure your instance to remove data
-     *  stored on behalf of inactive accounts. Set 'accountRetentionTime'
-     *  to the number of days an account can remain idle before its
-     *  documents and other account data is removed.
-     *
-     *  Leave this value commented out to preserve all data stored
-     *  by user accounts regardless of inactivity.
-     */
-     //accountRetentionTime: 365,
-
-    /*  Starting with CryptPad 3.23.0, the server automatically runs
-     *  the script responsible for removing inactive data according to
-     *  your configured definition of inactivity. Set this value to `true`
-     *  if you prefer not to remove inactive data, or if you prefer to
-     *  do so manually using `scripts/evict-inactive.js`.
-     */
-    //disableIntegratedEviction: true,
-
-
-    /*  Max Upload Size (bytes)
-     *  this sets the maximum size of any one file uploaded to the server.
-     *  anything larger than this size will be rejected
-     *  defaults to 20MB if no value is provided
-     */
-    //maxUploadSize: 20 * 1024 * 1024,
-
-    /*  Users with premium accounts (those with a plan included in their customLimit)
-     *  can benefit from an increased upload size limit. By default they are restricted to the same
-     *  upload size as any other registered user.
-     *
-     */
-    //premiumUploadSize: 100 * 1024 * 1024,
-
-    /* =====================
-     *   DATABASE VOLUMES
-     * ===================== */
-
-    /*
-     * We need this config entry, else CryptPad will try to mkdir
-     * some stuff into Nix store apparently...
-     */
-    base: '/mnt/data',
-
-    /*
-     *  CryptPad stores each document in an individual file on your hard drive.
-     *  Specify a directory where files should be stored.
-     *  It will be created automatically if it does not already exist.
-     */
-    filePath: '/mnt/datastore/',
-
-    /*  CryptPad offers the ability to archive data for a configurable period
-     *  before deleting it, allowing a means of recovering data in the event
-     *  that it was deleted accidentally.
-     *
-     *  To set the location of this archive directory to a custom value, change
-     *  the path below:
-     */
-    archivePath: '/mnt/data/archive',
-
-    /*  CryptPad allows logged in users to request that particular documents be
-     *  stored by the server indefinitely. This is called 'pinning'.
-     *  Pin requests are stored in a pin-store. The location of this store is
-     *  defined here.
-     */
-    pinPath: '/mnt/data/pins',
-
-    /*  if you would like the list of scheduled tasks to be stored in
-        a custom location, change the path below:
-    */
-    taskPath: '/mnt/data/tasks',
-
-    /*  if you would like users' authenticated blocks to be stored in
-        a custom location, change the path below:
-    */
-    blockPath: '/mnt/block',
-
-    /*  CryptPad allows logged in users to upload encrypted files. Files/blobs
-     *  are stored in a 'blob-store'. Set its location here.
-     */
-    blobPath: '/mnt/blob',
-
-    /*  CryptPad stores incomplete blobs in a 'staging' area until they are
-     *  fully uploaded. Set its location here.
-     */
-    blobStagingPath: '/mnt/data/blobstage',
-
-    decreePath: '/mnt/data/decrees',
-
-    /* CryptPad supports logging events directly to the disk in a 'logs' directory
-     * Set its location here, or set it to false (or nothing) if you'd rather not log
-     */
-    logPath: false,
-
-    /* =====================
-     *       Debugging
-     * ===================== */
-
-    /*  CryptPad can log activity to stdout
-     *  This may be useful for debugging
-     */
-    logToStdout: true,
-
-    /* CryptPad can be configured to log more or less
-     * the various settings are listed below by order of importance
-     *
-     * silly, verbose, debug, feedback, info, warn, error
-     *
-     * Choose the least important level of logging you wish to see.
-     * For example, a 'silly' logLevel will display everything,
-     * while 'info' will display 'info', 'warn', and 'error' logs
-     *
-     * This will affect both logging to the console and the disk.
-     */
-    logLevel: 'silly',
-
-    /*  clients can use the /settings/ app to opt out of usage feedback
-     *  which informs the server of things like how much each app is being
-     *  used, and whether certain clientside features are supported by
-     *  the client's browser. The intent is to provide feedback to the admin
-     *  such that the service can be improved. Enable this with `true`
-     *  and ignore feedback with `false` or by commenting the attribute
-     *
-     *  You will need to set your logLevel to include 'feedback'. Set this
-     *  to false if you'd like to exclude feedback from your logs.
-     */
-    logFeedback: false,
-
-    /*  CryptPad supports verbose logging
-     *  (false by default)
-     */
-    verbose: true,
-
-    /*  Surplus information:
-     *
-     *  'installMethod' is included in server telemetry to voluntarily
-     *  indicate how many instances are using unofficial installation methods
-     *  such as Docker.
-     *
-     */
-    installMethod: 'deuxfleurs.fr',
-};

cluster/staging/app/cryptpad/deploy/cryptpad.hcl

@@ -1,80 +0,0 @@
-job "cryptpad" {
-  datacenters = ["neptune"]
-  type = "service"
-
-  group "cryptpad" {
-    count = 1
-
-    network {
-      port "http" {
-        to = 3000
-      }
-    }
-
-    restart {
-      attempts = 10
-      delay    = "30s"
-    }
-
-    task "main" {
-      driver = "docker"
-
-      constraint {
-        attribute = "${attr.unique.hostname}"
-        operator = "="
-        value = "caribou"
-      }
-
-      config {
-        image = "kokakiwi/cryptpad:2024.9.0"
-        ports = [ "http" ]
-
-        volumes = [
-          "/mnt/ssd/cryptpad:/mnt",
-          "secrets/config.js:/cryptpad/config.js",
-        ]
-      }
-      env {
-        CRYPTPAD_CONFIG = "/cryptpad/config.js"
-      }
-
-      template {
-        data = file("../config/config.js")
-        destination = "secrets/config.js"
-      }
-
-      /* Disabled because it requires modifications to the docker image and I do not want to invest the time yet
-      template {
-        data = file("../config/application_config.js")
-        destination = "secrets/config.js"
-      }
-      */
-
-      resources {
-        memory = 1000
-        cpu = 500
-      }
-
-      service {
-        name = "cryptpad"
-        port = "http"
-        tags = [
-          "tricot pad.staging.deuxfleurs.org",
-          "tricot pad-sandbox.staging.deuxfleurs.org",
-          "tricot-add-header Cross-Origin-Resource-Policy cross-origin",
-          "tricot-add-header Cross-Origin-Embedder-Policy require-corp",
-          "tricot-add-header Access-Control-Allow-Origin *",
-          "tricot-add-header Access-Control-Allow-Credentials true",
-          "d53-cname pad.staging.deuxfleurs.org",
-          "d53-cname pad-sandbox.staging.deuxfleurs.org",
-        ]
-        check {
-          type = "http"
-          path = "/"
-          interval = "10s"
-          timeout = "2s"
-        }
-      }
-    }
-  }
-}

cluster/staging/app/directory/config/guichet/config.json.tpl

@@ -1,15 +1,12 @@
 {
   "http_bind_addr": ":9991",
-  "ldap_server_addr": "ldap://{{ env "meta.site" }}.bottin.service.staging.consul:389",
+  "ldap_server_addr": "ldap://bottin.service.staging.consul:389",
 
   "base_dn": "{{ key "secrets/directory/ldap_base_dn" }}",
   "user_base_dn": "ou=users,{{ key "secrets/directory/ldap_base_dn" }}",
   "user_name_attr": "cn",
   "group_base_dn": "ou=groups,{{ key "secrets/directory/ldap_base_dn" }}",
   "group_name_attr": "cn",
-  "mailing_list_base_dn": "ou=mailing_lists,ou=groups,{{ key "secrets/directory/ldap_base_dn" }}",
-  "mailing_list_name_attr": "cn",
-  "mailing_list_guest_user_base_dn": "ou=guests,ou=users,{{ key "secrets/directory/ldap_base_dn" }}",
 
   "invitation_base_dn": "ou=invitations,{{ key "secrets/directory/ldap_base_dn" }}",
   "invitation_name_attr": "cn",