bagage/internal/encoding/ssh/filexfer/packets.go
2021-11-19 19:54:49 +01:00

323 lines
10 KiB
Go
Raw Blame History

This file contains ambiguous Unicode characters

This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

package filexfer
import (
"errors"
"fmt"
"io"
)
// smallBufferSize is an initial allocation minimal capacity.
const smallBufferSize = 64
func newPacketFromType(typ PacketType) (Packet, error) {
switch typ {
case PacketTypeOpen:
return new(OpenPacket), nil
case PacketTypeClose:
return new(ClosePacket), nil
case PacketTypeRead:
return new(ReadPacket), nil
case PacketTypeWrite:
return new(WritePacket), nil
case PacketTypeLStat:
return new(LStatPacket), nil
case PacketTypeFStat:
return new(FStatPacket), nil
case PacketTypeSetstat:
return new(SetstatPacket), nil
case PacketTypeFSetstat:
return new(FSetstatPacket), nil
case PacketTypeOpenDir:
return new(OpenDirPacket), nil
case PacketTypeReadDir:
return new(ReadDirPacket), nil
case PacketTypeRemove:
return new(RemovePacket), nil
case PacketTypeMkdir:
return new(MkdirPacket), nil
case PacketTypeRmdir:
return new(RmdirPacket), nil
case PacketTypeRealPath:
return new(RealPathPacket), nil
case PacketTypeStat:
return new(StatPacket), nil
case PacketTypeRename:
return new(RenamePacket), nil
case PacketTypeReadLink:
return new(ReadLinkPacket), nil
case PacketTypeSymlink:
return new(SymlinkPacket), nil
case PacketTypeExtended:
return new(ExtendedPacket), nil
default:
return nil, fmt.Errorf("unexpected request packet type: %v", typ)
}
}
// RawPacket implements the general packet format from draft-ietf-secsh-filexfer-02
//
// RawPacket is intended for use in clients receiving responses,
// where a response will be expected to be of a limited number of types,
// and unmarshaling unknown/unexpected response packets is unnecessary.
//
// For servers expecting to receive arbitrary request packet types,
// use RequestPacket.
//
// Defined in https://tools.ietf.org/html/draft-ietf-secsh-filexfer-02#section-3
type RawPacket struct {
PacketType PacketType
RequestID uint32
Data Buffer
}
// Type returns the Type field defining the SSH_FXP_xy type for this packet.
func (p *RawPacket) Type() PacketType {
return p.PacketType
}
// Reset clears the pointers and reference-semantic variables of RawPacket,
// releasing underlying resources, and making them and the RawPacket suitable to be reused,
// so long as no other references have been kept.
func (p *RawPacket) Reset() {
p.Data = Buffer{}
}
// MarshalPacket returns p as a two-part binary encoding of p.
//
// The internal p.RequestID is overridden by the reqid argument.
func (p *RawPacket) MarshalPacket(reqid uint32, b []byte) (header, payload []byte, err error) {
buf := NewBuffer(b)
if buf.Cap() < 9 {
buf = NewMarshalBuffer(0)
}
buf.StartPacket(p.PacketType, reqid)
return buf.Packet(p.Data.Bytes())
}
// MarshalBinary returns p as the binary encoding of p.
//
// This is a convenience implementation primarily intended for tests,
// because it is inefficient with allocations.
func (p *RawPacket) MarshalBinary() ([]byte, error) {
return ComposePacket(p.MarshalPacket(p.RequestID, nil))
}
// UnmarshalFrom decodes a RawPacket from the given Buffer into p.
//
// The Data field will alias the passed in Buffer,
// so the buffer passed in should not be reused before RawPacket.Reset().
func (p *RawPacket) UnmarshalFrom(buf *Buffer) error {
typ, err := buf.ConsumeUint8()
if err != nil {
return err
}
p.PacketType = PacketType(typ)
if p.RequestID, err = buf.ConsumeUint32(); err != nil {
return err
}
p.Data = *buf
return nil
}
// UnmarshalBinary decodes a full raw packet out of the given data.
// It is assumed that the uint32(length) has already been consumed to receive the data.
//
// This is a convenience implementation primarily intended for tests,
// because this must clone the given data byte slice,
// as Data is not allowed to alias any part of the data byte slice.
func (p *RawPacket) UnmarshalBinary(data []byte) error {
clone := make([]byte, len(data))
n := copy(clone, data)
return p.UnmarshalFrom(NewBuffer(clone[:n]))
}
// readPacket reads a uint32 length-prefixed binary data packet from r.
// using the given byte slice as a backing array.
//
// If the packet length read from r is bigger than maxPacketLength,
// or greater than math.MaxInt32 on a 32-bit implementation,
// then a `ErrLongPacket` error will be returned.
//
// If the given byte slice is insufficient to hold the packet,
// then it will be extended to fill the packet size.
func readPacket(r io.Reader, b []byte, maxPacketLength uint32) ([]byte, error) {
if cap(b) < 4 {
// We will need allocate our own buffer just for reading the packet length.
// However, we dont really want to allocate an extremely narrow buffer (4-bytes),
// and cause unnecessary allocation churn from both length reads and small packet reads,
// so we use smallBufferSize from the bytes package as a reasonable guess.
// But if callers really do want to force narrow throw-away allocation of every packet body,
// they can do so with a buffer of capacity 4.
b = make([]byte, smallBufferSize)
}
if _, err := io.ReadFull(r, b[:4]); err != nil {
return nil, err
}
length := unmarshalUint32(b)
if int(length) < 5 {
// Must have at least uint8(type) and uint32(request-id)
if int(length) < 0 {
// Only possible when strconv.IntSize == 32,
// the packet length is longer than math.MaxInt32,
// and thus longer than any possible slice.
return nil, ErrLongPacket
}
return nil, ErrShortPacket
}
if length > maxPacketLength {
return nil, ErrLongPacket
}
if int(length) > cap(b) {
// We know int(length) must be positive, because of tests above.
b = make([]byte, length)
}
n, err := io.ReadFull(r, b[:length])
return b[:n], err
}
// ReadFrom provides a simple functional packet reader,
// using the given byte slice as a backing array.
//
// To protect against potential denial of service attacks,
// if the read packet length is longer than maxPacketLength,
// then no packet data will be read, and ErrLongPacket will be returned.
// (On 32-bit int architectures, all packets >= 2^31 in length
// will return ErrLongPacket regardless of maxPacketLength.)
//
// If the read packet length is longer than cap(b),
// then a throw-away slice will allocated to meet the exact packet length.
// This can be used to limit the length of reused buffers,
// while still allowing reception of occasional large packets.
//
// The Data field may alias the passed in byte slice,
// so the byte slice passed in should not be reused before RawPacket.Reset().
func (p *RawPacket) ReadFrom(r io.Reader, b []byte, maxPacketLength uint32) error {
b, err := readPacket(r, b, maxPacketLength)
if err != nil {
return err
}
return p.UnmarshalFrom(NewBuffer(b))
}
// RequestPacket implements the general packet format from draft-ietf-secsh-filexfer-02
// but also automatically decode/encodes valid request packets (2 < type < 100 || type == 200).
//
// RequestPacket is intended for use in servers receiving requests,
// where any arbitrary request may be received, and so decoding them automatically
// is useful.
//
// For clients expecting to receive specific response packet types,
// where automatic unmarshaling of the packet body does not make sense,
// use RawPacket.
//
// Defined in https://tools.ietf.org/html/draft-ietf-secsh-filexfer-02#section-3
type RequestPacket struct {
RequestID uint32
Request Packet
}
// Type returns the SSH_FXP_xy value associated with the underlying packet.
func (p *RequestPacket) Type() PacketType {
return p.Request.Type()
}
// Reset clears the pointers and reference-semantic variables in RequestPacket,
// releasing underlying resources, and making them and the RequestPacket suitable to be reused,
// so long as no other references have been kept.
func (p *RequestPacket) Reset() {
p.Request = nil
}
// MarshalPacket returns p as a two-part binary encoding of p.
//
// The internal p.RequestID is overridden by the reqid argument.
func (p *RequestPacket) MarshalPacket(reqid uint32, b []byte) (header, payload []byte, err error) {
if p.Request == nil {
return nil, nil, errors.New("empty request packet")
}
return p.Request.MarshalPacket(reqid, b)
}
// MarshalBinary returns p as the binary encoding of p.
//
// This is a convenience implementation primarily intended for tests,
// because it is inefficient with allocations.
func (p *RequestPacket) MarshalBinary() ([]byte, error) {
return ComposePacket(p.MarshalPacket(p.RequestID, nil))
}
// UnmarshalFrom decodes a RequestPacket from the given Buffer into p.
//
// The Request field may alias the passed in Buffer, (e.g. SSH_FXP_WRITE),
// so the buffer passed in should not be reused before RequestPacket.Reset().
func (p *RequestPacket) UnmarshalFrom(buf *Buffer) error {
typ, err := buf.ConsumeUint8()
if err != nil {
return err
}
p.Request, err = newPacketFromType(PacketType(typ))
if err != nil {
return err
}
if p.RequestID, err = buf.ConsumeUint32(); err != nil {
return err
}
return p.Request.UnmarshalPacketBody(buf)
}
// UnmarshalBinary decodes a full request packet out of the given data.
// It is assumed that the uint32(length) has already been consumed to receive the data.
//
// This is a convenience implementation primarily intended for tests,
// because this must clone the given data byte slice,
// as Request is not allowed to alias any part of the data byte slice.
func (p *RequestPacket) UnmarshalBinary(data []byte) error {
clone := make([]byte, len(data))
n := copy(clone, data)
return p.UnmarshalFrom(NewBuffer(clone[:n]))
}
// ReadFrom provides a simple functional packet reader,
// using the given byte slice as a backing array.
//
// To protect against potential denial of service attacks,
// if the read packet length is longer than maxPacketLength,
// then no packet data will be read, and ErrLongPacket will be returned.
// (On 32-bit int architectures, all packets >= 2^31 in length
// will return ErrLongPacket regardless of maxPacketLength.)
//
// If the read packet length is longer than cap(b),
// then a throw-away slice will allocated to meet the exact packet length.
// This can be used to limit the length of reused buffers,
// while still allowing reception of occasional large packets.
//
// The Request field may alias the passed in byte slice,
// so the byte slice passed in should not be reused before RawPacket.Reset().
func (p *RequestPacket) ReadFrom(r io.Reader, b []byte, maxPacketLength uint32) error {
b, err := readPacket(r, b, maxPacketLength)
if err != nil {
return err
}
return p.UnmarshalFrom(NewBuffer(b))
}