videobridge { entity-expiration { # If an entity has no activity after this timeout, it is expired timeout=1 minute # The interval at which the videobridge will check for expired entities check-interval=${videobridge.entity-expiration.timeout} } health { # The interval between health checks interval=10 seconds # The timeout for a health check timeout=30 seconds # If performing a health check takes longer than this, it is considered unsuccessful. max-check-duration=3 seconds # Whether or not health check failures should be 'sticky' # (i.e. once the bridge becomes unhealthy, it will never # go back to a healthy state) sticky-failures=false } ep-connection-status { # How long we'll wait for an endpoint to *start* sending # data before we consider it 'inactive' first-transfer-timeout=15 seconds # How long an endpoint can be 'inactive' before it will # be considered disconnected max-inactivity-limit=3 seconds # How often we check endpoint's connectivity status check-interval=500 milliseconds } cc { bwe-change-threshold=0.15 thumbnail-max-height-px=180 onstage-ideal-height-px=1080 onstage-preferred-height-px=360 onstage-preferred-framerate=30 enable-onstage-video-suspend=false trust-bwe=true # How often we check to send probing data padding-period=15ms # How often we'll force recalculations of forwarded # streams max-time-between-calculations = 15 seconds # A JVB-wide last-n value, observed by all endpoints. Endpoints # will take the minimum of their setting and this one (-1 implies # no last-n limit) jvb-last-n = -1 } # The APIs by which the JVB can be controlled apis { xmpp-client { # The interval at which presence is published in the configured MUCs. presence-interval = ${videobridge.stats.interval} configs { unique-xmpp-server { hostname="172.17.0.1" domain = "auth.jitsi" username = "jvb" password = "jvbpass" port = 5222 muc_jids = "jvbbrewery@internal.auth.jitsi" # The muc_nickname must be unique across all jitsi-videobridge instances muc_nickname = "unique-jvb-server" disable_certificate_verification = false } # example-connection-id { # For the properties which should be # filled out here, see MucClientConfiguration # } } } # The COLIBRI REST API rest { enabled = true } jvb-api { enabled = true } } # Configuration of the different REST APIs. # Note that the COLIBRI REST API is configured under videobridge.apis.rest instead. rest { debug { enabled = true } health { enabled = true } shutdown { # Note that the shutdown API requires the COLIBRI API to also be enabled. enabled = false } version { enabled = true } } http-servers { # The HTTP server which hosts services intended for 'public' use # (e.g. websockets for the bridge channel connection) public { # See JettyBundleActivatorConfig in Jicoco for values port = -1 tls-port = -1 } # The HTTP server which hosts services intended for 'private' use # (e.g. health or debug stats) private { # See JettyBundleActivatorConfig in Jicoco for values host = 127.0.0.1 } } octo { # Whether or not Octo is enabled enabled=false # A string denoting the 'region' of this JVB. This region # will be used by Jicofo in the selection of a bridge for # a client by comparing it to the client's region. # Must be set when 'enabled' is true #region="us-west-1" # The address on which the Octo relay should bind # Must be set when 'enabled' is true #bind-address=198.51.100.1 # The port to which the Octo relay should bind bind-port=4096 # The address which controls the public address which # will be part of the Octo relayId #public-address=198.51.100.1 # The size of the incoming octo queue. This queue is per-remote-endpoint, # so it matches what we use for local endpoints recv-queue-size=1024 # The size of the outgoing octo queue. This is a per-originating-endpoint # queue, so assuming all packets are routed (as they currently are for Octo) # it should be the same size as the transceiver recv queue in # jitsi-media-transform. Repeating the description from there: # Assuming 300pps for high-definition, 200pps for standard-definition, # 100pps for low-definition and 50pps for audio, this queue is fed # 650pps, so its size in terms of millis is 1024/650*1000 ~= 1575ms. send-queue-size=1024 } load-management { # Whether or not the reducer will be enabled to take actions to mitigate load reducer-enabled = false load-measurements { packet-rate { # The packet rate at which we'll consider the bridge overloaded load-threshold = 50000 # The packet rate at which we'll consider the bridge 'underloaded' enough # to start recovery recovery-threshold = 40000 } } load-reducers { last-n { # The factor by which we'll reduce the current last-n when trying to reduce load reduction-scale = .75 # The factor by which we'll increase the current last-n when trying to recover recover-scale = 1.25 # The minimum time in between runs of the last-n reducer to reduce or recover from # load impact-time = 1 minute # The lowest value we'll set for last-n minimum-last-n-value = 0 # The highest last-n value we'll enforce. Once the enforced last-n exceeds this value # we'll remove the limit entirely maximum-enforced-last-n-value = 40 } } } sctp { # Whether SCTP data channels are enabled. enabled=true } stats { # Whether periodic collection of statistics is enabled or not. When enabled they are accessible through the REST # API (at `/colibri/stats`), and are available to other modules (e.g. to be pushed to callstats or in a MUC). enabled = true # The interval at which stats are gathered. interval = 5 seconds # Configuration related to pushing statistics to callstats.io. callstats { # An integer application ID (use 0 to disable pushing stats to callstats). app-id = 0 # The shared secred to authentication with callstats.io. //app-secret = "s3cret" # ID of the key that was used to generate token. //key-id = "abcd" # The path to private key file. //key-path = "/etc/jitsi/videobridge/ecpriv.jwk" # The ID of the server instance to be used when reporting to callstats. bridge-id = "jitsi" # TODO: document //conference-id-prefix = "abcd" # The interval at which statististics will be published to callstats. This affects both per-conference and global # statistics. # Note that this value will be overriden if a "callstatsio" transport is defined in the parent "stats" section. interval = ${videobridge.stats.interval} } } websockets { enabled=false server-id="default-id" # Optional, even when 'enabled' is set to true # tls=true # Must be set when enabled = true #domain="some-domain" } ice { tcp { # Whether ICE/TCP is enabled. enabled = true # The port to bind to for ICE/TCP. port = 8089 # An optional additional port to advertise. # mapped-port = 8443 # Whether to use "ssltcp" or plain "tcp". ssltcp = true } udp { # The port for ICE/UDP. port = 10000 } # An optional prefix to include in STUN username fragments generated by the bridge. #ufrag-prefix = "jvb-123:" # Which candidate pairs to keep alive. The accepted values are defined in ice4j's KeepAliveStrategy: # "selected_and_tcp", "selected_only", or "all_succeeded". keep-alive-strategy = "selected_and_tcp" # Whether to use the "component socket" feature of ice4j. use-component-socket = true # Whether to attempt DNS resolution for remote candidates that contain a non-literal address. When set to 'false' # such candidates will be ignored. resolve-remote-candidates = false # The nomination strategy to use for ICE. THe accepted values are defined in ice4j's NominationStrategy: # "NominateFirstValid", "NominateHighestPriority", "NominateFirstHostOrReflexiveValid", or "NominateBestRTT". nomination-strategy = "NominateFirstValid" } transport { send { # The size of the dtls-transport outgoing queue. This is a per-participant # queue. Packets from the egress end-up in this queue right before # transmission by the outgoing srtp pipeline (which mainly consists of the # packet sender). # # Its size needs to be of the same order of magnitude as the rtp sender # queue. In a 100 participant call, assuming 300pps for the on-stage and # 100pps for low-definition, last-n 20 and 2 participants talking, so # 2*50pps for audio, this queue is fed 300+19*100+2*50 = 2300pps, so its # size in terms of millis is 1024/2300*1000 ~= 445ms. queue-size=1024 } } version { // Wheather to announe the jitsi-videobridge version to clients in the ServerHello message. announce = false } }