fbe8fe81f2
Add automatic peer discovery from Consul
2020-06-30 18:33:14 +02:00
db6f1f35a8
Rename epidemic_factor to epidemic_fanout (that's what it is); complete conf example in readme
2020-06-30 15:03:34 +02:00
fa13cf6996
Repair: do not mark deleted when upstream object is not found
...
With the previous behaviour, repairing could see some data as absent
and decide that the object or version was deleted,
thus going on to delete the version and blocks.
In the case where read_quorum + write_quorum <= replication_factor
however, entries may not yet be returned by the get, thus data would
have been deleted that should hot have been. The new behavior is more
cautious and just skips the entry when the warning is emitted.
2020-05-04 13:30:42 +00:00
b46a7788d1
Implement HTTP ranges in get
2020-05-04 13:09:23 +00:00
16fbb32fd3
Rate limit requests a bit more seriously
...
droping the slot later (after reading the request response)
means that we aren't freeing our quota slot,
so the maximum number of simultaneous requests now also counts the
response reading phase
TODO next: quotas per rpc destination node, or maybe per datacenter (?)
2020-05-01 19:18:54 +00:00
d867bbcfb5
Implement DeleteObjects
2020-05-01 15:52:35 +00:00
3324971701
Slightly improved S3 compatibility
...
- ListBucket does not require any of the parameters (delimiter,
prefix, max-keys, etc)
- URLs are properly percent_decoded
- PutObject and DeleteObject calls now answer correctly
(empty body, version id in the x-amz-version-id: header)
2020-05-01 14:30:50 +00:00
3686f100b7
Compatibility fixes
2020-04-28 10:35:04 +00:00
0957d0fdfa
Work on API
2020-04-28 10:18:14 +00:00
0877a5500c
Abort multipart upload
2020-04-26 20:46:33 +00:00
81ecc4999e
Implement multipart uploads
2020-04-26 20:39:32 +00:00
1999c0ae51
Update delete code
2020-04-26 19:11:19 +00:00
0a283e4e70
Fix deletion propagation
2020-04-26 18:59:17 +00:00
9cb870f950
Prepare for multipart uploads
2020-04-26 18:55:13 +00:00
ea7e4748ed
S3 compatibility: fix bucket listing and HEAD and PUT on bucket
2020-04-26 16:22:33 +00:00
0e49e0c8b5
Add key table to repair procedure
2020-04-26 16:22:22 +00:00
e3203f998b
Remove leading / in keys; better delimiter handling
2020-04-24 22:28:15 +02:00
be4831d768
Less verbosity
2020-04-24 19:27:27 +00:00
a52db67954
xml escape
2020-04-24 18:56:00 +00:00
91b2d1fcc1
Some basic S3 functionnality
2020-04-24 18:47:11 +00:00
f2e05986c4
Starting to be S3 compatible
2020-04-24 17:46:52 +00:00
d8f5e643bc
Split code for modular compilation
2020-04-24 10:10:01 +00:00
51fb3799a1
Key management admin commands
2020-04-23 20:25:45 +00:00
4ef84a0558
Move repair to separate file
2020-04-23 18:36:12 +00:00
44a1089d95
Make table objects slightly more fool-proof; add key table
2020-04-23 18:16:52 +00:00
c9c6b0dbd4
Reorganize code
2020-04-23 17:05:46 +00:00
01a8acdeec
Better error reporting
2020-04-23 16:23:06 +00:00
82f4cd8719
Continue pinging nodes when they are down ; overall better handling of down nodes
2020-04-23 16:06:11 +00:00
2fe82be3bc
RPC to ourself do not pass through serialization + HTTPS
2020-04-23 14:40:59 +00:00
37f880bc09
RequestStrategy with possible interruption or not
2020-04-23 13:37:10 +00:00
73574ab43e
Fix in rpc_client (see comment in code)
2020-04-22 20:42:23 +00:00
897fafa8db
Improvements to block resync queue & worker
2020-04-22 20:32:58 +00:00
2556a1e383
I'm stupid though
2020-04-22 20:06:12 +00:00
231cb32955
Do not delete block if just a single replication error. Write TODO stuff.
2020-04-22 19:25:15 +00:00
8971f34c81
Well they still have to exit when we're exiting though
2020-04-22 17:04:33 +00:00
e8214cb180
Better concurrency:
...
Use Notify instead of stupid sleep in background worker
Use Semaphore to limit concurrent requests in rpc_client
Make more background tasks cancellable
2020-04-22 16:51:52 +00:00
ec59e896c6
Make UUID & Hash Copy and remove some .clone() noise
2020-04-21 17:08:42 +00:00
8915224966
Return BadRequest codes for some admin_rpc failure cases
2020-04-21 16:45:32 +00:00
b1ddb933b0
Make the repair command accept subcommands to not do everything all the time
2020-04-21 16:40:17 +00:00
a04218047e
Do full sync on node (re)start
2020-04-21 16:15:32 +00:00
2a84d965ab
Improve table sync
2020-04-21 16:05:55 +00:00
0226561035
Do not insert deletion marker if there is no object to delete
2020-04-21 14:33:12 +00:00
be0a2bae81
Add node tags in configuration
2020-04-21 14:08:28 +00:00
cc4f2f1cfb
Pretty logging
2020-04-21 12:54:55 +00:00
53cf4d1baa
Log which workers are doing what
2020-04-19 21:33:38 +00:00
ec7f9f07e2
Implement repair object->version and version->block ref
2020-04-19 21:27:08 +00:00
04acaea231
Don't do version & block_ref updates in background on deletion
2020-04-19 20:52:20 +00:00
5ae32972ef
Implement repair command
2020-04-19 20:36:36 +00:00
a54f3158f1
Less output
2020-04-19 19:38:45 +00:00
ea75564851
More aggressive sync timings & improve other stuff
2020-04-19 17:59:59 +00:00
e325c7f47a
Add hostname to node info
2020-04-19 19:08:48 +02:00
a6129d8626
Begin implement bucket management & admin commands
2020-04-19 17:15:48 +02:00
302502f4c1
Add support for fully replicated tables with epidemic dissemination of updates
2020-04-19 15:14:23 +02:00
7131553c53
Refactor sharding logic; coming next: full replication with epidemic dissemination
2020-04-19 13:22:28 +02:00
4ba54ccfca
Reorder imports.
...
Trying to separate:
1. Stuff for handling the swarm of nodes and generic table data replication
2. Stuff for the object store core application: metadata tables and block management
3. Stuff for the S3 API
2020-04-18 19:39:57 +02:00
bd1618e78e
Remove proto.rs & move some definitions out of data.rs
2020-04-18 19:30:05 +02:00
f41583e1b7
Massive RPC refactoring
2020-04-18 19:21:34 +02:00
3f40ef149f
Fix sync: use max root checksum level
2020-04-17 21:59:07 +02:00
f62b54f1df
Fix add to resync on incref
2020-04-17 21:14:06 +02:00
ace07da7c1
Fix walk_ring_from
2020-04-17 21:08:43 +02:00
40c48e6a59
Several resync workers; add delay on retry resync
2020-04-17 20:58:10 +02:00
29a1e94f23
Implement missing handler for read_range
2020-04-17 19:38:47 +02:00
b4e96bdcf0
Fix paths :o
2020-04-17 19:20:17 +02:00
4abfb75509
Implement sending blocks to nodes that need them
2020-04-17 19:16:08 +02:00
db1c4222ce
Don't send items...
...
...if syncer doesn't need them because he's going to delete the partition anyway.
Also, fix block resync queue
2020-04-17 18:51:29 +02:00
4bacaaf53f
Resync block on read error
2020-04-17 18:38:11 +02:00
b780f6485d
Make sync send data both ways
2020-04-17 18:27:29 +02:00
69f1d8fef2
WIP
...
TODOs:
- ensure sync goes both way
- finish sending blocks to other nodes when they need them before deleting
2020-04-17 17:09:57 +02:00
e41ce4d815
Implement getting missing blocks when RC increases
...
Issue: RC increases also when the block ref entry is first put by the actual client.
At that point the client is probably already sending us the block content,
so we don't need to do a get...
We should add a delay before the task is added or find something to do.
2020-04-17 15:40:13 +02:00
867646093b
Table range deletion
2020-04-17 14:49:10 +02:00
6ce14e2c9e
Make all requests continue in the background even after we got enough responses.
2020-04-16 23:13:15 +02:00
768d22ccdb
Better prints again, and a great question
2020-04-16 19:57:13 +02:00
2a05fd135a
Change debug prints a bit
2020-04-16 19:37:08 +02:00
2f3b1a072f
WIP
2020-04-16 19:28:02 +02:00
2832be4396
WIP
2020-04-16 18:41:10 +02:00
e8d750175d
Implement ring comparison algorithm
2020-04-16 17:04:28 +02:00
f01c1e71b5
Begin work on sync...
2020-04-16 14:50:49 +02:00
43ce5e4ab4
Fix table RPC to not be interruptible
2020-04-12 23:05:53 +02:00
2bea76ce16
Small refactorings
2020-04-12 22:24:53 +02:00
9f8b3b5a18
TLS for command line client
2020-04-12 19:41:19 +02:00
c788fc9f9e
Cleanup
2020-04-12 19:18:31 +02:00
d2814b5c33
TLS works \o/
...
So, the issues were:
- webpki does not support IP addresses as DNS names in URLs,
so I hacked the HttpsConnector to always provide a fixed string
as the DNS name for server certificate validation
- the certificate requied a SAN section which was complicated to build
but eventually the solution is there in genkeys.sh
2020-04-12 19:00:30 +02:00
d1e8f78b2c
Trying to do TLS
2020-04-12 15:51:19 +02:00
5967c5a5af
Refactor a bit
2020-04-12 13:03:55 +02:00
419c70e506
fixes
...
- make block_put call uninterruptible by client
- used meta_replication_factor instead of data_replication_factor
- listen on ipv6
2020-04-12 12:10:33 +02:00
9c931f5eda
Keep network status & ring in a tokio::sync::watch
...
advantages
- reads don't prevent preparing writes
- can be followed from other parts of the system by cloning the receiver
2020-04-11 23:53:32 +02:00
5dd59e437d
Local refcounting of blocks
2020-04-11 23:00:26 +02:00
dcf58499a4
table::insert_many, version_table::updated
2020-04-11 19:43:29 +02:00
53289b69e5
Background task runner that replaces tokio::spawn
2020-04-11 18:51:11 +02:00
4a2624b76a
We don't want the debugging to fail, actually.
2020-04-10 23:43:35 +02:00
cf8fd948fc
Add block ref table
2020-04-10 23:11:52 +02:00
ff4fb97568
(Try to) disable LTO ?
2020-04-10 22:55:01 +02:00
a50f07dfdc
Refactor
2020-04-10 22:26:48 +02:00
3477864142
Fix the Sync issue. Details:
...
So the HTTP client future of Hyper is not Sync, thus the stream
that read blocks wasn't either. However Hyper's default Body type
requires a stream to be Sync for wrap_stream. Solution: reimplement
a custom HTTP body type.
2020-04-10 22:01:48 +02:00
d66c0d6833
Why is it not Sync??
2020-04-09 23:45:07 +02:00
a3eb88e601
Locally, transactions
2020-04-09 20:58:39 +02:00
1d786c2c66
Something works
2020-04-09 18:43:53 +02:00
101444abb3
Some progress
2020-04-09 17:32:28 +02:00
4c1aee42d5
Reorganize table API
2020-04-09 16:16:27 +02:00
a450103ed0
Work & TODO
2020-04-08 23:47:34 +02:00
cc580da0ae
Some work
2020-04-08 23:01:49 +02:00
bacc76a057
Some work in actually storing things
2020-04-08 22:00:41 +02:00
d50edcdb4f
Basic workflow for client PUT, next is do actual storage
2020-04-08 00:39:07 +02:00
90cdffb425
custom data type for hashes and identifiers
2020-04-07 18:10:20 +02:00
82b7fcd280
Config management & ring
2020-04-07 17:00:48 +02:00
061e676136
Refactor; ability to update network config
2020-04-07 16:26:22 +02:00
46d5b896e8
Fix pinging
2020-04-07 00:00:43 +02:00
a7b85146fe
Forgot to recalculate hash at strategic locations
2020-04-06 23:10:54 +02:00
a09f019cc5
Seems to be fixed
2020-04-06 22:54:03 +02:00
87f2b4d2fc
Ununderstandable error
2020-04-06 22:27:51 +02:00
3c36b449a3
Some work
2020-04-06 21:02:15 +02:00
1a5e6e39af
Some more basic work
2020-04-06 19:55:39 +02:00
7102db1d54
First commit: skeleton for something great
2020-04-05 23:33:42 +02:00
