garage/doc/book/src/quick_start/index.md

7.1 KiB

Quick Start

Let's start your Garage journey! In this chapter, we explain how to deploy Garage as a single-node server and how to interact with it.

Our goal is to introduce you to Garage's workflows. Following this guide is recommended before moving on to configuring a real-world deployment.

Note that this kind of deployment should not be used in production, as it provides no redundancy for your data! We will also skip intra-cluster TLS configuration, meaning that if you add nodes to your cluster, communication between them will not be secure.

Get a binary

Download the latest Garage binary from the release pages on our repository:

https://git.deuxfleurs.fr/Deuxfleurs/garage/releases

Place this binary somewhere in your $PATH so that you can invoke the garage command directly (for instance you can copy the binary in /usr/local/bin or in ~/.local/bin).

If a binary of the last version is not available for your architecture, you can build Garage from source.

Writing a first configuration file

This first configuration file should allow you to get started easily with the simplest possible Garage deployment:

metadata_dir = "/tmp/meta"
data_dir = "/tmp/data"

replication_mode = "none"

rpc_bind_addr = "[::]:3901"

bootstrap_peers = []

[s3_api]
s3_region = "garage"
api_bind_addr = "[::]:3900"

[s3_web]
bind_addr = "[::]:3902"
root_domain = ".web.garage"
index = "index.html"

Save your configuration file as garage.toml.

As you can see in the metadata_dir and data_dir parameters, we are saving Garage's data in /tmp which gets erased when your system reboots. This means that data stored on this Garage server will not be persistent. Change these to locations on your local disk if you want your data to be persisted properly.

Launching the Garage server

Use the following command to launch the Garage server with our configuration file:

RUST_LOG=garage=info garage server -c garage.toml

You can tune Garage's verbosity as follows (from less verbose to more verbose):

RUST_LOG=garage=info garage server -c garage.toml
RUST_LOG=garage=debug garage server -c garage.toml
RUST_LOG=garage=trace garage server -c garage.toml

Log level info is recommended for most use cases. Log level debug can help you check why your S3 API calls are not working.

Checking that Garage runs correctly

The garage utility is also used as a CLI tool to configure your Garage deployment. It tries to connect to a Garage server through the RPC protocol, by default looking for a Garage server at localhost:3901.

Since our deployment already binds to port 3901, the following command should be sufficient to show Garage's status:

garage status

This should show something like this:

Healthy nodes:
2a638ed6c775b69a…	linuxbox	127.0.0.1:3901	UNCONFIGURED/REMOVED

Configuring your Garage node

Configuring the nodes in a Garage deployment means informing Garage of the disk space available on each node of the cluster as well as the zone (e.g. datacenter) each machine is located in.

For our test deployment, we are using only one node. The way in which we configure it does not matter, you can simply write:

garage node configure -z dc1 -c 1 <node_id>

where <node_id> corresponds to the identifier of the node shown by garage status (first column). You can enter simply a prefix of that identifier. For instance here you could write just garage node configure -z dc1 -c 1 2a63.

Creating buckets and keys

In this section, we will suppose that we want to create a bucket named nextcloud-bucket that will be accessed through a key named nextcloud-app-key.

Don't forget that help command and --help subcommands can help you anywhere, the CLI tool is self-documented! Two examples:

garage help
garage bucket allow --help

Create a bucket

Let's take an example where we want to deploy NextCloud using Garage as the main data storage.

First, create a bucket with the following command:

garage bucket create nextcloud-bucket

Check that everything went well:

garage bucket list
garage bucket info nextcloud-bucket

Create an API key

The nextcloud-bucket bucket now exists on the Garage server, however it cannot be accessed until we add an API key with the proper access rights.

Note that API keys are independent of buckets: one key can access multiple buckets, multiple keys can access one bucket.

Create an API key using the following command:

garage key new --name nextcloud-app-key

The output should look as follows:

Key name: nextcloud-app-key
Key ID: GK3515373e4c851ebaad366558
Secret key: 7d37d093435a41f2aab8f13c19ba067d9776c90215f56614adad6ece597dbb34
Authorized buckets:

Check that everything works as intended:

garage key list
garage key info nextcloud-app-key

Allow a key to access a bucket

Now that we have a bucket and a key, we need to give permissions to the key on the bucket:

garage bucket allow \
  --read \
  --write 
  nextcloud-bucket \
  --key nextcloud-app-key

You can check at any time the allowed keys on your bucket with:

garage bucket info nextcloud-bucket

Uploading and downlading from Garage

We recommend the use of MinIO Client to interact with Garage files (mc). Instructions to install it and use it are provided on the MinIO website. Before reading the following, you need a working mc command on your path.

Note that on certain Linux distributions such as Arch Linux, the Minio client binary is called mcli instead of mc (to avoid name clashes with the Midnight Commander).

Configure mc

You need your access key and secret key created above. We will assume you are invoking mc on the same machine as the Garage server, your S3 API endpoint is therefore http://127.0.0.1:3900. For this whole configuration, you must set an alias name: we chose my-garage, that you will used for all commands.

Adapt the following command accordingly and run it:

mc alias set \
  my-garage \
  http://127.0.0.1:3900 \
  <access key> \
  <secret key> \
  --api S3v4

You must also add an environment variable to your configuration to inform MinIO of our region (garage by default, corresponding to the s3_region parameter in the configuration file). The best way is to add the following snippet to your $HOME/.bash_profile or $HOME/.bashrc file:

export MC_REGION=garage

Use mc

You can not list buckets from mc currently.

But the following commands and many more should work:

mc cp image.png my-garage/nextcloud-bucket
mc cp my-garage/nextcloud-bucket/image.png .
mc ls my-garage/nextcloud-bucket
mc mirror localdir/ my-garage/another-bucket

Other tools for interacting with Garage

The following tools can also be used to send and recieve files from/to Garage:

Refer to the "configuring clients" page to learn how to configure these clients to interact with a Garage server.