doc/optimal_layout_report/optimal_layout.aux

@@ -0,0 +1,32 @@
+\relax 
+\@writefile{toc}{\contentsline {section}{\numberline {1}Introduction}{1}{}\protected@file@percent }
+\@writefile{toc}{\contentsline {subsection}{\numberline {1.1}Context}{1}{}\protected@file@percent }
+\@writefile{toc}{\contentsline {subsection}{\numberline {1.2}Formal description of the problem}{1}{}\protected@file@percent }
+\newlabel{eq:optimal}{{{OPT}}{1}}
+\@writefile{toc}{\contentsline {section}{\numberline {2}Properties of an optimal 3-strict assignment}{2}{}\protected@file@percent }
+\@writefile{toc}{\contentsline {subsection}{\numberline {2.1}Optimal assignment}{2}{}\protected@file@percent }
+\newlabel{sec:opt_assign}{{2.1}{2}}
+\@writefile{lof}{\contentsline {figure}{\numberline {1}{\ignorespaces On the left, the creation of a concrete assignment with the naive approach of repeating tokens. On the right, the zones containing the nodes.}}{4}{}\protected@file@percent }
+\@writefile{lof}{\contentsline {figure}{\numberline {2}{\ignorespaces Flow problem to compute and optimal assignment.}}{4}{}\protected@file@percent }
+\@writefile{toc}{\contentsline {subsection}{\numberline {2.2}Minimal transfer}{5}{}\protected@file@percent }
+\newlabel{hyp:A}{{{H3A}}{5}}
+\newlabel{hyp:B}{{{H3B}}{5}}
+\@writefile{toc}{\contentsline {subsubsection}{\numberline {A)}Minimizing the zone discrepancy}{6}{}\protected@file@percent }
+\@writefile{lof}{\contentsline {figure}{\numberline {3}{\ignorespaces On the left: the graph $G_T$ encoding an assignment to minimize the zone discrepancy. On the right: the graph $G_T$ encoding an assignment to minimize the node discrepancy.}}{7}{}\protected@file@percent }
+\@writefile{toc}{\contentsline {subsubsection}{\numberline {B)}Minimizing the node discrepancy}{8}{}\protected@file@percent }
+\@writefile{toc}{\contentsline {subsubsection}{\numberline {C)}Linear combination of both criteria}{8}{}\protected@file@percent }
+\@writefile{toc}{\contentsline {subsection}{\numberline {2.3}Algorithm}{9}{}\protected@file@percent }
+\@writefile{loa}{\contentsline {algorithm}{\numberline {1}{\ignorespaces Optimal 3-strict assignment}}{9}{}\protected@file@percent }
+\newlabel{alg:total}{{1}{9}}
+\@writefile{toc}{\contentsline {section}{\numberline {3}TODO}{9}{}\protected@file@percent }
+\@writefile{loa}{\contentsline {algorithm}{\numberline {2}{\ignorespaces Computation of the optimal utilization}}{10}{}\protected@file@percent }
+\newlabel{alg:util}{{2}{10}}
+\newlabel{lin:subutil}{{2}{10}}
+\newlabel{lin:loopsub}{{3}{10}}
+\newlabel{lin:findmin}{{4}{10}}
+\@writefile{loa}{\contentsline {algorithm}{\numberline {3}{\ignorespaces Computation of a candidate assignment}}{10}{}\protected@file@percent }
+\newlabel{alg:opt}{{3}{10}}
+\@writefile{loa}{\contentsline {algorithm}{\numberline {4}{\ignorespaces Minimization of the number of transfers}}{11}{}\protected@file@percent }
+\newlabel{alg:mini}{{4}{11}}
+\newlabel{lin:repeat}{{3}{11}}
+\gdef \@abspage@last{11}

doc/optimal_layout_report/optimal_layout.log

@@ -0,0 +1,303 @@
+This is pdfTeX, Version 3.14159265-2.6-1.40.21 (TeX Live 2020/Debian) (preloaded format=pdflatex 2022.6.23)  18 JUL 2022 22:33
+entering extended mode
+ restricted \write18 enabled.
+ %&-line parsing enabled.
+**optimal_layout.tex
+(./optimal_layout.tex
+LaTeX2e <2020-10-01> patch level 4
+L3 programming layer <2021-01-09> xparse <2020-03-03>
+(/usr/share/texlive/texmf-dist/tex/latex/base/article.cls
+Document Class: article 2020/04/10 v1.4m Standard LaTeX document class
+(/usr/share/texlive/texmf-dist/tex/latex/base/size10.clo
+File: size10.clo 2020/04/10 v1.4m Standard LaTeX file (size option)
+)
+\c@part=\count177
+\c@section=\count178
+\c@subsection=\count179
+\c@subsubsection=\count180
+\c@paragraph=\count181
+\c@subparagraph=\count182
+\c@figure=\count183
+\c@table=\count184
+\abovecaptionskip=\skip47
+\belowcaptionskip=\skip48
+\bibindent=\dimen138
+)
+(/usr/share/texlive/texmf-dist/tex/latex/amsmath/amsmath.sty
+Package: amsmath 2020/09/23 v2.17i AMS math features
+\@mathmargin=\skip49
+
+For additional information on amsmath, use the `?' option.
+(/usr/share/texlive/texmf-dist/tex/latex/amsmath/amstext.sty
+Package: amstext 2000/06/29 v2.01 AMS text
+
+(/usr/share/texlive/texmf-dist/tex/latex/amsmath/amsgen.sty
+File: amsgen.sty 1999/11/30 v2.0 generic functions
+\@emptytoks=\toks15
+\ex@=\dimen139
+))
+(/usr/share/texlive/texmf-dist/tex/latex/amsmath/amsbsy.sty
+Package: amsbsy 1999/11/29 v1.2d Bold Symbols
+\pmbraise@=\dimen140
+)
+(/usr/share/texlive/texmf-dist/tex/latex/amsmath/amsopn.sty
+Package: amsopn 2016/03/08 v2.02 operator names
+)
+\inf@bad=\count185
+LaTeX Info: Redefining \frac on input line 234.
+\uproot@=\count186
+\leftroot@=\count187
+LaTeX Info: Redefining \overline on input line 399.
+\classnum@=\count188
+\DOTSCASE@=\count189
+LaTeX Info: Redefining \ldots on input line 496.
+LaTeX Info: Redefining \dots on input line 499.
+LaTeX Info: Redefining \cdots on input line 620.
+\Mathstrutbox@=\box47
+\strutbox@=\box48
+\big@size=\dimen141
+LaTeX Font Info:    Redeclaring font encoding OML on input line 743.
+LaTeX Font Info:    Redeclaring font encoding OMS on input line 744.
+\macc@depth=\count190
+\c@MaxMatrixCols=\count191
+\dotsspace@=\muskip16
+\c@parentequation=\count192
+\dspbrk@lvl=\count193
+\tag@help=\toks16
+\row@=\count194
+\column@=\count195
+\maxfields@=\count196
+\andhelp@=\toks17
+\eqnshift@=\dimen142
+\alignsep@=\dimen143
+\tagshift@=\dimen144
+\tagwidth@=\dimen145
+\totwidth@=\dimen146
+\lineht@=\dimen147
+\@envbody=\toks18
+\multlinegap=\skip50
+\multlinetaggap=\skip51
+\mathdisplay@stack=\toks19
+LaTeX Info: Redefining \[ on input line 2923.
+LaTeX Info: Redefining \] on input line 2924.
+)
+(/usr/share/texlive/texmf-dist/tex/latex/amsfonts/amssymb.sty
+Package: amssymb 2013/01/14 v3.01 AMS font symbols
+
+(/usr/share/texlive/texmf-dist/tex/latex/amsfonts/amsfonts.sty
+Package: amsfonts 2013/01/14 v3.01 Basic AMSFonts support
+\symAMSa=\mathgroup4
+\symAMSb=\mathgroup5
+LaTeX Font Info:    Redeclaring math symbol \hbar on input line 98.
+LaTeX Font Info:    Overwriting math alphabet `\mathfrak' in version `bold'
+(Font)                  U/euf/m/n --> U/euf/b/n on input line 106.
+))
+(/usr/share/texlive/texmf-dist/tex/latex/graphics/graphicx.sty
+Package: graphicx 2020/09/09 v1.2b Enhanced LaTeX Graphics (DPC,SPQR)
+
+(/usr/share/texlive/texmf-dist/tex/latex/graphics/keyval.sty
+Package: keyval 2014/10/28 v1.15 key=value parser (DPC)
+\KV@toks@=\toks20
+)
+(/usr/share/texlive/texmf-dist/tex/latex/graphics/graphics.sty
+Package: graphics 2020/08/30 v1.4c Standard LaTeX Graphics (DPC,SPQR)
+
+(/usr/share/texlive/texmf-dist/tex/latex/graphics/trig.sty
+Package: trig 2016/01/03 v1.10 sin cos tan (DPC)
+)
+(/usr/share/texlive/texmf-dist/tex/latex/graphics-cfg/graphics.cfg
+File: graphics.cfg 2016/06/04 v1.11 sample graphics configuration
+)
+Package graphics Info: Driver file: pdftex.def on input line 105.
+
+(/usr/share/texlive/texmf-dist/tex/latex/graphics-def/pdftex.def
+File: pdftex.def 2020/10/05 v1.2a Graphics/color driver for pdftex
+))
+\Gin@req@height=\dimen148
+\Gin@req@width=\dimen149
+)
+(/usr/share/texlive/texmf-dist/tex/latex/xcolor/xcolor.sty
+Package: xcolor 2016/05/11 v2.12 LaTeX color extensions (UK)
+
+(/usr/share/texlive/texmf-dist/tex/latex/graphics-cfg/color.cfg
+File: color.cfg 2016/01/02 v1.6 sample color configuration
+)
+Package xcolor Info: Driver file: pdftex.def on input line 225.
+Package xcolor Info: Model `cmy' substituted by `cmy0' on input line 1348.
+Package xcolor Info: Model `hsb' substituted by `rgb' on input line 1352.
+Package xcolor Info: Model `RGB' extended on input line 1364.
+Package xcolor Info: Model `HTML' substituted by `rgb' on input line 1366.
+Package xcolor Info: Model `Hsb' substituted by `hsb' on input line 1367.
+Package xcolor Info: Model `tHsb' substituted by `hsb' on input line 1368.
+Package xcolor Info: Model `HSB' substituted by `hsb' on input line 1369.
+Package xcolor Info: Model `Gray' substituted by `gray' on input line 1370.
+Package xcolor Info: Model `wave' substituted by `hsb' on input line 1371.
+)
+(/usr/share/texlive/texmf-dist/tex/latex/algorithms/algorithm.sty
+Package: algorithm 2009/08/24 v0.1 Document Style `algorithm' - floating enviro
+nment
+
+(/usr/share/texlive/texmf-dist/tex/latex/float/float.sty
+Package: float 2001/11/08 v1.3d Float enhancements (AL)
+\c@float@type=\count197
+\float@exts=\toks21
+\float@box=\box49
+\@float@everytoks=\toks22
+\@floatcapt=\box50
+)
+(/usr/share/texlive/texmf-dist/tex/latex/base/ifthen.sty
+Package: ifthen 2014/09/29 v1.1c Standard LaTeX ifthen package (DPC)
+)
+\@float@every@algorithm=\toks23
+\c@algorithm=\count198
+)
+(/usr/share/texlive/texmf-dist/tex/latex/algorithmicx/algpseudocode.sty
+Package: algpseudocode 
+
+(/usr/share/texlive/texmf-dist/tex/latex/algorithmicx/algorithmicx.sty
+Package: algorithmicx 2005/04/27 v1.2 Algorithmicx
+
+Document Style algorithmicx 1.2 - a greatly improved `algorithmic' style
+\c@ALG@line=\count199
+\c@ALG@rem=\count266
+\c@ALG@nested=\count267
+\ALG@tlm=\skip52
+\ALG@thistlm=\skip53
+\c@ALG@Lnr=\count268
+\c@ALG@blocknr=\count269
+\c@ALG@storecount=\count270
+\c@ALG@tmpcounter=\count271
+\ALG@tmplength=\skip54
+)
+Document Style - pseudocode environments for use with the `algorithmicx' style
+) (/usr/share/texlive/texmf-dist/tex/latex/l3backend/l3backend-pdftex.def
+File: l3backend-pdftex.def 2020-01-29 L3 backend support: PDF output (pdfTeX)
+\l__color_backend_stack_int=\count272
+\l__pdf_internal_box=\box51
+)
+(./optimal_layout.aux)
+\openout1 = `optimal_layout.aux'.
+
+LaTeX Font Info:    Checking defaults for OML/cmm/m/it on input line 15.
+LaTeX Font Info:    ... okay on input line 15.
+LaTeX Font Info:    Checking defaults for OMS/cmsy/m/n on input line 15.
+LaTeX Font Info:    ... okay on input line 15.
+LaTeX Font Info:    Checking defaults for OT1/cmr/m/n on input line 15.
+LaTeX Font Info:    ... okay on input line 15.
+LaTeX Font Info:    Checking defaults for T1/cmr/m/n on input line 15.
+LaTeX Font Info:    ... okay on input line 15.
+LaTeX Font Info:    Checking defaults for TS1/cmr/m/n on input line 15.
+LaTeX Font Info:    ... okay on input line 15.
+LaTeX Font Info:    Checking defaults for OMX/cmex/m/n on input line 15.
+LaTeX Font Info:    ... okay on input line 15.
+LaTeX Font Info:    Checking defaults for U/cmr/m/n on input line 15.
+LaTeX Font Info:    ... okay on input line 15.
+
+(/usr/share/texlive/texmf-dist/tex/context/base/mkii/supp-pdf.mkii
+[Loading MPS to PDF converter (version 2006.09.02).]
+\scratchcounter=\count273
+\scratchdimen=\dimen150
+\scratchbox=\box52
+\nofMPsegments=\count274
+\nofMParguments=\count275
+\everyMPshowfont=\toks24
+\MPscratchCnt=\count276
+\MPscratchDim=\dimen151
+\MPnumerator=\count277
+\makeMPintoPDFobject=\count278
+\everyMPtoPDFconversion=\toks25
+) (/usr/share/texlive/texmf-dist/tex/latex/epstopdf-pkg/epstopdf-base.sty
+Package: epstopdf-base 2020-01-24 v2.11 Base part for package epstopdf
+Package epstopdf-base Info: Redefining graphics rule for `.eps' on input line 4
+85.
+
+(/usr/share/texlive/texmf-dist/tex/latex/latexconfig/epstopdf-sys.cfg
+File: epstopdf-sys.cfg 2010/07/13 v1.3 Configuration of (r)epstopdf for TeX Liv
+e
+))
+LaTeX Font Info:    Trying to load font information for U+msa on input line 17.
+
+
+(/usr/share/texlive/texmf-dist/tex/latex/amsfonts/umsa.fd
+File: umsa.fd 2013/01/14 v3.01 AMS symbols A
+)
+LaTeX Font Info:    Trying to load font information for U+msb on input line 17.
+
+
+(/usr/share/texlive/texmf-dist/tex/latex/amsfonts/umsb.fd
+File: umsb.fd 2013/01/14 v3.01 AMS symbols B
+) [1
+
+{/var/lib/texmf/fonts/map/pdftex/updmap/pdftex.map}] [2]
+<figures/naive.pdf, id=23, 248.75592pt x 93.43271pt>
+File: figures/naive.pdf Graphic file (type pdf)
+<use figures/naive.pdf>
+Package pdftex.def Info: figures/naive.pdf  used on input line 117.
+(pdftex.def)             Requested size: 310.4979pt x 116.6252pt.
+ [3]
+<figures/flow.pdf, id=29, 263.10938pt x 133.389pt>
+File: figures/flow.pdf Graphic file (type pdf)
+<use figures/flow.pdf>
+Package pdftex.def Info: figures/flow.pdf  used on input line 136.
+(pdftex.def)             Requested size: 207.0021pt x 104.94873pt.
+ [4 <./figures/naive.pdf> <./figures/flow.pdf
+
+pdfTeX warning: /usr/bin/pdflatex (file ./figures/flow.pdf): PDF inclusion: mul
+tiple pdfs with page group included in a single page
+>] [5]
+<figures/mini_zone.pdf, id=40, 106.06543pt x 133.44284pt>
+File: figures/mini_zone.pdf Graphic file (type pdf)
+<use figures/mini_zone.pdf>
+Package pdftex.def Info: figures/mini_zone.pdf  used on input line 221.
+(pdftex.def)             Requested size: 110.39873pt x 138.8974pt.
+<figures/mini_node.pdf, id=41, 183.67638pt x 190.3113pt>
+File: figures/mini_node.pdf Graphic file (type pdf)
+<use figures/mini_node.pdf>
+Package pdftex.def Info: figures/mini_node.pdf  used on input line 225.
+(pdftex.def)             Requested size: 151.8014pt x 157.28752pt.
+ [6]
+Overfull \hbox (6.52959pt too wide) in paragraph at lines 239--240
+[]\OT1/cmr/m/n/10 Assume that their ex-ist some as-sign-ment $\OML/cmm/m/it/10 
+T[]$ \OT1/cmr/m/n/10 with the same uti-liza-tion $(\OML/cmm/m/it/10 n[]\OT1/cmr
+/m/n/10 )[]$.
+ []
+
+[7 <./figures/mini_zone.pdf> <./figures/mini_node.pdf
+
+pdfTeX warning: /usr/bin/pdflatex (file ./figures/mini_node.pdf): PDF inclusion
+: multiple pdfs with page group included in a single page
+>] [8] [9] [10] [11] (./optimal_layout.aux) ) 
+Here is how much of TeX's memory you used:
+ 3544 strings out of 481176
+ 47263 string characters out of 5914226
+ 339215 words of memory out of 5000000
+ 20458 multiletter control sequences out of 15000+600000
+ 413592 words of font info for 65 fonts, out of 8000000 for 9000
+ 59 hyphenation exceptions out of 8191
+ 68i,12n,74p,880b,308s stack positions out of 5000i,500n,10000p,200000b,80000s
+ </home/netko/.texlive2020/texmf-v
+ar/fonts/pk/ljfour/jknappen/ec/tcrm1000.600pk></usr/share/texlive/texmf-dist/fo
+nts/type1/public/amsfonts/cm/cmbx10.pfb></usr/share/texlive/texmf-dist/fonts/ty
+pe1/public/amsfonts/cm/cmbx12.pfb></usr/share/texlive/texmf-dist/fonts/type1/pu
+blic/amsfonts/cm/cmcsc10.pfb></usr/share/texlive/texmf-dist/fonts/type1/public/
+amsfonts/cm/cmex10.pfb></usr/share/texlive/texmf-dist/fonts/type1/public/amsfon
+ts/cm/cmmi10.pfb></usr/share/texlive/texmf-dist/fonts/type1/public/amsfonts/cm/
+cmmi5.pfb></usr/share/texlive/texmf-dist/fonts/type1/public/amsfonts/cm/cmmi7.p
+fb></usr/share/texlive/texmf-dist/fonts/type1/public/amsfonts/cm/cmr10.pfb></us
+r/share/texlive/texmf-dist/fonts/type1/public/amsfonts/cm/cmr12.pfb></usr/share
+/texlive/texmf-dist/fonts/type1/public/amsfonts/cm/cmr17.pfb></usr/share/texliv
+e/texmf-dist/fonts/type1/public/amsfonts/cm/cmr5.pfb></usr/share/texlive/texmf-
+dist/fonts/type1/public/amsfonts/cm/cmr7.pfb></usr/share/texlive/texmf-dist/fon
+ts/type1/public/amsfonts/cm/cmr8.pfb></usr/share/texlive/texmf-dist/fonts/type1
+/public/amsfonts/cm/cmsy10.pfb></usr/share/texlive/texmf-dist/fonts/type1/publi
+c/amsfonts/cm/cmsy5.pfb></usr/share/texlive/texmf-dist/fonts/type1/public/amsfo
+nts/cm/cmsy7.pfb></usr/share/texlive/texmf-dist/fonts/type1/public/amsfonts/cm/
+cmti10.pfb></usr/share/texlive/texmf-dist/fonts/type1/public/amsfonts/symbols/m
+sbm10.pfb>
+Output written on optimal_layout.pdf (11 pages, 279062 bytes).
+PDF statistics:
+ 127 PDF objects out of 1000 (max. 8388607)
+ 90 compressed objects within 1 object stream
+ 0 named destinations out of 1000 (max. 500000)
+ 21 words of extra memory for PDF output out of 10000 (max. 10000000)
+

doc/optimal_layout_report/optimal_layout.tex

@@ -0,0 +1,394 @@
+\documentclass[]{article}
+
+\usepackage{amsmath,amssymb}
+
+\usepackage{graphicx,xcolor}
+
+\usepackage{algorithm,algpseudocode,float} 
+
+\renewcommand\thesubsubsection{\Alph{subsubsection})}
+
+%opening
+\title{Optimal partition assignment in Garage}
+\author{Mendes Oulamara}
+
+\begin{document}
+
+\maketitle
+
+\section{Introduction}
+
+\subsection{Context}
+
+Garage is an open-source distributed storage service blablabla$\dots$
+
+Every object to be stored in the system falls in a partition given by the last $k$ bits of its hash. There are $N=2^k$ partitions. Every partition will be stored on distinct nodes of the system. The goal of the assignment of partitions to nodes is to ensure (nodes and zone) redundancy and to be as efficient as possible.
+
+\subsection{Formal description of the problem}
+
+We are given a set of nodes $V$ and a set of zones $Z$. Every node $v$ has a non-negative storage capacity $c_v\ge 0$ and belongs to a zone $z_v\in Z$. We are also given a number of partition $N>0$ (typically $N=256$).
+
+We would like to compute an assignment of three nodes to every partition. That is, for every $1\le i\le N$, we compute a triplet of three distinct nodes $T_i=(T_i^1, T_i^2, T_i^3) \in V^3$. We will impose some redundancy constraints to this assignment, and under these constraints, we want our system to have the largest storage capacity possible. To link storage capacity to partition assignment, we make the following assumption:
+\begin{equation}
+	\tag{H1}
+	\text{\emph{All partitions have the same size $s$.}}
+\end{equation}
+This assumption is justified by the dispersion of the hashing function, when the number of partitions is small relative to the number of stored large objects.
+
+Every node $v$ needs to store $n_v = \#\{ 1\le i\le N ~|~ v\in T_i \}$ partitions (where $\#$ denots the number of indices in the set). Hence the partitions stored by $v$ (and hence all partitions by our assumption) have there size bounded by $c_v/n_v$. This remark leads us to define the optimal size that we will want to maximize:
+
+\begin{equation}
+	\label{eq:optimal}
+	\tag{OPT}
+s^* = \min_{v \in V} \frac{c_v}{n_v}.
+\end{equation}
+
+When the capacities of the nodes are updated (this includes adding or removing a node), we want to update the assignment as well. However, transferring the data between nodes has a cost and we would like to limit the number of changes in the assignment. We make the following assumption:
+\begin{equation}
+	\tag{H2}
+	\text{\emph{Updates of capacity happens rarely relatively to object storing.}}
+\end{equation}
+This assumption justifies that when we compute the new assignment, it is worth to optimize the partition size \eqref{eq:optimal} first, and then, among the possible optimal solution, to try to minimize the number of partition transfers.
+
+For now, in the following, we ask the following redundancy constraint:
+
+\textbf{Mode 3-strict:}  every partition needs to be assignated to three nodes belonging to three different zones.
+
+\section{Properties of an optimal 3-strict assignment}
+
+\subsection{Optimal assignment}
+\label{sec:opt_assign}
+
+For every zone $z\in Z$, define the zone capacity $c_z = \sum_{v, z_v=z} c_v$ and define $C = \sum_v c_v = \sum_z c_z$.
+
+One can check that the best we could be doing to maximize $s^*$ would be to use the nodes proportionally to their capacity. This would yield $s^*=C/(3N)$. This is not possible because of (i) redundancy constraints and (ii) integer rounding but it gives and upper bound. 
+
+\subsubsection*{Optimal utilization}
+
+We call an \emph{utilization} a collection of non-negative integers $(n_v)_{v\in V}$ such that $\sum_v n_v = 3N$ and for every zone $z$, $\sum_{v\in z} n_v \le N$. We call such utilization \emph{optimal} if it maximizes $s^*$.
+
+We start by computing a node sub-utilization $(\hat{n}_v)_{v\in V}$ such that for every zone $z$, $\sum_{v\in z} \hat{n}_v \le N$ and we show that there is an optimal utilization respecting the constraints and such that $\hat{n}_v \le n_v$ for every node.
+
+Assume that there is a zone $z_0$ such that $c_{z_0}/C \ge 1/3$. Then for any $v\in z_0$, we define 
+$$\hat{n}_v = \left\lfloor\frac{c_v}{c_{z_0}}N\right\rfloor.$$ 
+This choice ensures for any such $v$ that
+$$
+\frac{c_v}{\hat{n}_v} \ge \frac{c_{z_0}}{N} \ge \frac{C}{3N}
+$$
+which is the universal upper bound on $s^*$. Hence any optimal utilization $(n_v)$ can be modified to another optimal utilization such that $n_v\ge \hat{n}_v$
+
+Because $z_0$ cannot store more than $N$ partition occurences, in any assignment, at least $2N$ partitions must be assignated to the zones $Z\setminus\{z_0\}$. Let $C_0 = C-c_{z_0}$. Suppose that there exists a zone $z_1\neq z_0$ such that $c_{z_1}/C_0 \ge 1/2$. Then, with the same argument as for $z_0$, we can define 
+$$\hat{n}_v = \left\lfloor\frac{c_v}{c_{z_1}}N\right\rfloor$$
+for every $v\in z_1$.
+
+Now we can assign the remaining partitions. Let $(\hat{N}, \hat{C})$ to be
+\begin{itemize}
+	\item $(3N,C)$ if we did not find any $z_0$;
+	\item $(2N,C-c_{z_0})$ if there was a $z_0$ but no $z_1$;
+	\item $(N,C-c_{z_0}-c_{z_1})$ if there was a $z_0$ and a $z_1$.
+\end{itemize}
+Then at least $\hat{N}$ partitions must be spread among the remaining zones. Hence $s^*$ is upper bounded by $\hat{C}/\hat{N}$ and without loss of generality, we can define, for every node that is not in $z_0$ nor $z_1$, 
+$$\hat{n}_v = \left\lfloor\frac{c_v}{\hat{C}}\hat{N}\right\rfloor.$$ 
+
+We constructed a sub-utilization $\hat{n}_v$. Now notice that $3N-\sum_v \hat{n}_v \le \# V$ where $\# V$ denotes the number of nodes. We can iteratively pick a node $v^*$ such that 
+\begin{itemize}
+	\item $\sum_{v\in z_{v^*}} \hat{n}_v < N$ where $z_{v^*}$ is the zone of $v^*$;
+	\item $v^*$ maximizes the quantity $c_v/(\hat{n}_v+1)$ among the vertices satisfying the first condition (i.e. not in a saturated zone).
+\end{itemize}
+We iterate these instructions until $\sum_v \hat{n}_v= 3N$, and at this stage we define $(n_v) = (\hat{n}_v)$. It is easy to prove by induction that at every step, there is an optimal utilization that is pointwise larger than $\hat{n}_v$, and in particular, that $(n_v)$ is optimal.
+
+\subsubsection*{Existence of an optimal assignment}
+
+As for now, the \emph{optimal utilization} that we obtained is just a vector of numbers and it is not clear that it can be realized as the utilization of some concrete assignment. Here is a way to get a concrete assignment.
+
+Define $3N$ tokens $t_1,\ldots, t_{3N}\in V$ as follows:
+\begin{itemize}
+	\item Enumerate the zones $z$ of $Z$ in any order;
+	\item enumerate the nodes $v$ of $z$ in any order;
+	\item repeat $n_v$ times the token $v$.
+\end{itemize} 
+Then for $1\le i \le N$, define the triplet $T_i$ to be 
+$(t_i, t_{i+N}, t_{i+2N})$. Since the same nodes of a zone appear contiguously, the three nodes of a triplet must belong to three distinct zones.
+
+However simple, this solution to go from an utilization to an assignment has the drawback of not spreading the triplets: a node will tend to be associated to the same two other nodes for many partitions. Hence, during data transfer, it will tend to use only two link, instead of spreading the bandwith use over many other links to other nodes. To achieve this goal, we will reframe the search of an assignment as a flow problem. and in the flow algorithm, we will introduce randomness in the order of exploration. This will be sufficient to obtain a good dispersion of the triplets.
+
+\begin{figure}
+	\centering
+	\includegraphics[width=0.9\linewidth]{figures/naive}
+	\caption{On the left, the creation of a concrete assignment with the naive approach of repeating tokens. On the right, the zones containing the nodes.}
+\end{figure}
+
+\subsubsection*{Assignment as a maximum flow problem}
+
+We describe the flow problem via its graph $(X,E)$ where $X$ is a set of vertices, and $E$ are directed weighted edges between the vertices. For every zone $z$, define $n_z=\sum_{v\in z} n_v$.
+
+The set of vertices $X$ contains the source $\mathbf{s}$ and the sink $\mathbf{t}$; a vertex $\mathbf{x}_z$ for every zone $z\in Z$, and a vertex $\mathbf{y}_i$ for every partition index $1\le i\le N$. 
+
+The set of edges $E$ contains
+\begin{itemize}
+	\item the edge $(\mathbf{s}, \mathbf{x}_z, n_z)$ for every zone $z\in Z$;
+	\item the edge $(\mathbf{x}_z, \mathbf{y}_i, 1)$ for every zone $z\in Z$ and partition $1\le i\le N$;
+	\item the edge $(\mathbf{y}_i, \mathbf{t}, 3)$ for every partition $1\le i\le N$.
+\end{itemize}
+
+\begin{figure}[b]
+	\centering
+	\includegraphics[width=0.6\linewidth]{figures/flow}
+	\caption{Flow problem to compute and optimal assignment.}
+\end{figure}
+
+We first show the equivalence between this problem and and the construction of an assignment. Given some optimal assignment $(n_v)$, define the flow $f:E\to \mathbb{N}$ that saturates every edge from $\mathbf{s}$ or to $\mathbf{t}$, takes value $1$ on the edge between $\mathbf{x}_z$ and $\mathbf{y}_i$ if partition $i$ is stored in some node of the zone $z$, and $0$ otherwise. One can easily check that $f$ thus defined is indeed a flow and is maximum.
+
+Reciprocally, by the existence of maximum flows constructed from optimal assignments, any maximum flow must saturate the edges linked to the source or the sink. It can only take value 0 or 1 on the other edge, and every partition vertex is associated to exactly three distinct zone vertices. Every zone is associated to exactly $n_z$ partitions.
+
+A maximum flow can be constructed using, for instance, Dinic's algorithm. This algorithm works by discovering augmenting path to iteratively increase the flow. During the exploration of the graph to find augmenting path, we can shuffle the order of enumeration of the neighbours to spread the associations between zones and partitions.
+
+Once we have such association, we can randomly distribute the $n_z$ edges picked for every zone $z$ to its nodes $v\in z$ such that every such $v$ gets $n_z$ edges. This defines an optimal assignment of partitions to nodes.
+
+
+\subsection{Minimal transfer}
+
+Assume that there was a previous assignment $(T'_i)_{1\le i\le N}$ corresponding to utilizations $(n'_v)_{v\in V}$. We would like the new computed assignment $(T_i)_{1\le i\le N}$ from some $(n_v)_{v\in V}$ to minimize the number of partitions that need to be transferred. We can imagine two different objectives corresponding to different hypotheses: 
+\begin{equation}
+	\tag{H3A}
+	\label{hyp:A}
+	\text{\emph{Transfers between different zones cost much more than inside a zone.}}
+\end{equation}
+\begin{equation}
+	\tag{H3B}
+	\label{hyp:B}
+	\text{\emph{Changing zone is not the largest cost when transferring a partition.}}
+\end{equation}
+
+In case $A$, our goal will be to minimize the number of changes of zone in the assignment of partitions to zone. More formally, we will maximize the quantity
+$$
+Q_Z := 
+\sum_{1\le i\le N} 
+\#\{z\in Z ~|~ z\cap T_i \neq \emptyset, z\cap T'_i \neq \emptyset \}
+.$$
+
+In case $B$, our goal will be to minimize the number of changes of nodes in the assignment of partitions to nodes. We will maximize the quantity
+$$
+Q_V :=
+\sum_{1\le i\le N} \#(T_i \cap T'_i).
+$$
+
+It is tempting to hope that there is a way to maximize both quantity, that having the least discrepancy in terms of nodes will lead to the least discrepancy in terms of zones. But this is actually wrong! We propose the following counter-example to convince the reader:
+
+We consider eight nodes $a, a', b, c, d, d', e, e'$ belonging to five different zones $\{a,a'\}, \{b\}, \{c\}, \{d,d'\}, \{e, e'\}$. We take three partitions ($N=3$), that are originally assigned with some utilization $(n'_v)_{v\in V}$ as follows:
+$$
+T'_1=(a,b,c) \qquad
+T'_2=(a',b,d) \qquad 
+T'_3=(b,c,e).
+$$
+This assignment, with updated utilizations $(n_v)_{v\in V}$ minimizes the number of zone changes:
+$$
+T_1=(d,b,c) \qquad
+T_2=(a,b,d) \qquad 
+T_3=(b,c,e').
+$$
+This one, with the same utilization, minimizes the number of node changes:
+$$
+T_1=(a,b,c) \qquad
+T_2=(e',b,d) \qquad 
+T_3=(b,c,d').
+$$
+One can check that in this case, it is impossible to minimize both the number of zone and node changes.
+
+Because of the redundancy constraint, we cannot use a greedy algorithm to just replace nodes in the triplets to try to get the new utilization rate: this could lead to blocking situation where there is still a hole to fill in a triplet but no available node satisfies the zone separation constraint. To circumvent this issue, we propose an algorithm based on finding cycles in a graph encoding of the assignment. As in section \ref{sec:opt_assign}, we can explore the neigbours in a random order in the graph algorithms, to spread the triplets distribution.
+
+
+\subsubsection{Minimizing the zone discrepancy}
+
+
+First, notice that, given an assignment of partitions to \emph{zones}, it is easy to deduce an assignment to \emph{nodes} that minimizes the number of transfers for this zone assignment: For every zone $z$ and every node $v\in z$, pick in any way a set $P_v$ of partitions that where assigned to $v$ in $T'$, to $z_v$ in $T$, with the cardinality of $P_v$ smaller than $n_v$. Once all these sets are chosen, complement the assignment to reach the right utilization for every node. If $\#P_v > n_v$, it means that all the partitions that could stay in $v$ (i.e. that were already in $v$ and are still assigned to its zone) do stay in $v$. If $\#P_v = n_v$, then $n_v$ partitions stay in $v$, which is the number of partitions that need to be in $v$ in the end. In both cases, we could not hope for better given the partition to zone assignment.
+
+Our goal now is to find a assignment of partitions to zones that minimizes the number of zone transfers. To do so we are going to represent an assignment as a graph.
+
+Let $G_T=(X,E_T)$ be the directed weighted graph with vertices $(\mathbf{x}_i)_{1\le i\le N}$ and $(\mathbf{y}_z)_{z\in Z}$. For any $1\le i\le N$ and $z\in Z$, $E_T$ contains  the arc:
+\begin{itemize}
+	\item $(\mathbf{x}_i, \mathbf{y}_z, +1)$, if $z$ appears in $T_i'$ and $T_i$;
+	\item $(\mathbf{x}_i, \mathbf{y}_z, -1)$, if $z$ appears in $T_i$ but not in $T'_i$;
+	\item $(\mathbf{y}_z, \mathbf{x}_i, -1)$, if $z$ appears in $T'_i$ but not in $T_i$;
+	\item $(\mathbf{y}_z, \mathbf{x}_i, +1)$, if $z$ does not appear in $T'_i$ nor in $T_i$.
+\end{itemize}
+In other words, the orientation of the arc encodes whether partition $i$ is stored in zone $z$ in the assignment $T$ and the weight $\pm 1$ encodes whether this corresponds to what happens in the assignment $T'$.
+
+\begin{figure}[t]
+	\centering
+	\begin{minipage}{.40\linewidth}
+		\centering
+		\includegraphics[width=.8\linewidth]{figures/mini_zone}
+	\end{minipage}
+	\begin{minipage}{.55\linewidth}
+		\centering
+		\includegraphics[width=.8\linewidth]{figures/mini_node}
+	\end{minipage}
+	\caption{On the left: the graph $G_T$ encoding an assignment to minimize the zone discrepancy. On the right: the graph $G_T$ encoding an assignment to minimize the node discrepancy.}
+\end{figure}
+
+
+Notice that at every partition, there are three outgoing arcs, and at every zone, there are $n_z$ incoming arcs. Moreover, if $w(e)$ is the weight of an arc $e$, define the weight of $G_T$ by
+\begin{align*}
+w(G_T) := \sum_{e\in E} w(e) &= \#Z \times N - 4 \sum_{1\le i\le N} \#\{z\in Z ~|~ z\cap T_i = \emptyset, z\cap T'_i \neq \emptyset\}	\\
+&=\#Z \times N - 4 \sum_{1\le i\le N} 3- \#\{z\in Z ~|~ z\cap T_i \neq \emptyset, z\cap T'_i \neq \emptyset\} \\
+&= (\#Z-12)N + 4 Q_Z.
+\end{align*}
+Hence maximizing $Q_Z$ is equivalent to maximizing $w(G_T)$.
+
+Assume that their exist some assignment $T^*$ with the same utilization $(n_v)_{v\in V}$. Define $G_{T^*}$ similarly and consider the set $E_\mathrm{Diff} = E_T \setminus E_{T^*}$ of arcs that appear only in $G_T$. Since all vertices have the same number of incoming arcs in $G_T$ and $G_{T^*}$, the vertices of the graph $(X, E_\mathrm{Diff})$ must all have the same number number of incoming and outgoing arrows. So $E_\mathrm{Diff}$ can be expressed as a union of disjoint cycles. Moreover, the edges of $E_\mathrm{Diff}$ must appear in $E_{T^*}$ with reversed orientation and opposite weight. Hence, we have
+$$
+ w(G_T) - w(G_{T^*}) = 2 \sum_{e\in E_\mathrm{Diff}} w(e). 
+$$
+Hence, if $T$ is not optimal, there exists some $T^*$ with $w(G_T) < w(G_{T^*})$, and by the considerations above, there must exist a cycle in $E_\mathrm{Diff}$, and hence in $G_T$, with negative weight. If we reverse the edges and weights along this cycle, we obtain some graph. Since we did not change the incoming degree of any vertex, this is the graph encoding of some valid assignment $T^+$ such that $w(G_{T^+}) > w(G_T)$. We can iterate this operation until there is no other assignment $T^*$ with larger weight, that is until we obtain an optimal assignment.
+
+
+
+\subsubsection{Minimizing the node discrepancy}
+
+We will follow an approach similar to the one where we minimize the zone discrepancy. Here we will directly obtain a node assignment from a graph encoding.
+
+Let $G_T=(X,E_T)$ be the directed weighted graph with vertices $(\mathbf{x}_i)_{1\le i\le N}$, $(\mathbf{y}_{z,i})_{z\in Z, 1\le i\le N}$ and $(\mathbf{u}_v)_{v\in V}$. For any $1\le i\le N$ and $z\in Z$, $E_T$ contains  the arc:
+\begin{itemize}
+	\item $(\mathbf{x}_i, \mathbf{y}_{z,i}, 0)$, if $z$ appears in $T_i$;
+	\item $(\mathbf{y}_{z,i}, \mathbf{x}_i, 0)$, if $z$ does not appear in $T_i$.
+\end{itemize}
+For any $1\le i\le N$ and $v\in V$, $E_T$ contains  the arc:
+\begin{itemize}
+	\item $(\mathbf{y}_{z_v,i}, \mathbf{u}_v, +1)$, if $v$ appears in $T_i'$ and $T_i$;
+	\item $(\mathbf{y}_{z_v,i}, \mathbf{u}_v, -1)$, if $v$ appears in $T_i$ but not in $T'_i$;
+	\item $(\mathbf{u}_v, \mathbf{y}_{z_v,i}, -1)$, if $v$ appears in $T'_i$ but not in $T_i$;
+	\item $(\mathbf{u}_v, \mathbf{y}_{z_v,i}, +1)$, if $v$ does not appear in $T'_i$ nor in $T_i$.
+\end{itemize}
+Every vertex $\mathbb{x}_i$ has outgoing degree 3, every vertex $\mathbf{y}_{z,v}$ has outgoing degree 1, and every vertex $\mathbf{u}_v$ has incoming degree $n_v$. 
+Remark that any graph respecting these degree constraints is the encoding of a valid assignment with utilizations $(n_v)_{v\in V}$, in particular no partition is stored in two nodes of the same zone.
+
+We define $w(G_T)$ similarly:
+\begin{align*}
+	w(G_T) := \sum_{e\in E_T} w(e) &= \#V \times N - 4\sum_{1\le i\le N} 3-\#(T_i\cap T'_i) \\
+	&= (\#V-12)N + 4Q_V.
+\end{align*}
+
+Exactly like in the previous section, the existence of an assignment with larger weight implies the existence of a negatively weighted cycle in $G_T$. Reversing this cycle gives us the encoding of a valid assignment with a larger weight. Iterating this operation yields an optimal assignment.
+
+
+\subsubsection{Linear combination of both criteria}
+
+In the graph $G_T$ defined in the previous section, instead of having weights $0$ and $\pm 1$, we could be having weights $\pm\alpha$ between $\mathbf{x}$ and  $\mathbf{y}$ vertices, and weights $\pm\beta$ between $\mathbf{y}$ and  $\mathbf{u}$ vertices, for some $\alpha,\beta>0$ (we have positive weight if the assignment corresponds to $T'$ and negative otherwise). Then
+\begin{align*}
+	w(G_T) &= \sum_{e\in E_T} w(e) = 
+	\alpha \big( (\#Z-12)N + 4 Q_Z\big) + 
+	\beta \big( (\#V-12)N + 4 Q_V\big) \\
+	&= \mathrm{const}+ 4(\alpha Q_Z + \beta Q_V).
+\end{align*}
+So maximizing the weight of such graph encoding would be equivalent to maximizing a linear combination of $Q_Z$ and $Q_V$.
+
+
+\subsection{Algorithm}
+We give a high level description of the algorithm to compute an optimal 3-strict assignment. The operations appearing at lines 1,2,4 are respectively described by Algorithms \ref{alg:util},\ref{alg:opt} and \ref{alg:mini}.
+
+
+
+\begin{algorithm}[H]
+	\caption{Optimal 3-strict assignment}
+	\label{alg:total}
+	\begin{algorithmic}[1]
+	\Function{Optimal 3-strict assignment}{$N$, $(c_v)_{v\in V}$, $T'$}
+		\State $(n_v)_{v\in V} \leftarrow$ \Call{Compute optimal utilization}{$N$, $(c_v)_{v\in V}$}
+		\State $(T_i)_{1\le i\le N} \leftarrow$ \Call{Compute candidate assignment}{$N$, $(n_v)_{v\in V}$}
+		\If {there was a previous assignment $T'$}
+			\State $T \leftarrow$ \Call{Minimization of transfers}{$(T_i)_{1\le i\le N}$, $(T'_i)_{1\le i\le N}$}
+		\EndIf
+		\State \Return $T$.
+	\EndFunction
+	\end{algorithmic}
+\end{algorithm}
+
+We give some considerations of worst case complexity for these algorithms. In the following, we assume $N>\#V>\#Z$. The complexity of Algorithm \ref{alg:total} is $O(N^3\# Z)$ if we assume \eqref{hyp:A} and $O(N^3 \#Z \#V)$ if we assume \eqref{hyp:B}.
+
+Algorithm \ref{alg:util} can be implemented with complexity $O(\#V^2)$. The complexity of the function call at line \ref{lin:subutil} is $O(\#V)$. The difference between the sum of the subutilizations and $3N$ is at most the sum of the rounding errors when computing the $\hat{n}_v$. Hence it is bounded by $\#V$ and the loop at line \ref{lin:loopsub} is iterated at most $\#V$ times. Finding the minimizing $v$ at line \ref{lin:findmin} takes $O(\#V)$ operations (naively, we could also use a heap).
+
+Algorithm \ref{alg:opt} can be implemented with complexity $O(N^3\times \#Z)$. The flow graph has $O(N+\#Z)$ vertices and $O(N\times \#Z)$ edges. Dinic's algorithm has complexity $O(\#\mathrm{Vertices}^2\#\mathrm{Edges})$ hence in our case it is $O(N^3\times \#Z)$.
+ 
+Algorithm \ref{alg:mini} can be implented with complexity $O(N^3\# Z)$ under \eqref{hyp:A} and $O(N^3 \#Z \#V)$ under \eqref{hyp:B}.
+The graph $G_T$ has $O(N)$ vertices and $O(N\times \#Z)$ edges under assumption \eqref{hyp:A} and respectively $O(N\times \#Z)$ vertices and $O(N\times \#V)$ edges under assumption \eqref{hyp:B}. The loop at line \ref{lin:repeat} is iterated at most $N$ times since the distance between $T$ and $T'$ decreases at every iteration. Bellman-Ford algorithm has complexity $O(\#\mathrm{Vertices}\#\mathrm{Edges})$, which in our case amounts to $O(N^2\# Z)$ under \eqref{hyp:A} and $O(N^2 \#Z \#V)$ under \eqref{hyp:B}.
+ 
+\begin{algorithm}
+	\caption{Computation of the optimal utilization}
+	\label{alg:util}
+	\begin{algorithmic}[1]
+\Function{Compute optimal utilization}{$N$, $(c_v)_{v\in V}$}
+	\State $(\hat{n}_v)_{v\in V} \leftarrow $ \Call{Compute subutilization}{$N$, $(c_v)_{v\in V}$} \label{lin:subutil}
+	\While{$\sum_{v\in V} \hat{n}_v < 3N$} \label{lin:loopsub}
+	\State Pick $v\in V$ minimizing $\frac{c_v}{\hat{n}_v+1}$ and such that
+		$\sum_{v'\in z_v} \hat{n}_{v'} < N$ \label{lin:findmin}
+		\State $\hat{n}_v \leftarrow \hat{n}_v+1$
+	\EndWhile
+	\State \Return $(\hat{n}_v)_{v\in V}$
+\EndFunction
+\State
+
+\Function{Compute subutilization}{$N$, $(c_v)_{v\in V}$}
+		\State $R \leftarrow 3$
+\For{$v\in V$}
+\State $\hat{n}_v \leftarrow \mathrm{unset}$
+\EndFor
+\For{$z\in Z$}
+\State $c_z \leftarrow \sum_{v\in z} c_v$
+\EndFor
+\State $C \leftarrow \sum_{z\in Z} c_z$
+\While{$\exists z \in Z$ such that $R\times c_{z} > C$}
+\For{$v\in z$}
+\State $\hat{n}_v \leftarrow \left\lfloor \frac{c_v}{c_z} N \right\rfloor$
+\EndFor
+\State $C \leftarrow C-c_z$
+\State $R\leftarrow R-1$
+\EndWhile
+\For{$v\in V$}
+\If{$\hat{n}_v = \mathrm{unset}$}
+\State $\hat{n}_v \leftarrow \left\lfloor \frac{Rc_v}{C} N \right\rfloor$
+\EndIf
+\EndFor
+\State \Return $(\hat{n}_v)_{v\in V}$
+\EndFunction
+	\end{algorithmic}
+\end{algorithm}
+
+\begin{algorithm}
+	\caption{Computation of a candidate assignment}
+	\label{alg:opt}
+	\begin{algorithmic}[1]
+		\Function{Compute candidate assignment}{$N$, $(n_v)_{v\in V}$}
+		\State Compute the flow graph $G$
+		\State Compute the maximal flow $f$ using Dinic's algorithm with randomized neighbours enumeration
+		\State Construct the assignment $(T_i)_{1\le i\le N}$ from $f$
+		\State \Return $(T_i)_{1\le i\le N}$
+		\EndFunction
+	\end{algorithmic}
+\end{algorithm}
+
+
+\begin{algorithm}
+	\caption{Minimization of the number of transfers}
+	\label{alg:mini}
+	\begin{algorithmic}[1]
+		\Function{Minimization of transfers}{$(T_i)_{1\le i\le N}$, $(T'_i)_{1\le i\le N}$}
+		\State Construct the graph encoding $G_T$
+		\Repeat \label{lin:repeat}
+		\State Find a negative cycle $\gamma$ using Bellman-Ford algorithm on $G_T$
+		\State Reverse the orientations and weights of edges in $\gamma$
+		\Until{no negative cycle is found}
+		\State Update $(T_i)_{1\le i\le N}$ from $G_T$
+		\State \Return $(T_i)_{1\le i\le N}$
+		\EndFunction
+	\end{algorithmic}
+\end{algorithm}
+
+
+
+\section{TODO}
+
+- reunion deux fleurs : autres modes, autres contraintes
+
+\end{document}
+