prod: email: add scrutin.app & lalis.se to dkim signingtable

This reverts commit 1c224fcece.

.gitignore

@@ -4,3 +4,4 @@ secrets/*
 cluster/*/secrets/*
 !cluster/*/secrets/*.sample
 
+adrn-notes/

cluster/prod/app/backup/README.md

@@ -0,0 +1,32 @@
+## Pour remonter locement un backup de PSQL fait par Nomad (backup-weekly.hcl)
+
+```bash
+export AWS_BUCKET=backups-pgbasebackup
+export AWS_ENDPOINT=s3.deuxfleurs.shirokumo.net
+export AWS_ACCESS_KEY_ID=$(consul kv get "secrets/postgres/backup/aws_access_key_id")
+export AWS_SECRET_ACCESS_KEY=$(consul kv get secrets/postgres/backup/aws_secret_access_key)
+export CRYPT_PUBLIC_KEY=$(consul kv get secrets/postgres/backup/crypt_public_key)
+```
+
+Et voilà le travail : 
+
+```bash
+$ aws s3 --endpoint https://$AWS_ENDPOINT ls
+2022-04-14 17:00:50 backups-pgbasebackup
+
+$ aws s3 --endpoint https://$AWS_ENDPOINT ls s3://backups-pgbasebackup
+                           PRE 2024-07-28 00:00:36.140539/
+                           PRE 2024-08-04 00:00:21.291551/
+                           PRE 2024-08-11 00:00:26.589762/
+                           PRE 2024-08-18 00:00:40.873939/
+                           PRE 2024-08-25 01:03:54.672763/
+                           PRE 2024-09-01 00:00:20.019605/
+                           PRE 2024-09-08 00:00:16.969740/
+                           PRE 2024-09-15 00:00:37.951459/
+                           PRE 2024-09-22 00:00:21.030452/
+
+$ aws s3 --endpoint https://$AWS_ENDPOINT ls "s3://backups-pgbasebackup/2024-09-22 00:00:21.030452/"
+2024-09-22 03:23:28     623490 backup_manifest
+2024-09-22 03:25:32 6037121487 base.tar.gz
+2024-09-22 03:25:33   19948939 pg_wal.tar.gz
+```

cluster/prod/app/backup/build/backup-psql/backup-psql.py

@@ -44,6 +44,8 @@ if not client.bucket_exists(bucket):
   abort(f"Bucket {bucket} does not exist or its access is forbidden, aborting")
 
 # Perform the backup locally
+# Via command-line:
+# pg_basebackup --host=localhost --username=$PSQL_USER --pgdata=. --format=tar  --wal-method=stream --gzip --compress=6 --progress --max-rate=5M
 try:
   ret = subprocess.run(["pg_basebackup",
     f"--host={psql_host}",

cluster/prod/app/backup/deploy/backup-daily.hcl

@@ -21,7 +21,7 @@ job "backup_daily" {
       driver = "docker"
 
       config {
-        image = "restic/restic:0.16.0"
+        image = "restic/restic:0.16.4"
         entrypoint = [ "/bin/sh", "-c" ]
         args = [ "restic backup /mail && restic forget --group-by paths --keep-within 1m1d --keep-within-weekly 3m --keep-within-monthly 1y && restic prune --max-unused 50% --max-repack-size 2G && restic check" ]
         volumes = [
@@ -116,7 +116,7 @@ EOH
       driver = "docker"
 
       config {
-        image = "restic/restic:0.16.0"
+        image = "restic/restic:0.16.4"
         entrypoint = [ "/bin/sh", "-c" ]
         args = [ "restic backup $NOMAD_ALLOC_DIR/consul.json && restic forget --group-by paths --keep-within 1m1d --keep-within-weekly 3m --keep-within-monthly 1y && restic prune --max-unused 50% --max-repack-size 2G && restic check" ]
       }
@@ -152,14 +152,14 @@ EOH
     constraint {
       attribute = "${attr.unique.hostname}"
       operator = "="
-      value = "concombre"
+      value = "abricot"
     }
 
     task "main" {
       driver = "docker"
 
       config {
-        image = "restic/restic:0.16.0"
+        image = "restic/restic:0.16.4"
         entrypoint = [ "/bin/sh", "-c" ]
         args = [ "restic backup /cryptpad && restic forget --group-by paths --keep-within 1m1d --keep-within-weekly 3m --keep-within-monthly 1y && restic prune --max-unused 50% --max-repack-size 2G && restic check" ]
         volumes = [

cluster/prod/app/bagage/deploy/bagage.hcl

@@ -1,5 +1,5 @@
 job "bagage" {
-  datacenters = ["scorpio", "neptune"]
+  datacenters = ["corrin", "neptune", "scorpio"]
   type = "service"
   priority = 90
 

cluster/prod/app/cms/deploy/cms.hcl

@@ -1,5 +1,5 @@
 job "cms" {
-  datacenters = ["neptune", "scorpio"]
+  datacenters = ["corrin", "neptune", "scorpio"]
   type = "service"
 
   priority = 100

cluster/prod/app/core/deploy/bottin.hcl

@@ -1,5 +1,5 @@
 job "core-bottin" {
-  datacenters = ["neptune", "scorpio"]
+  datacenters = ["corrin", "neptune", "scorpio", "bespin"]
   type = "system"
   priority = 90
 

cluster/prod/app/core/deploy/d53.hcl

@@ -1,5 +1,5 @@
 job "core-d53" {
-  datacenters = ["neptune", "scorpio", "bespin"]
+  datacenters = ["neptune", "scorpio", "bespin", "corrin"]
   type = "service"
   priority = 90
 

cluster/prod/app/core/deploy/diplonat.hcl

@@ -1,5 +1,5 @@
 job "core-diplonat" {
-  datacenters = ["neptune", "scorpio", "bespin"]
+  datacenters = ["neptune", "scorpio", "bespin", "corrin"]
   type = "system"
   priority = 90
 

cluster/prod/app/core/deploy/tricot.hcl

@@ -3,7 +3,7 @@ job "core-tricot" {
   # on pourra mettre bespin quand on aura migré gitea de la vm vers le cluster
   # en attendant, les deux  ne sont pas capables de partager les certificats SSL
   # donc on laisse la VM gitea gérer les certifs et prendre tout le trafic http(s)
-  datacenters = ["neptune", "scorpio"]
+  datacenters = ["corrin", "neptune", "scorpio"]
   type = "system"
   priority = 90
 
@@ -28,13 +28,16 @@ job "core-tricot" {
       driver = "docker"
 
       config {
-        image = "superboum/amd64_tricot:54"
+        image = "armael/tricot:40g7jpp915jkfszlczfh1yw2x6syjkxs-redir-headers"
         network_mode = "host"
         readonly_rootfs = true
         ports = [ "http_port", "https_port" ]
         volumes = [
           "secrets:/etc/tricot",
         ]
+        ulimit {
+          nofile = "65535:65535"
+        }
       }
 
       resources {

cluster/prod/app/core/secrets.toml

@@ -3,3 +3,7 @@ type = 'user'
 description = 'LDAP base DN for everything'
 example = 'dc=example,dc=com'
 
+[secrets."d53/gandi_api_key"]
+type = 'user'
+description = 'Gandi API key'
+

cluster/prod/app/coturn/deploy/coturn.hcl

@@ -1,5 +1,5 @@
 job "coturn" {
-  datacenters = ["neptune", "scorpio"]
+  datacenters = ["corrin", "neptune", "scorpio"]
   type = "service"
 
   priority = 100
@@ -34,15 +34,13 @@ job "coturn" {
         ports = [ "prometheus", "turn_ctrl", "turn_data0", "turn_data1", "turn_data2",
                   "turn_data3", "turn_data4", "turn_data5", "turn_data6", "turn_data7",
                   "turn_data8", "turn_data9" ]
+        entrypoint = ["/local/docker-entrypoint.sh"]
         network_mode = "host"
-        volumes = [
-          "secrets/docker-entrypoint.sh:/usr/local/bin/docker-entrypoint.sh",
-        ]
       }
 
       template {
         data = file("../config/docker-entrypoint.sh")
-        destination = "secrets/docker-entrypoint.sh"
+        destination = "local/docker-entrypoint.sh"
         perms = 555
       }
 

cluster/prod/app/cryptpad/build/README.md

@@ -1,29 +1,52 @@
-## Build
+# CryptPad for NixOS with Deuxfleurs flavour
 
-Cryptpad being not NixOS native, an upgrade must be done in 4 steps:
+## Building
-  1. Bump the cryptpad version in `common.nix`
-  2. Rebuild the Nix lock files for the dependencies 
-  3. Build the package for Nix
-  4. Create a container from the Nix package
 
-To bump the nix version, set the desired tag in `common.nix` in the `cryptpadVersion` entry.
+The `default.nix` file follows the nixpkgs `callPackage` convention for fetching dependencies, so you need to either:
-Set the corresponding commit in the `cryptadCommit` field, its goal would be to detect unwanted update of the tag.
 
-To rebuild the lock files (they are stored in the `nix.lock` folder):
+- Run `nix-build --expr '{ ... }@args: (import <nixpkgs> {}).callPackage ./default.nix args'`
+- Do the `callPackage from a higher-level directory importing your package`
 
-```
+### Docker
-nix-shell --run "update_lock"
+
+The `docker.nix` derives into a Docker image you can load simply by running:
+
+```shell
+docker load -i $(nix-build docker.nix)
 ```
 
-To build cryptpad:
+You can then test the built Docker image using the provided `docker-compose.yml` and `config.js` files, which are
+configured to render the instance accessible at `http://localhost:3000` with data stored into the `_data` folder.
 
-```
+
-nix-build
+### Deuxfleurs flavour
+The `deuxfleurs.nix` file derives into two derivations: The CryptPad derivation itself and a Docker image,
+which can be choose by passing the `-A [name]` flags to `nix-build`
+
+For example, to build and load the Deuxfleurs-flavoured CryptPad Docker image, you run:
+
+```shell
+docker load -i $(nix-build deuxfleurs.nix -A docker)
 ```
 
-Create the container:
+## OnlyOffice integration
+Apart for `deuxfleurs.nix`, both `default.nix` and `docker.nix` files build CryptPad with a copy of OnlyOffice pre-built and
+used by CryptPad, which can result to large Docker image (~2.6GiB)
 
+This behaviour is configurable by passing the `--arg withOnlyOffice false` flag to `nix-build` when building them.
+
+## Updating the Deuxfleurs pinned nixpkgs
+The pinned sources files are generated with the [npins](https://github.com/andir/npins) tool.
+
+To update the pinned nixpkgs, you simply run the following command:
+
+```shell
+npins update
 ```
-docker load < $(nix-build docker.nix)
+
-docker push superboum/cryptpad:???
+To modify the pinned nixpkgs, remove it and re-add it using the new target, for exemple for `nixos-unstable`:
+
+```shell
+npins remove nixpkgs
+npins add --name nixpkgs channel nixos-unstable
 ```

cluster/prod/app/cryptpad/build/common.nix

@@ -1,22 +0,0 @@
-rec {
-  cryptpadVersion = "4.14.1+2";
-  cryptpadCommit = "18c371bb5bda068a5d962dd7c4f0726320eea5e9";
-
-  pkgsSrc = fetchTarball {
-    # Latest commit on https://github.com/NixOS/nixpkgs/tree/nixos-21.11
-    # As of 2022-04-15
-    url ="https://github.com/NixOS/nixpkgs/archive/2f06b87f64bc06229e05045853e0876666e1b023.tar.gz";
-    sha256 = "sha256:1d7zg96xw4qsqh7c89pgha9wkq3rbi9as3k3d88jlxy2z0ns0cy2";
-  };
-  cryptpadSrc = builtins.fetchGit {
-    url = "https://github.com/superboum/cryptpad";
-    ref = "refs/tags/${cryptpadVersion}";
-    rev = cryptpadCommit;
-  };
-  bower2nixSrc = builtins.fetchGit {
-    url = "https://github.com/superboum/bower2nix";
-    ref = "new";
-    rev = "618ab3e206325c63fe4526ae842a1f6c792b0e27";
-  };
-  nodejs = "nodejs-slim-16_x";
-}

cluster/prod/app/cryptpad/build/default.nix

@@ -1,77 +1,132 @@
-let
+{ lib
-  common = import ./common.nix;
+, stdenvNoCC
-  pkgs = import common.pkgsSrc {};
-  nodejs = pkgs.${common.nodejs};
 
-  bower = (pkgs.buildBowerComponents {
+, buildNpmPackage
-    name = "cryptpad-${common.cryptpadVersion}-bower";
+, fetchFromGitHub
-    generated = ./nix.lock/bower.nix;
+, fetchzip
-    src = common.cryptpadSrc;
-  }).overrideAttrs (old: {
-    bowerPackages = old.bowerPackages.override (old_: {
-      # add missing dependencies:
-      # Those dependencies are EOL and they are not installed by buildBowerComponents,
-      # but they are required, otherwise the resolver crashes.
-      # * add the second jquery ~2.1.0 entry
-      # * add the second bootstrap ~3.1.1 entry
-      paths = old_.paths ++ [
-        (pkgs.fetchbower "jquery" "2.1.0" "~2.1.0" "02kwvz93vzpv10qnp7s0dz3al0jh77awwrizb6wadsvgifxssnlr")
-        (pkgs.fetchbower "bootstrap" "3.1.1" "~3.1.1" "06bhjwa8p7mzbpr3jkgydd804z1nwrkdql66h7jkfml99psv9811")
-      ];
-    });
-  });
 
-  npm = import ./nix.lock/npm.nix {
+, nodejs
-    inherit pkgs;
+
+, withOnlyOffice ? true
+}: let
+  onlyOfficeVersions = {
+    v1 = {
+      rev = "4f370bebe96e3a0d4054df87412ee5b2c6ed8aaa";
+      hash = "sha256-TE/99qOx4wT2s0op9wi+SHwqTPYq/H+a9Uus9Zj4iSY=";
+    };
+    v2b = {
+      rev = "d9da72fda95daf93b90ffa345757c47eb5b919dd";
+      hash = "sha256-SiRDRc2vnLwCVnvtk+C8PKw7IeuSzHBaJmZHogRe3hQ=";
+    };
+    v4 = {
+      rev =  "6ebc6938b6841440ffad2efc1e23f1dc1ceda964";
+      hash = "sha256-eto1+8Tk/s3kbUCpbUh8qCS8EOq700FYG1/KiHyynaA=";
+    };
+    v5 = {
+      rev = "88a356f08ded2f0f4620bda66951caf1d7f02c21";
+      hash = "sha256-8j1rlAyHlKx6oAs2pIhjPKcGhJFj6ZzahOcgenyeOCc=";
+    };
+    v6 = {
+      rev = "abd8a309f6dd37289f950cd8cea40df4492d8a15";
+      hash = "sha256-BZdExj2q/bqUD3k9uluOot2dlrWKA+vpad49EdgXKww=";
+    };
+    v7 = {
+      rev = "e1267803ea749cd93e9d5f81438011ea620d04af";
+      hash = "sha256-iIds0GnCHAyeIEdSD4aCCgDtnnwARh3NE470CywseS0=";
+    };
+  };
+  mkOnlyOffice = {
+    pname, version
+  }: stdenvNoCC.mkDerivation (final: {
+    pname = "${pname}-onlyoffice";
+    inherit version;
+
+    x2t = let
+      version = "v7.3+1";
+    in fetchzip {
+      url = "https://github.com/cryptpad/onlyoffice-x2t-wasm/releases/download/${version}/x2t.zip";
+      hash = "sha256-d5raecsTOflo0UpjSEZW5lker4+wdkTb6IyHNq5iBg8=";
+      stripRoot = false;
     };
 
-in
+    srcs = lib.mapAttrsToList (version: { rev, hash ? lib.fakeHash }: fetchFromGitHub {
-  pkgs.stdenv.mkDerivation {
+      name = "${final.pname}-${version}-source";
-    name = "cryptpad-${common.cryptpadVersion}";
+      owner = "cryptpad";
-    src = common.cryptpadSrc;
+      repo = "onlyoffice-builds";
+      inherit rev hash;
+    }) onlyOfficeVersions;
 
-    buildPhase = ''
+    dontBuild = true;
-      cp -r ${npm.nodeDependencies}/lib/node_modules node_modules
-      chmod +w -R node_modules
 
-      # clear executable files inside the node_modules folder to reduce dependencies
+    sourceRoot = ".";
-      # and attack surface
-      find node_modules -type f ! -path 'node_modules/gar/*' -executable -print | tee >(xargs -n 20 rm)
 
-      # Remove only office that IS BIG
+    installPhase = ''
-      # COMMENTED as it is not as easy as planned.
+      mkdir -p $out
-      # rm -rf www/common/onlyoffice
+      ${lib.concatLines (map
+        (version: "cp -Tr ${final.pname}-${version}-source $out/${version}")
+        (builtins.attrNames onlyOfficeVersions)
+      )}
+      cp -Tr $x2t $out/x2t
+    '';
+  });
+in buildNpmPackage rec {
+  pname = "cryptpad";
+  version = "2024.9.0";
+
+  src = fetchFromGitHub {
+    owner = "cryptpad";
+    repo = "cryptpad";
+    rev = version;
+    hash = "sha256-OUtWaDVLRUbKS0apwY0aNq4MalGFv+fH9VA7LvWWYRs=";
+  };
+
+  npmDepsHash = "sha256-pK0b7q1kJja9l8ANwudbfo3jpldwuO56kuulS8X9A5s=";
+
+  inherit nodejs;
+
+  onlyOffice = lib.optional withOnlyOffice (mkOnlyOffice {
+    inherit pname version;
+  });
+
+  makeCacheWritable = true;
+  dontFixup = true;
+
+  preBuild = ''
+    npm run install:components
+  '' + lib.optionalString withOnlyOffice ''
+    ln -s $onlyOffice www/common/onlyoffice/dist
+  '';
+
+  postBuild = ''
+    rm -rf customize
   '';
 
   installPhase = ''
-      mkdir -p $out/{bin,opt}
+    runHook preInstall
 
-      out_cryptpad=$out/opt/
+    mkdir -p $out
+    cp -R . $out/
 
-      # copy the source code
+    substituteInPlace $out/lib/workers/index.js \
-      cp -r .bowerrc bower.json package.json package-lock.json customize.dist lib server.js www $out_cryptpad
+      --replace-warn "lib/workers/db-worker" "$out/lib/workers/db-worker"
 
-      # mount node_modules
+    makeWrapper ${lib.getExe nodejs} $out/bin/cryptpad-server \
-      cp -r node_modules $out_cryptpad/node_modules
+      --chdir $out \
+      --add-flags server.js
 
-      # patch
+    runHook postInstall
-      substituteInPlace $out_cryptpad/lib/workers/index.js --replace "lib/workers/db-worker" "$out_cryptpad/lib/workers/db-worker"
-
-      # mount bower, based on the .bowerrc file at the git repo root
-      cp -r ${bower}/bower_components $out_cryptpad/www/
-
-      # cryptpad is bugged with absolute path, this is a workaround to use absolute path as relative path
-      ln -s / $out_cryptpad/root
-
-      # start script, cryptpad is lost if its working directory is not its source directory
-      cat > $out/bin/cryptpad <<EOF
-      #!${pkgs.stdenv.shell}
-      cd $out_cryptpad
-      exec ${nodejs}/bin/node server.js
-      EOF
-
-      chmod +x $out/bin/cryptpad
   '';
 
-    dontFixup = true;
+  passthru = {
+    inherit onlyOffice;
+  };
+
+  meta = {
+    description = "Collaborative office suite, end-to-end encrypted and open-source.";
+    homepage = "https://cryptpad.org";
+    changelog = "https://github.com/cryptpad/cryptpad/releases/tag/${version}";
+    license = lib.licenses.agpl3Plus;
+    platforms = lib.platforms.all;
+    mainProgram = "cryptpad-server";
+  };
 }

cluster/prod/app/cryptpad/build/deuxfleurs.nix

@@ -0,0 +1,14 @@
+{ name ? "deuxfleurs/cryptpad"
+, tag ? "nix-latest"
+}: let
+  sources = import ./npins;
+  pkgs = import sources.nixpkgs {};
+in rec {
+  cryptpad = pkgs.callPackage ./default.nix {};
+  docker = import ./docker.nix {
+    inherit pkgs;
+    inherit name tag;
+    inherit cryptpad;
+    withOnlyOffice = true;
+  };
+}

cluster/prod/app/cryptpad/build/docker.nix

@@ -1,11 +1,27 @@
-let
+{ pkgs ? import <nixpkgs> {}
-  common = import ./common.nix;
+
-  pkgs = import common.pkgsSrc {};
+, name ? "cryptpad"
-  app = import ./default.nix;
+, tag ? "nix-latest"
-in
+
-  pkgs.dockerTools.buildLayeredImage {
+, withOnlyOffice ? true
-    name = "superboum/cryptpad";
+
+, cryptpad ? pkgs.callPackage ./default.nix { inherit withOnlyOffice; }
+}: let
+  cryptpad' = cryptpad.overrideAttrs {
+    postInstall = ''
+      ln -sf /cryptpad/customize $out/customize
+    '';
+  };
+in pkgs.dockerTools.buildImage {
+  inherit name tag;
+
   config = {
-      Cmd = [ "${app}/bin/cryptpad" ];
+    Cmd = [
+      (pkgs.lib.getExe cryptpad')
+    ];
+
+    Volumes = {
+      "/cryptpad/customize" = {};
+    };
   };
 }

cluster/prod/app/cryptpad/build/nix.lock/bower.json

@@ -1,57 +0,0 @@
-{
-  "name": "cryptpad",
-  "version": "0.1.0",
-  "authors": [
-    "Caleb James DeLisle <cjd@cjdns.fr>"
-  ],
-  "description": "realtime collaborative visual editor with zero knowlege server",
-  "main": "www/index.html",
-  "moduleType": [
-    "node"
-  ],
-  "license": "AGPLv3",
-  "ignore": [
-    "**/.*",
-    "node_modules",
-    "bower_components",
-    "test",
-    "tests"
-  ],
-  "dependencies": {
-    "jquery": "3.6.0",
-    "tweetnacl": "0.12.2",
-    "components-font-awesome": "^4.6.3",
-    "ckeditor": "4.14.0",
-    "codemirror": "^5.19.0",
-    "requirejs": "2.3.5",
-    "marked": "1.1.0",
-    "rangy": "rangy-release#~1.3.0",
-    "json.sortify": "~2.1.0",
-    "hyperjson": "~1.4.0",
-    "chainpad-crypto": "^0.2.0",
-    "chainpad-listmap": "^1.0.0",
-    "chainpad": "^5.2.0",
-    "file-saver": "1.3.1",
-    "alertifyjs": "1.0.11",
-    "scrypt-async": "1.2.0",
-    "require-css": "0.1.10",
-    "bootstrap": "^v4.0.0",
-    "diff-dom": "2.1.1",
-    "nthen": "0.1.7",
-    "open-sans-fontface": "^1.4.2",
-    "bootstrap-tokenfield": "0.12.1",
-    "localforage": "^1.5.2",
-    "html2canvas": "^0.4.1",
-    "croppie": "^2.5.0",
-    "sortablejs": "^1.6.0",
-    "saferphore": "^0.0.1",
-    "jszip": "3.7.1",
-    "requirejs-plugins": "^1.0.3",
-    "dragula.js": "3.7.2",
-    "MathJax": "3.0.5"
-  },
-  "resolutions": {
-    "bootstrap": "^v4.0.0",
-    "jquery": "3.6.0"
-  }
-}

cluster/prod/app/cryptpad/build/nix.lock/bower.nix

@@ -1,37 +0,0 @@
-# Generated by bower2nix v3.3.0 (https://github.com/rvl/bower2nix)
-{ fetchbower, buildEnv }:
-buildEnv { name = "bower-env"; ignoreCollisions = true; paths = [
-  (fetchbower "jquery" "3.6.0" "3.6.0" "1wx5n605x6ga483hba43gxjncgzk8yvxc3h0jlwgpjd0h54y9v6l")
-  (fetchbower "tweetnacl" "0.12.2" "0.12.2" "1lfzbfrdaly3zyzbcp1p53yhxlrx56k8x04q924kg7l52gblm65g")
-  (fetchbower "components-font-awesome" "4.7.0" "^4.6.3" "1w27im6ayjrbgjqa0i49ml5d3wy4ld40h9b29hz9myv77bpx4lg1")
-  (fetchbower "ckeditor" "4.14.0" "4.14.0" "0lw9q0k8c0jlxvf35vrccab9c3c8rgpc6x66czj9si8yy2lyliyp")
-  (fetchbower "codemirror" "5.65.3" "^5.19.0" "0z6pd0q0cy0k0dkplx4f3cmmjqbiixv6wqlzbz5j8dnsxr5hhgzh")
-  (fetchbower "requirejs" "2.3.5" "2.3.5" "05lyvgz914h2w08r24rk0vkk3yxmqrvlg7j3i5av9ffkg9lpzsli")
-  (fetchbower "marked" "1.1.0" "1.1.0" "1sdgqw9iki9c1pfm4c5h6c956mchbip2jywjrcmrlb75k53flsjz")
-  (fetchbower "rangy" "rangy-release#1.3.0" "rangy-release#~1.3.0" "13x3wci003p8jyv2ncir0k23bxckx99b3555r0zvgmlwycg7w0zv")
-  (fetchbower "json.sortify" "2.1.0" "~2.1.0" "1rz9xz0gnm4ak31n10vhslqsw8fw493gjylwj8xsy3bxqq1ygpnh")
-  (fetchbower "hyperjson" "1.4.0" "~1.4.0" "1n68ls3x4lyhg1yy8i4q3xkgh5xqpyakf45sny4x91mkr68x4bd9")
-  (fetchbower "chainpad-crypto" "0.2.7" "^0.2.0" "16j0gjj1v8dckqpsg38229qs4dammz7vx8ywsik6f0brzf4py65a")
-  (fetchbower "chainpad-listmap" "1.0.1" "^1.0.0" "0s2v27hhraifb1yjw5fka4a922zmgsdngsaq1nfd48gbs8gd2rrd")
-  (fetchbower "chainpad" "5.2.4" "^5.2.0" "1f4nap0r8w50qpmjdfhhjhpz5xcl0n4zaxxnav1qaxi5j6dyg8h6")
-  (fetchbower "file-saver" "1.3.1" "1.3.1" "065nzkvdiicxnw06z1sjz1sbp9nyis8z839hv6ng1fk25dc5kvkg")
-  (fetchbower "alertifyjs" "1.0.11" "1.0.11" "0v7323bzq90k35shm3h6azj4wd9la3kbi1va1pw4qyvndkwma69l")
-  (fetchbower "scrypt-async" "1.2.0" "1.2.0" "0d076ax708p9b8hcmk4f82j925nlnm0hmp0ni45ql37g7iirfpyv")
-  (fetchbower "require-css" "0.1.10" "0.1.10" "106gz9i76v71q9zx2pnqkkj342m630lvssnw54023a0ljc0gqcwq")
-  (fetchbower "bootstrap" "4.6.1" "^v4.0.0" "0g8zy1fl396lawgjvfhlpcl38zxsgybhnzi8b6b4m9nccvmpxv83")
-  (fetchbower "diff-dom" "2.1.1" "2.1.1" "0bp8c80g11hhlkvl3lhrqc39jvqiiyqvrgk1nsn35ps01ava07z9")
-  (fetchbower "nthen" "0.1.7" "0.1.7" "03yap5ildigaw4rwxmxs37pcwhq415iham8w39zd56ka98gpfxa5")
-  (fetchbower "open-sans-fontface" "1.4.2" "^1.4.2" "0ksav1fcq640fmdz49ra4prwsrrfj35y2p4shx1jh1j7zxd044nf")
-  (fetchbower "bootstrap-tokenfield" "0.12.1" "0.12.1" "1dh791s6ih8bf9ihck9n39h68c273jb3lg4mqk94bvqraz45fvwx")
-  (fetchbower "localforage" "1.10.0" "^1.5.2" "019rh006v2w5x63mgk78qhw59kf8czbkwdvfngmac8fs6gz88lc8")
-  (fetchbower "html2canvas" "0.4.1" "^0.4.1" "0yg7y90nav068q0i5afc2c221zkddpf28hi0hwc46cawx4180c69")
-  (fetchbower "croppie" "2.6.5" "^2.5.0" "1j1v5620zi13ad42r358i4ay891abwn6nz357484kgq2bgjj6ccx")
-  (fetchbower "sortablejs" "1.15.0" "^1.6.0" "1wk1097jrxbp2c4ghcppqd3h2gnq5b01qkf9426mc08zgszlvjr7")
-  (fetchbower "saferphore" "0.0.1" "^0.0.1" "1wfr9wpbm3lswmvy2p0247ydb108h4qh5s286py89k871qh6jwdi")
-  (fetchbower "jszip" "3.7.1" "3.7.1" "0f14bak7vylxizi6pvj3znjc2cx922avbv7lslklvic85x0318lf")
-  (fetchbower "requirejs-plugins" "1.0.3" "^1.0.3" "00s3sdz1ykygx5shldwhhhybwgw7c99vkqd94i5i5x0gl97ifxf5")
-  (fetchbower "dragula.js" "3.7.2" "3.7.2" "0dbkmrl8bcxiplprmmp9fj96ri5nahb2ql8cc7zwawncv0drvlh0")
-  (fetchbower "MathJax" "3.0.5" "3.0.5" "087a9av15qj43m8pr3b9g59ncmydhmg40m6dfzsac62ykianh2a0")
-  (fetchbower "chainpad-netflux" "1.0.0" "^1.0.0" "08rpc73x1vyvd6zkb7w0m1smzjhq3b7cwb30nlmg93x873zjlsl6")
-  (fetchbower "netflux-websocket" "1.0.0" "^1.0.0" "10hgc5ra3ll7qc2r8aal6p03gx6dgz06l2b54lh995pvf901wzi6")
-]; }

cluster/prod/app/cryptpad/build/nix.lock/node-env.nix

@@ -1,588 +0,0 @@
-# This file originates from node2nix
-
-{lib, stdenv, nodejs, python2, pkgs, libtool, runCommand, writeTextFile, writeShellScript}:
-
-let
-  # Workaround to cope with utillinux in Nixpkgs 20.09 and util-linux in Nixpkgs master
-  utillinux = if pkgs ? utillinux then pkgs.utillinux else pkgs.util-linux;
-
-  python = if nodejs ? python then nodejs.python else python2;
-
-  # Create a tar wrapper that filters all the 'Ignoring unknown extended header keyword' noise
-  tarWrapper = runCommand "tarWrapper" {} ''
-    mkdir -p $out/bin
-
-    cat > $out/bin/tar <<EOF
-    #! ${stdenv.shell} -e
-    $(type -p tar) "\$@" --warning=no-unknown-keyword --delay-directory-restore
-    EOF
-
-    chmod +x $out/bin/tar
-  '';
-
-  # Function that generates a TGZ file from a NPM project
-  buildNodeSourceDist =
-    { name, version, src, ... }:
-
-    stdenv.mkDerivation {
-      name = "node-tarball-${name}-${version}";
-      inherit src;
-      buildInputs = [ nodejs ];
-      buildPhase = ''
-        export HOME=$TMPDIR
-        tgzFile=$(npm pack | tail -n 1) # Hooks to the pack command will add output (https://docs.npmjs.com/misc/scripts)
-      '';
-      installPhase = ''
-        mkdir -p $out/tarballs
-        mv $tgzFile $out/tarballs
-        mkdir -p $out/nix-support
-        echo "file source-dist $out/tarballs/$tgzFile" >> $out/nix-support/hydra-build-products
-      '';
-    };
-
-  # Common shell logic
-  installPackage = writeShellScript "install-package" ''
-    installPackage() {
-      local packageName=$1 src=$2
-
-      local strippedName
-
-      local DIR=$PWD
-      cd $TMPDIR
-
-      unpackFile $src
-
-      # Make the base dir in which the target dependency resides first
-      mkdir -p "$(dirname "$DIR/$packageName")"
-
-      if [ -f "$src" ]
-      then
-          # Figure out what directory has been unpacked
-          packageDir="$(find . -maxdepth 1 -type d | tail -1)"
-
-          # Restore write permissions to make building work
-          find "$packageDir" -type d -exec chmod u+x {} \;
-          chmod -R u+w "$packageDir"
-
-          # Move the extracted tarball into the output folder
-          mv "$packageDir" "$DIR/$packageName"
-      elif [ -d "$src" ]
-      then
-          # Get a stripped name (without hash) of the source directory.
-          # On old nixpkgs it's already set internally.
-          if [ -z "$strippedName" ]
-          then
-              strippedName="$(stripHash $src)"
-          fi
-
-          # Restore write permissions to make building work
-          chmod -R u+w "$strippedName"
-
-          # Move the extracted directory into the output folder
-          mv "$strippedName" "$DIR/$packageName"
-      fi
-
-      # Change to the package directory to install dependencies
-      cd "$DIR/$packageName"
-    }
-  '';
-
-  # Bundle the dependencies of the package
-  #
-  # Only include dependencies if they don't exist. They may also be bundled in the package.
-  includeDependencies = {dependencies}:
-    lib.optionalString (dependencies != []) (
-      ''
-        mkdir -p node_modules
-        cd node_modules
-      ''
-      + (lib.concatMapStrings (dependency:
-        ''
-          if [ ! -e "${dependency.name}" ]; then
-              ${composePackage dependency}
-          fi
-        ''
-      ) dependencies)
-      + ''
-        cd ..
-      ''
-    );
-
-  # Recursively composes the dependencies of a package
-  composePackage = { name, packageName, src, dependencies ? [], ... }@args:
-    builtins.addErrorContext "while evaluating node package '${packageName}'" ''
-      installPackage "${packageName}" "${src}"
-      ${includeDependencies { inherit dependencies; }}
-      cd ..
-      ${lib.optionalString (builtins.substring 0 1 packageName == "@") "cd .."}
-    '';
-
-  pinpointDependencies = {dependencies, production}:
-    let
-      pinpointDependenciesFromPackageJSON = writeTextFile {
-        name = "pinpointDependencies.js";
-        text = ''
-          var fs = require('fs');
-          var path = require('path');
-
-          function resolveDependencyVersion(location, name) {
-              if(location == process.env['NIX_STORE']) {
-                  return null;
-              } else {
-                  var dependencyPackageJSON = path.join(location, "node_modules", name, "package.json");
-
-                  if(fs.existsSync(dependencyPackageJSON)) {
-                      var dependencyPackageObj = JSON.parse(fs.readFileSync(dependencyPackageJSON));
-
-                      if(dependencyPackageObj.name == name) {
-                          return dependencyPackageObj.version;
-                      }
-                  } else {
-                      return resolveDependencyVersion(path.resolve(location, ".."), name);
-                  }
-              }
-          }
-
-          function replaceDependencies(dependencies) {
-              if(typeof dependencies == "object" && dependencies !== null) {
-                  for(var dependency in dependencies) {
-                      var resolvedVersion = resolveDependencyVersion(process.cwd(), dependency);
-
-                      if(resolvedVersion === null) {
-                          process.stderr.write("WARNING: cannot pinpoint dependency: "+dependency+", context: "+process.cwd()+"\n");
-                      } else {
-                          dependencies[dependency] = resolvedVersion;
-                      }
-                  }
-              }
-          }
-
-          /* Read the package.json configuration */
-          var packageObj = JSON.parse(fs.readFileSync('./package.json'));
-
-          /* Pinpoint all dependencies */
-          replaceDependencies(packageObj.dependencies);
-          if(process.argv[2] == "development") {
-              replaceDependencies(packageObj.devDependencies);
-          }
-          replaceDependencies(packageObj.optionalDependencies);
-
-          /* Write the fixed package.json file */
-          fs.writeFileSync("package.json", JSON.stringify(packageObj, null, 2));
-        '';
-      };
-    in
-    ''
-      node ${pinpointDependenciesFromPackageJSON} ${if production then "production" else "development"}
-
-      ${lib.optionalString (dependencies != [])
-        ''
-          if [ -d node_modules ]
-          then
-              cd node_modules
-              ${lib.concatMapStrings (dependency: pinpointDependenciesOfPackage dependency) dependencies}
-              cd ..
-          fi
-        ''}
-    '';
-
-  # Recursively traverses all dependencies of a package and pinpoints all
-  # dependencies in the package.json file to the versions that are actually
-  # being used.
-
-  pinpointDependenciesOfPackage = { packageName, dependencies ? [], production ? true, ... }@args:
-    ''
-      if [ -d "${packageName}" ]
-      then
-          cd "${packageName}"
-          ${pinpointDependencies { inherit dependencies production; }}
-          cd ..
-          ${lib.optionalString (builtins.substring 0 1 packageName == "@") "cd .."}
-      fi
-    '';
-
-  # Extract the Node.js source code which is used to compile packages with
-  # native bindings
-  nodeSources = runCommand "node-sources" {} ''
-    tar --no-same-owner --no-same-permissions -xf ${nodejs.src}
-    mv node-* $out
-  '';
-
-  # Script that adds _integrity fields to all package.json files to prevent NPM from consulting the cache (that is empty)
-  addIntegrityFieldsScript = writeTextFile {
-    name = "addintegrityfields.js";
-    text = ''
-      var fs = require('fs');
-      var path = require('path');
-
-      function augmentDependencies(baseDir, dependencies) {
-          for(var dependencyName in dependencies) {
-              var dependency = dependencies[dependencyName];
-
-              // Open package.json and augment metadata fields
-              var packageJSONDir = path.join(baseDir, "node_modules", dependencyName);
-              var packageJSONPath = path.join(packageJSONDir, "package.json");
-
-              if(fs.existsSync(packageJSONPath)) { // Only augment packages that exist. Sometimes we may have production installs in which development dependencies can be ignored
-                  console.log("Adding metadata fields to: "+packageJSONPath);
-                  var packageObj = JSON.parse(fs.readFileSync(packageJSONPath));
-
-                  if(dependency.integrity) {
-                      packageObj["_integrity"] = dependency.integrity;
-                  } else {
-                      packageObj["_integrity"] = "sha1-000000000000000000000000000="; // When no _integrity string has been provided (e.g. by Git dependencies), add a dummy one. It does not seem to harm and it bypasses downloads.
-                  }
-
-                  if(dependency.resolved) {
-                      packageObj["_resolved"] = dependency.resolved; // Adopt the resolved property if one has been provided
-                  } else {
-                      packageObj["_resolved"] = dependency.version; // Set the resolved version to the version identifier. This prevents NPM from cloning Git repositories.
-                  }
-
-                  if(dependency.from !== undefined) { // Adopt from property if one has been provided
-                      packageObj["_from"] = dependency.from;
-                  }
-
-                  fs.writeFileSync(packageJSONPath, JSON.stringify(packageObj, null, 2));
-              }
-
-              // Augment transitive dependencies
-              if(dependency.dependencies !== undefined) {
-                  augmentDependencies(packageJSONDir, dependency.dependencies);
-              }
-          }
-      }
-
-      if(fs.existsSync("./package-lock.json")) {
-          var packageLock = JSON.parse(fs.readFileSync("./package-lock.json"));
-
-          if(![1, 2].includes(packageLock.lockfileVersion)) {
-             process.stderr.write("Sorry, I only understand lock file versions 1 and 2!\n");
-             process.exit(1);
-          }
-
-          if(packageLock.dependencies !== undefined) {
-              augmentDependencies(".", packageLock.dependencies);
-          }
-      }
-    '';
-  };
-
-  # Reconstructs a package-lock file from the node_modules/ folder structure and package.json files with dummy sha1 hashes
-  reconstructPackageLock = writeTextFile {
-    name = "addintegrityfields.js";
-    text = ''
-      var fs = require('fs');
-      var path = require('path');
-
-      var packageObj = JSON.parse(fs.readFileSync("package.json"));
-
-      var lockObj = {
-          name: packageObj.name,
-          version: packageObj.version,
-          lockfileVersion: 1,
-          requires: true,
-          dependencies: {}
-      };
-
-      function augmentPackageJSON(filePath, dependencies) {
-          var packageJSON = path.join(filePath, "package.json");
-          if(fs.existsSync(packageJSON)) {
-              var packageObj = JSON.parse(fs.readFileSync(packageJSON));
-              dependencies[packageObj.name] = {
-                  version: packageObj.version,
-                  integrity: "sha1-000000000000000000000000000=",
-                  dependencies: {}
-              };
-              processDependencies(path.join(filePath, "node_modules"), dependencies[packageObj.name].dependencies);
-          }
-      }
-
-      function processDependencies(dir, dependencies) {
-          if(fs.existsSync(dir)) {
-              var files = fs.readdirSync(dir);
-
-              files.forEach(function(entry) {
-                  var filePath = path.join(dir, entry);
-                  var stats = fs.statSync(filePath);
-
-                  if(stats.isDirectory()) {
-                      if(entry.substr(0, 1) == "@") {
-                          // When we encounter a namespace folder, augment all packages belonging to the scope
-                          var pkgFiles = fs.readdirSync(filePath);
-
-                          pkgFiles.forEach(function(entry) {
-                              if(stats.isDirectory()) {
-                                  var pkgFilePath = path.join(filePath, entry);
-                                  augmentPackageJSON(pkgFilePath, dependencies);
-                              }
-                          });
-                      } else {
-                          augmentPackageJSON(filePath, dependencies);
-                      }
-                  }
-              });
-          }
-      }
-
-      processDependencies("node_modules", lockObj.dependencies);
-
-      fs.writeFileSync("package-lock.json", JSON.stringify(lockObj, null, 2));
-    '';
-  };
-
-  prepareAndInvokeNPM = {packageName, bypassCache, reconstructLock, npmFlags, production}:
-    let
-      forceOfflineFlag = if bypassCache then "--offline" else "--registry http://www.example.com";
-    in
-    ''
-        # Pinpoint the versions of all dependencies to the ones that are actually being used
-        echo "pinpointing versions of dependencies..."
-        source $pinpointDependenciesScriptPath
-
-        # Patch the shebangs of the bundled modules to prevent them from
-        # calling executables outside the Nix store as much as possible
-        patchShebangs .
-
-        # Deploy the Node.js package by running npm install. Since the
-        # dependencies have been provided already by ourselves, it should not
-        # attempt to install them again, which is good, because we want to make
-        # it Nix's responsibility. If it needs to install any dependencies
-        # anyway (e.g. because the dependency parameters are
-        # incomplete/incorrect), it fails.
-        #
-        # The other responsibilities of NPM are kept -- version checks, build
-        # steps, postprocessing etc.
-
-        export HOME=$TMPDIR
-        cd "${packageName}"
-        runHook preRebuild
-
-        ${lib.optionalString bypassCache ''
-          ${lib.optionalString reconstructLock ''
-            if [ -f package-lock.json ]
-            then
-                echo "WARNING: Reconstruct lock option enabled, but a lock file already exists!"
-                echo "This will most likely result in version mismatches! We will remove the lock file and regenerate it!"
-                rm package-lock.json
-            else
-                echo "No package-lock.json file found, reconstructing..."
-            fi
-
-            node ${reconstructPackageLock}
-          ''}
-
-          node ${addIntegrityFieldsScript}
-        ''}
-
-        npm ${forceOfflineFlag} --nodedir=${nodeSources} ${npmFlags} ${lib.optionalString production "--production"} rebuild
-
-        if [ "''${dontNpmInstall-}" != "1" ]
-        then
-            # NPM tries to download packages even when they already exist if npm-shrinkwrap is used.
-            rm -f npm-shrinkwrap.json
-
-            npm ${forceOfflineFlag} --nodedir=${nodeSources} ${npmFlags} ${lib.optionalString production "--production"} install
-        fi
-    '';
-
-  # Builds and composes an NPM package including all its dependencies
-  buildNodePackage =
-    { name
-    , packageName
-    , version
-    , dependencies ? []
-    , buildInputs ? []
-    , production ? true
-    , npmFlags ? ""
-    , dontNpmInstall ? false
-    , bypassCache ? false
-    , reconstructLock ? false
-    , preRebuild ? ""
-    , dontStrip ? true
-    , unpackPhase ? "true"
-    , buildPhase ? "true"
-    , meta ? {}
-    , ... }@args:
-
-    let
-      extraArgs = removeAttrs args [ "name" "dependencies" "buildInputs" "dontStrip" "dontNpmInstall" "preRebuild" "unpackPhase" "buildPhase" "meta" ];
-    in
-    stdenv.mkDerivation ({
-      name = "${name}-${version}";
-      buildInputs = [ tarWrapper python nodejs ]
-        ++ lib.optional (stdenv.isLinux) utillinux
-        ++ lib.optional (stdenv.isDarwin) libtool
-        ++ buildInputs;
-
-      inherit nodejs;
-
-      inherit dontStrip; # Stripping may fail a build for some package deployments
-      inherit dontNpmInstall preRebuild unpackPhase buildPhase;
-
-      compositionScript = composePackage args;
-      pinpointDependenciesScript = pinpointDependenciesOfPackage args;
-
-      passAsFile = [ "compositionScript" "pinpointDependenciesScript" ];
-
-      installPhase = ''
-        source ${installPackage}
-
-        # Create and enter a root node_modules/ folder
-        mkdir -p $out/lib/node_modules
-        cd $out/lib/node_modules
-
-        # Compose the package and all its dependencies
-        source $compositionScriptPath
-
-        ${prepareAndInvokeNPM { inherit packageName bypassCache reconstructLock npmFlags production; }}
-
-        # Create symlink to the deployed executable folder, if applicable
-        if [ -d "$out/lib/node_modules/.bin" ]
-        then
-            ln -s $out/lib/node_modules/.bin $out/bin
-        fi
-
-        # Create symlinks to the deployed manual page folders, if applicable
-        if [ -d "$out/lib/node_modules/${packageName}/man" ]
-        then
-            mkdir -p $out/share
-            for dir in "$out/lib/node_modules/${packageName}/man/"*
-            do
-                mkdir -p $out/share/man/$(basename "$dir")
-                for page in "$dir"/*
-                do
-                    ln -s $page $out/share/man/$(basename "$dir")
-                done
-            done
-        fi
-
-        # Run post install hook, if provided
-        runHook postInstall
-      '';
-
-      meta = {
-        # default to Node.js' platforms
-        platforms = nodejs.meta.platforms;
-      } // meta;
-    } // extraArgs);
-
-  # Builds a node environment (a node_modules folder and a set of binaries)
-  buildNodeDependencies =
-    { name
-    , packageName
-    , version
-    , src
-    , dependencies ? []
-    , buildInputs ? []
-    , production ? true
-    , npmFlags ? ""
-    , dontNpmInstall ? false
-    , bypassCache ? false
-    , reconstructLock ? false
-    , dontStrip ? true
-    , unpackPhase ? "true"
-    , buildPhase ? "true"
-    , ... }@args:
-
-    let
-      extraArgs = removeAttrs args [ "name" "dependencies" "buildInputs" ];
-    in
-      stdenv.mkDerivation ({
-        name = "node-dependencies-${name}-${version}";
-
-        buildInputs = [ tarWrapper python nodejs ]
-          ++ lib.optional (stdenv.isLinux) utillinux
-          ++ lib.optional (stdenv.isDarwin) libtool
-          ++ buildInputs;
-
-        inherit dontStrip; # Stripping may fail a build for some package deployments
-        inherit dontNpmInstall unpackPhase buildPhase;
-
-        includeScript = includeDependencies { inherit dependencies; };
-        pinpointDependenciesScript = pinpointDependenciesOfPackage args;
-
-        passAsFile = [ "includeScript" "pinpointDependenciesScript" ];
-
-        installPhase = ''
-          source ${installPackage}
-
-          mkdir -p $out/${packageName}
-          cd $out/${packageName}
-
-          source $includeScriptPath
-
-          # Create fake package.json to make the npm commands work properly
-          cp ${src}/package.json .
-          chmod 644 package.json
-          ${lib.optionalString bypassCache ''
-            if [ -f ${src}/package-lock.json ]
-            then
-                cp ${src}/package-lock.json .
-            fi
-          ''}
-
-          # Go to the parent folder to make sure that all packages are pinpointed
-          cd ..
-          ${lib.optionalString (builtins.substring 0 1 packageName == "@") "cd .."}
-
-          ${prepareAndInvokeNPM { inherit packageName bypassCache reconstructLock npmFlags production; }}
-
-          # Expose the executables that were installed
-          cd ..
-          ${lib.optionalString (builtins.substring 0 1 packageName == "@") "cd .."}
-
-          mv ${packageName} lib
-          ln -s $out/lib/node_modules/.bin $out/bin
-        '';
-      } // extraArgs);
-
-  # Builds a development shell
-  buildNodeShell =
-    { name
-    , packageName
-    , version
-    , src
-    , dependencies ? []
-    , buildInputs ? []
-    , production ? true
-    , npmFlags ? ""
-    , dontNpmInstall ? false
-    , bypassCache ? false
-    , reconstructLock ? false
-    , dontStrip ? true
-    , unpackPhase ? "true"
-    , buildPhase ? "true"
-    , ... }@args:
-
-    let
-      nodeDependencies = buildNodeDependencies args;
-    in
-    stdenv.mkDerivation {
-      name = "node-shell-${name}-${version}";
-
-      buildInputs = [ python nodejs ] ++ lib.optional (stdenv.isLinux) utillinux ++ buildInputs;
-      buildCommand = ''
-        mkdir -p $out/bin
-        cat > $out/bin/shell <<EOF
-        #! ${stdenv.shell} -e
-        $shellHook
-        exec ${stdenv.shell}
-        EOF
-        chmod +x $out/bin/shell
-      '';
-
-      # Provide the dependencies in a development shell through the NODE_PATH environment variable
-      inherit nodeDependencies;
-      shellHook = lib.optionalString (dependencies != []) ''
-        export NODE_PATH=${nodeDependencies}/lib/node_modules
-        export PATH="${nodeDependencies}/bin:$PATH"
-      '';
-    };
-in
-{
-  buildNodeSourceDist = lib.makeOverridable buildNodeSourceDist;
-  buildNodePackage = lib.makeOverridable buildNodePackage;
-  buildNodeDependencies = lib.makeOverridable buildNodeDependencies;
-  buildNodeShell = lib.makeOverridable buildNodeShell;
-}

cluster/prod/app/cryptpad/build/nix.lock/node-packages.nix

@@ -1,756 +0,0 @@
-# This file has been generated by node2nix 1.9.0. Do not edit!
-
-{nodeEnv, fetchurl, fetchgit, nix-gitignore, stdenv, lib, globalBuildInputs ? []}:
-
-let
-  sources = {
-    "@mcrowe/minibloom-0.2.0" = {
-      name = "_at_mcrowe_slash_minibloom";
-      packageName = "@mcrowe/minibloom";
-      version = "0.2.0";
-      src = fetchurl {
-        url = "https://registry.npmjs.org/@mcrowe/minibloom/-/minibloom-0.2.0.tgz";
-        sha1 = "1bed96aec18388198da37443899b2c3ff5948053";
-      };
-    };
-    "accepts-1.3.8" = {
-      name = "accepts";
-      packageName = "accepts";
-      version = "1.3.8";
-      src = fetchurl {
-        url = "https://registry.npmjs.org/accepts/-/accepts-1.3.8.tgz";
-        sha512 = "PYAthTa2m2VKxuvSD3DPC/Gy+U+sOA1LAuT8mkmRuvw+NACSaeXEQ+NHcVF7rONl6qcaxV3Uuemwawk+7+SJLw==";
-      };
-    };
-    "array-flatten-1.1.1" = {
-      name = "array-flatten";
-      packageName = "array-flatten";
-      version = "1.1.1";
-      src = fetchurl {
-        url = "https://registry.npmjs.org/array-flatten/-/array-flatten-1.1.1.tgz";
-        sha1 = "9a5f699051b1e7073328f2a008968b64ea2955d2";
-      };
-    };
-    "async-limiter-1.0.1" = {
-      name = "async-limiter";
-      packageName = "async-limiter";
-      version = "1.0.1";
-      src = fetchurl {
-        url = "https://registry.npmjs.org/async-limiter/-/async-limiter-1.0.1.tgz";
-        sha512 = "csOlWGAcRFJaI6m+F2WKdnMKr4HhdhFVBk0H/QbJFMCr+uO2kwohwXQPxw/9OCxp05r5ghVBFSyioixx3gfkNQ==";
-      };
-    };
-    "body-parser-1.18.3" = {
-      name = "body-parser";
-      packageName = "body-parser";
-      version = "1.18.3";
-      src = fetchurl {
-        url = "https://registry.npmjs.org/body-parser/-/body-parser-1.18.3.tgz";
-        sha1 = "5b292198ffdd553b3a0f20ded0592b956955c8b4";
-      };
-    };
-    "bytes-3.0.0" = {
-      name = "bytes";
-      packageName = "bytes";
-      version = "3.0.0";
-      src = fetchurl {
-        url = "https://registry.npmjs.org/bytes/-/bytes-3.0.0.tgz";
-        sha1 = "d32815404d689699f85a4ea4fa8755dd13a96048";
-      };
-    };
-    "chainpad-crypto-0.2.7" = {
-      name = "chainpad-crypto";
-      packageName = "chainpad-crypto";
-      version = "0.2.7";
-      src = fetchurl {
-        url = "https://registry.npmjs.org/chainpad-crypto/-/chainpad-crypto-0.2.7.tgz";
-        sha512 = "H2FfFmMwWw4i8XeGVjKUNEmgOnJohlAvc5IpnVnHqCDm6axntpZ15rv9hV70uhzDrmFhlAPW8MoY4roe5PhUyA==";
-      };
-    };
-    "chainpad-server-5.1.0" = {
-      name = "chainpad-server";
-      packageName = "chainpad-server";
-      version = "5.1.0";
-      src = fetchurl {
-        url = "https://registry.npmjs.org/chainpad-server/-/chainpad-server-5.1.0.tgz";
-        sha512 = "BdjgOOLTXXo1EjQ7lURDe7oqsqfQISNvwhILfp3K3diY2K1hxpPLbjYzOSgxNOTADeOAff0xnInR5eUCESVWaQ==";
-      };
-    };
-    "content-disposition-0.5.2" = {
-      name = "content-disposition";
-      packageName = "content-disposition";
-      version = "0.5.2";
-      src = fetchurl {
-        url = "https://registry.npmjs.org/content-disposition/-/content-disposition-0.5.2.tgz";
-        sha1 = "0cf68bb9ddf5f2be7961c3a85178cb85dba78cb4";
-      };
-    };
-    "content-type-1.0.4" = {
-      name = "content-type";
-      packageName = "content-type";
-      version = "1.0.4";
-      src = fetchurl {
-        url = "https://registry.npmjs.org/content-type/-/content-type-1.0.4.tgz";
-        sha512 = "hIP3EEPs8tB9AT1L+NUqtwOAps4mk2Zob89MWXMHjHWg9milF/j4osnnQLXBCBFBk/tvIG/tUc9mOUJiPBhPXA==";
-      };
-    };
-    "cookie-0.3.1" = {
-      name = "cookie";
-      packageName = "cookie";
-      version = "0.3.1";
-      src = fetchurl {
-        url = "https://registry.npmjs.org/cookie/-/cookie-0.3.1.tgz";
-        sha1 = "e7e0a1f9ef43b4c8ba925c5c5a96e806d16873bb";
-      };
-    };
-    "cookie-signature-1.0.6" = {
-      name = "cookie-signature";
-      packageName = "cookie-signature";
-      version = "1.0.6";
-      src = fetchurl {
-        url = "https://registry.npmjs.org/cookie-signature/-/cookie-signature-1.0.6.tgz";
-        sha1 = "e303a882b342cc3ee8ca513a79999734dab3ae2c";
-      };
-    };
-    "debug-2.6.9" = {
-      name = "debug";
-      packageName = "debug";
-      version = "2.6.9";
-      src = fetchurl {
-        url = "https://registry.npmjs.org/debug/-/debug-2.6.9.tgz";
-        sha512 = "bC7ElrdJaJnPbAP+1EotYvqZsb3ecl5wi6Bfi6BJTUcNowp6cvspg0jXznRTKDjm/E7AdgFBVeAPVMNcKGsHMA==";
-      };
-    };
-    "depd-1.1.2" = {
-      name = "depd";
-      packageName = "depd";
-      version = "1.1.2";
-      src = fetchurl {
-        url = "https://registry.npmjs.org/depd/-/depd-1.1.2.tgz";
-        sha1 = "9bcd52e14c097763e749b274c4346ed2e560b5a9";
-      };
-    };
-    "destroy-1.0.4" = {
-      name = "destroy";
-      packageName = "destroy";
-      version = "1.0.4";
-      src = fetchurl {
-        url = "https://registry.npmjs.org/destroy/-/destroy-1.0.4.tgz";
-        sha1 = "978857442c44749e4206613e37946205826abd80";
-      };
-    };
-    "ee-first-1.1.1" = {
-      name = "ee-first";
-      packageName = "ee-first";
-      version = "1.1.1";
-      src = fetchurl {
-        url = "https://registry.npmjs.org/ee-first/-/ee-first-1.1.1.tgz";
-        sha1 = "590c61156b0ae2f4f0255732a158b266bc56b21d";
-      };
-    };
-    "encodeurl-1.0.2" = {
-      name = "encodeurl";
-      packageName = "encodeurl";
-      version = "1.0.2";
-      src = fetchurl {
-        url = "https://registry.npmjs.org/encodeurl/-/encodeurl-1.0.2.tgz";
-        sha1 = "ad3ff4c86ec2d029322f5a02c3a9a606c95b3f59";
-      };
-    };
-    "escape-html-1.0.3" = {
-      name = "escape-html";
-      packageName = "escape-html";
-      version = "1.0.3";
-      src = fetchurl {
-        url = "https://registry.npmjs.org/escape-html/-/escape-html-1.0.3.tgz";
-        sha1 = "0258eae4d3d0c0974de1c169188ef0051d1d1988";
-      };
-    };
-    "etag-1.8.1" = {
-      name = "etag";
-      packageName = "etag";
-      version = "1.8.1";
-      src = fetchurl {
-        url = "https://registry.npmjs.org/etag/-/etag-1.8.1.tgz";
-        sha1 = "41ae2eeb65efa62268aebfea83ac7d79299b0887";
-      };
-    };
-    "express-4.16.4" = {
-      name = "express";
-      packageName = "express";
-      version = "4.16.4";
-      src = fetchurl {
-        url = "https://registry.npmjs.org/express/-/express-4.16.4.tgz";
-        sha512 = "j12Uuyb4FMrd/qQAm6uCHAkPtO8FDTRJZBDd5D2KOL2eLaz1yUNdUB/NOIyq0iU4q4cFarsUCrnFDPBcnksuOg==";
-      };
-    };
-    "finalhandler-1.1.1" = {
-      name = "finalhandler";
-      packageName = "finalhandler";
-      version = "1.1.1";
-      src = fetchurl {
-        url = "https://registry.npmjs.org/finalhandler/-/finalhandler-1.1.1.tgz";
-        sha512 = "Y1GUDo39ez4aHAw7MysnUD5JzYX+WaIj8I57kO3aEPT1fFRL4sr7mjei97FgnwhAyyzRYmQZaTHb2+9uZ1dPtg==";
-      };
-    };
-    "forwarded-0.2.0" = {
-      name = "forwarded";
-      packageName = "forwarded";
-      version = "0.2.0";
-      src = fetchurl {
-        url = "https://registry.npmjs.org/forwarded/-/forwarded-0.2.0.tgz";
-        sha512 = "buRG0fpBtRHSTCOASe6hD258tEubFoRLb4ZNA6NxMVHNw2gOcwHo9wyablzMzOA5z9xA9L1KNjk/Nt6MT9aYow==";
-      };
-    };
-    "fresh-0.5.2" = {
-      name = "fresh";
-      packageName = "fresh";
-      version = "0.5.2";
-      src = fetchurl {
-        url = "https://registry.npmjs.org/fresh/-/fresh-0.5.2.tgz";
-        sha1 = "3d8cadd90d976569fa835ab1f8e4b23a105605a7";
-      };
-    };
-    "fs-extra-7.0.1" = {
-      name = "fs-extra";
-      packageName = "fs-extra";
-      version = "7.0.1";
-      src = fetchurl {
-        url = "https://registry.npmjs.org/fs-extra/-/fs-extra-7.0.1.tgz";
-        sha512 = "YJDaCJZEnBmcbw13fvdAM9AwNOJwOzrE4pqMqBq5nFiEqXUqHwlK4B+3pUw6JNvfSPtX05xFHtYy/1ni01eGCw==";
-      };
-    };
-    "gar-1.0.4" = {
-      name = "gar";
-      packageName = "gar";
-      version = "1.0.4";
-      src = fetchurl {
-        url = "https://registry.npmjs.org/gar/-/gar-1.0.4.tgz";
-        sha512 = "w4n9cPWyP7aHxKxYHFQMegj7WIAsL/YX/C4Bs5Rr8s1H9M1rNtRWRsw+ovYMkXDQ5S4ZbYHsHAPmevPjPgw44w==";
-      };
-    };
-    "get-folder-size-2.0.1" = {
-      name = "get-folder-size";
-      packageName = "get-folder-size";
-      version = "2.0.1";
-      src = fetchurl {
-        url = "https://registry.npmjs.org/get-folder-size/-/get-folder-size-2.0.1.tgz";
-        sha512 = "+CEb+GDCM7tkOS2wdMKTn9vU7DgnKUTuDlehkNJKNSovdCOVxs14OfKCk4cvSaR3za4gj+OBdl9opPN9xrJ0zA==";
-      };
-    };
-    "graceful-fs-4.2.10" = {
-      name = "graceful-fs";
-      packageName = "graceful-fs";
-      version = "4.2.10";
-      src = fetchurl {
-        url = "https://registry.npmjs.org/graceful-fs/-/graceful-fs-4.2.10.tgz";
-        sha512 = "9ByhssR2fPVsNZj478qUUbKfmL0+t5BDVyjShtyZZLiK7ZDAArFFfopyOTj0M05wE2tJPisA4iTnnXl2YoPvOA==";
-      };
-    };
-    "http-errors-1.6.3" = {
-      name = "http-errors";
-      packageName = "http-errors";
-      version = "1.6.3";
-      src = fetchurl {
-        url = "https://registry.npmjs.org/http-errors/-/http-errors-1.6.3.tgz";
-        sha1 = "8b55680bb4be283a0b5bf4ea2e38580be1d9320d";
-      };
-    };
-    "iconv-lite-0.4.23" = {
-      name = "iconv-lite";
-      packageName = "iconv-lite";
-      version = "0.4.23";
-      src = fetchurl {
-        url = "https://registry.npmjs.org/iconv-lite/-/iconv-lite-0.4.23.tgz";
-        sha512 = "neyTUVFtahjf0mB3dZT77u+8O0QB89jFdnBkd5P1JgYPbPaia3gXXOVL2fq8VyU2gMMD7SaN7QukTB/pmXYvDA==";
-      };
-    };
-    "inherits-2.0.3" = {
-      name = "inherits";
-      packageName = "inherits";
-      version = "2.0.3";
-      src = fetchurl {
-        url = "https://registry.npmjs.org/inherits/-/inherits-2.0.3.tgz";
-        sha1 = "633c2c83e3da42a502f52466022480f4208261de";
-      };
-    };
-    "ipaddr.js-1.9.1" = {
-      name = "ipaddr.js";
-      packageName = "ipaddr.js";
-      version = "1.9.1";
-      src = fetchurl {
-        url = "https://registry.npmjs.org/ipaddr.js/-/ipaddr.js-1.9.1.tgz";
-        sha512 = "0KI/607xoxSToH7GjN1FfSbLoU0+btTicjsQSWQlh/hZykN8KpmMf7uYwPW3R+akZ6R/w18ZlXSHBYXiYUPO3g==";
-      };
-    };
-    "jsonfile-4.0.0" = {
-      name = "jsonfile";
-      packageName = "jsonfile";
-      version = "4.0.0";
-      src = fetchurl {
-        url = "https://registry.npmjs.org/jsonfile/-/jsonfile-4.0.0.tgz";
-        sha1 = "8771aae0799b64076b76640fca058f9c10e33ecb";
-      };
-    };
-    "lex-1.7.9" = {
-      name = "lex";
-      packageName = "lex";
-      version = "1.7.9";
-      src = fetchurl {
-        url = "https://registry.npmjs.org/lex/-/lex-1.7.9.tgz";
-        sha1 = "5d5636ccef574348362938b79a47f0eed8ed0d43";
-      };
-    };
-    "looper-3.0.0" = {
-      name = "looper";
-      packageName = "looper";
-      version = "3.0.0";
-      src = fetchurl {
-        url = "https://registry.npmjs.org/looper/-/looper-3.0.0.tgz";
-        sha1 = "2efa54c3b1cbaba9b94aee2e5914b0be57fbb749";
-      };
-    };
-    "media-typer-0.3.0" = {
-      name = "media-typer";
-      packageName = "media-typer";
-      version = "0.3.0";
-      src = fetchurl {
-        url = "https://registry.npmjs.org/media-typer/-/media-typer-0.3.0.tgz";
-        sha1 = "8710d7af0aa626f8fffa1ce00168545263255748";
-      };
-    };
-    "merge-descriptors-1.0.1" = {
-      name = "merge-descriptors";
-      packageName = "merge-descriptors";
-      version = "1.0.1";
-      src = fetchurl {
-        url = "https://registry.npmjs.org/merge-descriptors/-/merge-descriptors-1.0.1.tgz";
-        sha1 = "b00aaa556dd8b44568150ec9d1b953f3f90cbb61";
-      };
-    };
-    "methods-1.1.2" = {
-      name = "methods";
-      packageName = "methods";
-      version = "1.1.2";
-      src = fetchurl {
-        url = "https://registry.npmjs.org/methods/-/methods-1.1.2.tgz";
-        sha1 = "5529a4d67654134edcc5266656835b0f851afcee";
-      };
-    };
-    "mime-1.4.1" = {
-      name = "mime";
-      packageName = "mime";
-      version = "1.4.1";
-      src = fetchurl {
-        url = "https://registry.npmjs.org/mime/-/mime-1.4.1.tgz";
-        sha512 = "KI1+qOZu5DcW6wayYHSzR/tXKCDC5Om4s1z2QJjDULzLcmf3DvzS7oluY4HCTrc+9FiKmWUgeNLg7W3uIQvxtQ==";
-      };
-    };
-    "mime-db-1.52.0" = {
-      name = "mime-db";
-      packageName = "mime-db";
-      version = "1.52.0";
-      src = fetchurl {
-        url = "https://registry.npmjs.org/mime-db/-/mime-db-1.52.0.tgz";
-        sha512 = "sPU4uV7dYlvtWJxwwxHD0PuihVNiE7TyAbQ5SWxDCB9mUYvOgroQOwYQQOKPJ8CIbE+1ETVlOoK1UC2nU3gYvg==";
-      };
-    };
-    "mime-types-2.1.35" = {
-      name = "mime-types";
-      packageName = "mime-types";
-      version = "2.1.35";
-      src = fetchurl {
-        url = "https://registry.npmjs.org/mime-types/-/mime-types-2.1.35.tgz";
-        sha512 = "ZDY+bPm5zTTF+YpCrAU9nK0UgICYPT0QtT1NZWFv4s++TNkcgVaT0g6+4R2uI4MjQjzysHB1zxuWL50hzaeXiw==";
-      };
-    };
-    "ms-2.0.0" = {
-      name = "ms";
-      packageName = "ms";
-      version = "2.0.0";
-      src = fetchurl {
-        url = "https://registry.npmjs.org/ms/-/ms-2.0.0.tgz";
-        sha1 = "5608aeadfc00be6c2901df5f9861788de0d597c8";
-      };
-    };
-    "negotiator-0.6.3" = {
-      name = "negotiator";
-      packageName = "negotiator";
-      version = "0.6.3";
-      src = fetchurl {
-        url = "https://registry.npmjs.org/negotiator/-/negotiator-0.6.3.tgz";
-        sha512 = "+EUsqGPLsM+j/zdChZjsnX51g4XrHFOIXwfnCVPGlQk/k5giakcKsuxCObBRu6DSm9opw/O6slWbJdghQM4bBg==";
-      };
-    };
-    "netflux-websocket-0.1.21" = {
-      name = "netflux-websocket";
-      packageName = "netflux-websocket";
-      version = "0.1.21";
-      src = fetchurl {
-        url = "https://registry.npmjs.org/netflux-websocket/-/netflux-websocket-0.1.21.tgz";
-        sha512 = "Zjl5lefg8urC0a0T7YCPGiUgRsISZBsTZl1STylmQz8Bq4ohcZ8cP3r6VoCpeVcvJ1Y/e3ZCXPxndWlNP9Jfug==";
-      };
-    };
-    "nthen-0.1.8" = {
-      name = "nthen";
-      packageName = "nthen";
-      version = "0.1.8";
-      src = fetchurl {
-        url = "https://registry.npmjs.org/nthen/-/nthen-0.1.8.tgz";
-        sha512 = "Oh2CwIbhj+wUT94lQV7LKmmgw3UYAGGd8oLIqp6btQN3Bz3PuWp4BuvtUo35H3rqDknjPfKx5P6mt7v+aJNjcw==";
-      };
-    };
-    "on-finished-2.3.0" = {
-      name = "on-finished";
-      packageName = "on-finished";
-      version = "2.3.0";
-      src = fetchurl {
-        url = "https://registry.npmjs.org/on-finished/-/on-finished-2.3.0.tgz";
-        sha1 = "20f1336481b083cd75337992a16971aa2d906947";
-      };
-    };
-    "parseurl-1.3.3" = {
-      name = "parseurl";
-      packageName = "parseurl";
-      version = "1.3.3";
-      src = fetchurl {
-        url = "https://registry.npmjs.org/parseurl/-/parseurl-1.3.3.tgz";
-        sha512 = "CiyeOxFT/JZyN5m0z9PfXw4SCBJ6Sygz1Dpl0wqjlhDEGGBP1GnsUVEL0p63hoG1fcj3fHynXi9NYO4nWOL+qQ==";
-      };
-    };
-    "path-to-regexp-0.1.7" = {
-      name = "path-to-regexp";
-      packageName = "path-to-regexp";
-      version = "0.1.7";
-      src = fetchurl {
-        url = "https://registry.npmjs.org/path-to-regexp/-/path-to-regexp-0.1.7.tgz";
-        sha1 = "df604178005f522f15eb4490e7247a1bfaa67f8c";
-      };
-    };
-    "proxy-addr-2.0.7" = {
-      name = "proxy-addr";
-      packageName = "proxy-addr";
-      version = "2.0.7";
-      src = fetchurl {
-        url = "https://registry.npmjs.org/proxy-addr/-/proxy-addr-2.0.7.tgz";
-        sha512 = "llQsMLSUDUPT44jdrU/O37qlnifitDP+ZwrmmZcoSKyLKvtZxpyV0n2/bD/N4tBAAZ/gJEdZU7KMraoK1+XYAg==";
-      };
-    };
-    "pull-stream-3.6.14" = {
-      name = "pull-stream";
-      packageName = "pull-stream";
-      version = "3.6.14";
-      src = fetchurl {
-        url = "https://registry.npmjs.org/pull-stream/-/pull-stream-3.6.14.tgz";
-        sha512 = "KIqdvpqHHaTUA2mCYcLG1ibEbu/LCKoJZsBWyv9lSYtPkJPBq8m3Hxa103xHi6D2thj5YXa0TqK3L3GUkwgnew==";
-      };
-    };
-    "qs-6.5.2" = {
-      name = "qs";
-      packageName = "qs";
-      version = "6.5.2";
-      src = fetchurl {
-        url = "https://registry.npmjs.org/qs/-/qs-6.5.2.tgz";
-        sha512 = "N5ZAX4/LxJmF+7wN74pUD6qAh9/wnvdQcjq9TZjevvXzSUo7bfmw91saqMjzGS2xq91/odN2dW/WOl7qQHNDGA==";
-      };
-    };
-    "range-parser-1.2.1" = {
-      name = "range-parser";
-      packageName = "range-parser";
-      version = "1.2.1";
-      src = fetchurl {
-        url = "https://registry.npmjs.org/range-parser/-/range-parser-1.2.1.tgz";
-        sha512 = "Hrgsx+orqoygnmhFbKaHE6c296J+HTAQXoxEF6gNupROmmGJRoyzfG3ccAveqCBrwr/2yxQ5BVd/GTl5agOwSg==";
-      };
-    };
-    "raw-body-2.3.3" = {
-      name = "raw-body";
-      packageName = "raw-body";
-      version = "2.3.3";
-      src = fetchurl {
-        url = "https://registry.npmjs.org/raw-body/-/raw-body-2.3.3.tgz";
-        sha512 = "9esiElv1BrZoI3rCDuOuKCBRbuApGGaDPQfjSflGxdy4oyzqghxu6klEkkVIvBje+FF0BX9coEv8KqW6X/7njw==";
-      };
-    };
-    "safe-buffer-5.1.2" = {
-      name = "safe-buffer";
-      packageName = "safe-buffer";
-      version = "5.1.2";
-      src = fetchurl {
-        url = "https://registry.npmjs.org/safe-buffer/-/safe-buffer-5.1.2.tgz";
-        sha512 = "Gd2UZBJDkXlY7GbJxfsE8/nvKkUEU1G38c1siN6QP6a9PT9MmHB8GnpscSmMJSoF8LOIrt8ud/wPtojys4G6+g==";
-      };
-    };
-    "safer-buffer-2.1.2" = {
-      name = "safer-buffer";
-      packageName = "safer-buffer";
-      version = "2.1.2";
-      src = fetchurl {
-        url = "https://registry.npmjs.org/safer-buffer/-/safer-buffer-2.1.2.tgz";
-        sha512 = "YZo3K82SD7Riyi0E1EQPojLz7kpepnSQI9IyPbHHg1XXXevb5dJI7tpyN2ADxGcQbHG7vcyRHk0cbwqcQriUtg==";
-      };
-    };
-    "saferphore-0.0.1" = {
-      name = "saferphore";
-      packageName = "saferphore";
-      version = "0.0.1";
-      src = fetchurl {
-        url = "https://registry.npmjs.org/saferphore/-/saferphore-0.0.1.tgz";
-        sha1 = "cc962eda4e2b2452e6437fd32dcfb6f69ef2ea63";
-      };
-    };
-    "send-0.16.2" = {
-      name = "send";
-      packageName = "send";
-      version = "0.16.2";
-      src = fetchurl {
-        url = "https://registry.npmjs.org/send/-/send-0.16.2.tgz";
-        sha512 = "E64YFPUssFHEFBvpbbjr44NCLtI1AohxQ8ZSiJjQLskAdKuriYEP6VyGEsRDH8ScozGpkaX1BGvhanqCwkcEZw==";
-      };
-    };
-    "serve-static-1.13.2" = {
-      name = "serve-static";
-      packageName = "serve-static";
-      version = "1.13.2";
-      src = fetchurl {
-        url = "https://registry.npmjs.org/serve-static/-/serve-static-1.13.2.tgz";
-        sha512 = "p/tdJrO4U387R9oMjb1oj7qSMaMfmOyd4j9hOFoxZe2baQszgHcSWjuya/CiT5kgZZKRudHNOA0pYXOl8rQ5nw==";
-      };
-    };
-    "setprototypeof-1.1.0" = {
-      name = "setprototypeof";
-      packageName = "setprototypeof";
-      version = "1.1.0";
-      src = fetchurl {
-        url = "https://registry.npmjs.org/setprototypeof/-/setprototypeof-1.1.0.tgz";
-        sha512 = "BvE/TwpZX4FXExxOxZyRGQQv651MSwmWKZGqvmPcRIjDqWub67kTKuIMx43cZZrS/cBBzwBcNDWoFxt2XEFIpQ==";
-      };
-    };
-    "sortify-1.0.4" = {
-      name = "sortify";
-      packageName = "sortify";
-      version = "1.0.4";
-      src = fetchurl {
-        url = "https://registry.npmjs.org/sortify/-/sortify-1.0.4.tgz";
-        sha1 = "f0178687c83231be8a34fc0ec5462ea957b60284";
-      };
-    };
-    "statuses-1.4.0" = {
-      name = "statuses";
-      packageName = "statuses";
-      version = "1.4.0";
-      src = fetchurl {
-        url = "https://registry.npmjs.org/statuses/-/statuses-1.4.0.tgz";
-        sha512 = "zhSCtt8v2NDrRlPQpCNtw/heZLtfUDqxBM1udqikb/Hbk52LK4nQSwr10u77iopCW5LsyHpuXS0GnEc48mLeew==";
-      };
-    };
-    "stream-to-pull-stream-1.7.3" = {
-      name = "stream-to-pull-stream";
-      packageName = "stream-to-pull-stream";
-      version = "1.7.3";
-      src = fetchurl {
-        url = "https://registry.npmjs.org/stream-to-pull-stream/-/stream-to-pull-stream-1.7.3.tgz";
-        sha512 = "6sNyqJpr5dIOQdgNy/xcDWwDuzAsAwVzhzrWlAPAQ7Lkjx/rv0wgvxEyKwTq6FmNd5rjTrELt/CLmaSw7crMGg==";
-      };
-    };
-    "tiny-each-async-2.0.3" = {
-      name = "tiny-each-async";
-      packageName = "tiny-each-async";
-      version = "2.0.3";
-      src = fetchurl {
-        url = "https://registry.npmjs.org/tiny-each-async/-/tiny-each-async-2.0.3.tgz";
-        sha1 = "8ebbbfd6d6295f1370003fbb37162afe5a0a51d1";
-      };
-    };
-    "tweetnacl-0.12.2" = {
-      name = "tweetnacl";
-      packageName = "tweetnacl";
-      version = "0.12.2";
-      src = fetchurl {
-        url = "https://registry.npmjs.org/tweetnacl/-/tweetnacl-0.12.2.tgz";
-        sha1 = "bd59f890507856fb0a1136acc3a8b44547e29ddb";
-      };
-    };
-    "type-is-1.6.18" = {
-      name = "type-is";
-      packageName = "type-is";
-      version = "1.6.18";
-      src = fetchurl {
-        url = "https://registry.npmjs.org/type-is/-/type-is-1.6.18.tgz";
-        sha512 = "TkRKr9sUTxEH8MdfuCSP7VizJyzRNMjj2J2do2Jr3Kym598JVdEksuzPQCnlFPW4ky9Q+iA+ma9BGm06XQBy8g==";
-      };
-    };
-    "ulimit-0.0.2" = {
-      name = "ulimit";
-      packageName = "ulimit";
-      version = "0.0.2";
-      src = fetchurl {
-        url = "https://registry.npmjs.org/ulimit/-/ulimit-0.0.2.tgz";
-        sha1 = "2b51f9dc8381ae4102636cec5eb338c2630588a0";
-      };
-    };
-    "ultron-1.1.1" = {
-      name = "ultron";
-      packageName = "ultron";
-      version = "1.1.1";
-      src = fetchurl {
-        url = "https://registry.npmjs.org/ultron/-/ultron-1.1.1.tgz";
-        sha512 = "UIEXBNeYmKptWH6z8ZnqTeS8fV74zG0/eRU9VGkpzz+LIJNs8W/zM/L+7ctCkRrgbNnnR0xxw4bKOr0cW0N0Og==";
-      };
-    };
-    "universalify-0.1.2" = {
-      name = "universalify";
-      packageName = "universalify";
-      version = "0.1.2";
-      src = fetchurl {
-        url = "https://registry.npmjs.org/universalify/-/universalify-0.1.2.tgz";
-        sha512 = "rBJeI5CXAlmy1pV+617WB9J63U6XcazHHF2f2dbJix4XzpUF0RS3Zbj0FGIOCAva5P/d/GBOYaACQ1w+0azUkg==";
-      };
-    };
-    "unpipe-1.0.0" = {
-      name = "unpipe";
-      packageName = "unpipe";
-      version = "1.0.0";
-      src = fetchurl {
-        url = "https://registry.npmjs.org/unpipe/-/unpipe-1.0.0.tgz";
-        sha1 = "b2bf4ee8514aae6165b4817829d21b2ef49904ec";
-      };
-    };
-    "utils-merge-1.0.1" = {
-      name = "utils-merge";
-      packageName = "utils-merge";
-      version = "1.0.1";
-      src = fetchurl {
-        url = "https://registry.npmjs.org/utils-merge/-/utils-merge-1.0.1.tgz";
-        sha1 = "9f95710f50a267947b2ccc124741c1028427e713";
-      };
-    };
-    "vary-1.1.2" = {
-      name = "vary";
-      packageName = "vary";
-      version = "1.1.2";
-      src = fetchurl {
-        url = "https://registry.npmjs.org/vary/-/vary-1.1.2.tgz";
-        sha1 = "2299f02c6ded30d4a5961b0b9f74524a18f634fc";
-      };
-    };
-    "ws-3.3.3" = {
-      name = "ws";
-      packageName = "ws";
-      version = "3.3.3";
-      src = fetchurl {
-        url = "https://registry.npmjs.org/ws/-/ws-3.3.3.tgz";
-        sha512 = "nnWLa/NwZSt4KQJu51MYlCcSQ5g7INpOrOMt4XV8j4dqTXdmlUmSHQ8/oLC069ckre0fRsgfvsKwbTdtKLCDkA==";
-      };
-    };
-  };
-  args = {
-    name = "cryptpad";
-    packageName = "cryptpad";
-    version = "4.14.1";
-    src = ./.;
-    dependencies = [
-      sources."@mcrowe/minibloom-0.2.0"
-      sources."accepts-1.3.8"
-      sources."array-flatten-1.1.1"
-      sources."async-limiter-1.0.1"
-      sources."body-parser-1.18.3"
-      sources."bytes-3.0.0"
-      sources."chainpad-crypto-0.2.7"
-      sources."chainpad-server-5.1.0"
-      sources."content-disposition-0.5.2"
-      sources."content-type-1.0.4"
-      sources."cookie-0.3.1"
-      sources."cookie-signature-1.0.6"
-      sources."debug-2.6.9"
-      sources."depd-1.1.2"
-      sources."destroy-1.0.4"
-      sources."ee-first-1.1.1"
-      sources."encodeurl-1.0.2"
-      sources."escape-html-1.0.3"
-      sources."etag-1.8.1"
-      sources."express-4.16.4"
-      sources."finalhandler-1.1.1"
-      sources."forwarded-0.2.0"
-      sources."fresh-0.5.2"
-      sources."fs-extra-7.0.1"
-      sources."gar-1.0.4"
-      sources."get-folder-size-2.0.1"
-      sources."graceful-fs-4.2.10"
-      sources."http-errors-1.6.3"
-      sources."iconv-lite-0.4.23"
-      sources."inherits-2.0.3"
-      sources."ipaddr.js-1.9.1"
-      sources."jsonfile-4.0.0"
-      sources."lex-1.7.9"
-      sources."looper-3.0.0"
-      sources."media-typer-0.3.0"
-      sources."merge-descriptors-1.0.1"
-      sources."methods-1.1.2"
-      sources."mime-db-1.52.0"
-      sources."mime-types-2.1.35"
-      sources."ms-2.0.0"
-      sources."negotiator-0.6.3"
-      sources."netflux-websocket-0.1.21"
-      sources."nthen-0.1.8"
-      sources."on-finished-2.3.0"
-      sources."parseurl-1.3.3"
-      sources."path-to-regexp-0.1.7"
-      sources."proxy-addr-2.0.7"
-      sources."pull-stream-3.6.14"
-      sources."qs-6.5.2"
-      sources."range-parser-1.2.1"
-      sources."raw-body-2.3.3"
-      sources."safe-buffer-5.1.2"
-      sources."safer-buffer-2.1.2"
-      sources."saferphore-0.0.1"
-      (sources."send-0.16.2" // {
-        dependencies = [
-          sources."mime-1.4.1"
-        ];
-      })
-      sources."serve-static-1.13.2"
-      sources."setprototypeof-1.1.0"
-      sources."sortify-1.0.4"
-      sources."statuses-1.4.0"
-      sources."stream-to-pull-stream-1.7.3"
-      sources."tiny-each-async-2.0.3"
-      sources."tweetnacl-0.12.2"
-      sources."type-is-1.6.18"
-      sources."ulimit-0.0.2"
-      sources."ultron-1.1.1"
-      sources."universalify-0.1.2"
-      sources."unpipe-1.0.0"
-      sources."utils-merge-1.0.1"
-      sources."vary-1.1.2"
-      sources."ws-3.3.3"
-    ];
-    buildInputs = globalBuildInputs;
-    meta = {
-      description = "realtime collaborative visual editor with zero knowlege server";
-      license = "AGPL-3.0+";
-    };
-    production = true;
-    bypassCache = true;
-    reconstructLock = false;
-  };
-in
-{
-  args = args;
-  sources = sources;
-  tarball = nodeEnv.buildNodeSourceDist args;
-  package = nodeEnv.buildNodePackage args;
-  shell = nodeEnv.buildNodeShell args;
-  nodeDependencies = nodeEnv.buildNodeDependencies (lib.overrideExisting args {
-    src = stdenv.mkDerivation {
-      name = args.name + "-package-json";
-      src = nix-gitignore.gitignoreSourcePure [
-        "*"
-        "!package.json"
-        "!package-lock.json"
-      ] args.src;
-      dontBuild = true;
-      installPhase = "mkdir -p $out; cp -r ./* $out;";
-    };
-  });
-}

cluster/prod/app/cryptpad/build/nix.lock/npm.nix

@@ -1,17 +0,0 @@
-# This file has been generated by node2nix 1.9.0. Do not edit!
-
-{pkgs ? import <nixpkgs> {
-    inherit system;
-  }, system ? builtins.currentSystem, nodejs ? pkgs."nodejs-12_x"}:
-
-let
-  nodeEnv = import ./node-env.nix {
-    inherit (pkgs) stdenv lib python2 runCommand writeTextFile writeShellScript;
-    inherit pkgs nodejs;
-    libtool = if pkgs.stdenv.isDarwin then pkgs.darwin.cctools else null;
-  };
-in
-import ./node-packages.nix {
-  inherit (pkgs) fetchurl nix-gitignore stdenv lib fetchgit;
-  inherit nodeEnv;
-}

cluster/prod/app/cryptpad/build/nix.lock/package.json

@@ -1,55 +0,0 @@
-{
-  "name": "cryptpad",
-  "description": "realtime collaborative visual editor with zero knowlege server",
-  "version": "4.14.1",
-  "license": "AGPL-3.0+",
-  "repository": {
-    "type": "git",
-    "url": "git+https://github.com/xwiki-labs/cryptpad.git"
-  },
-  "funding": {
-    "type": "opencollective",
-    "url": "https://opencollective.com/cryptpad"
-  },
-  "dependencies": {
-    "@mcrowe/minibloom": "^0.2.0",
-    "chainpad-crypto": "^0.2.5",
-    "chainpad-server": "^5.1.0",
-    "express": "~4.16.0",
-    "fs-extra": "^7.0.0",
-    "get-folder-size": "^2.0.1",
-    "netflux-websocket": "^0.1.20",
-    "nthen": "0.1.8",
-    "pull-stream": "^3.6.1",
-    "saferphore": "0.0.1",
-    "sortify": "^1.0.4",
-    "stream-to-pull-stream": "^1.7.2",
-    "tweetnacl": "~0.12.2",
-    "ulimit": "0.0.2",
-    "ws": "^3.3.1"
-  },
-  "devDependencies": {
-    "jshint": "^2.13.4",
-    "less": "3.7.1",
-    "lesshint": "6.3.7",
-    "selenium-webdriver": "^3.6.0"
-  },
-  "scripts": {
-    "start": "node server.js",
-    "dev": "DEV=1 node server.js",
-    "fresh": "FRESH=1 node server.js",
-    "offline": "FRESH=1 OFFLINE=1 node server.js",
-    "offlinedev": "DEV=1 OFFLINE=1 node server.js",
-    "package": "PACKAGE=1 node server.js",
-    "lint": "jshint --config .jshintrc --exclude-path .jshintignore . && ./node_modules/lesshint/bin/lesshint -c ./.lesshintrc ./customize.dist/src/less2/",
-    "lint:js": "jshint --config .jshintrc --exclude-path .jshintignore .",
-    "lint:server": "jshint --config .jshintrc lib",
-    "lint:less": "./node_modules/lesshint/bin/lesshint -c ./.lesshintrc ./customize.dist/src/less2/",
-    "lint:translations": "node ./scripts/translations/lint-translations.js",
-    "unused-translations": "node ./scripts/translations/unused-translations.js",
-    "test": "node scripts/TestSelenium.js",
-    "test-rpc": "cd scripts/tests && node test-rpc",
-    "template": "cd customize.dist/src && for page in ../index.html ../privacy.html ../terms.html ../contact.html ../what-is-cryptpad.html ../features.html ../../www/login/index.html ../../www/register/index.html ../../www/user/index.html;do echo $page; cp template.html $page; done;",
-    "evict-inactive": "node scripts/evict-inactive.js"
-  }
-}

cluster/prod/app/cryptpad/build/npins/default.nix

@@ -0,0 +1,80 @@
+# Generated by npins. Do not modify; will be overwritten regularly
+let
+  data = builtins.fromJSON (builtins.readFile ./sources.json);
+  version = data.version;
+
+  mkSource =
+    spec:
+    assert spec ? type;
+    let
+      path =
+        if spec.type == "Git" then
+          mkGitSource spec
+        else if spec.type == "GitRelease" then
+          mkGitSource spec
+        else if spec.type == "PyPi" then
+          mkPyPiSource spec
+        else if spec.type == "Channel" then
+          mkChannelSource spec
+        else
+          builtins.throw "Unknown source type ${spec.type}";
+    in
+    spec // { outPath = path; };
+
+  mkGitSource =
+    {
+      repository,
+      revision,
+      url ? null,
+      hash,
+      branch ? null,
+      ...
+    }:
+    assert repository ? type;
+    # At the moment, either it is a plain git repository (which has an url), or it is a GitHub/GitLab repository
+    # In the latter case, there we will always be an url to the tarball
+    if url != null then
+      (builtins.fetchTarball {
+        inherit url;
+        sha256 = hash; # FIXME: check nix version & use SRI hashes
+      })
+    else
+      assert repository.type == "Git";
+      let
+        urlToName =
+          url: rev:
+          let
+            matched = builtins.match "^.*/([^/]*)(\\.git)?$" repository.url;
+
+            short = builtins.substring 0 7 rev;
+
+            appendShort = if (builtins.match "[a-f0-9]*" rev) != null then "-${short}" else "";
+          in
+          "${if matched == null then "source" else builtins.head matched}${appendShort}";
+        name = urlToName repository.url revision;
+      in
+      builtins.fetchGit {
+        url = repository.url;
+        rev = revision;
+        inherit name;
+        # hash = hash;
+      };
+
+  mkPyPiSource =
+    { url, hash, ... }:
+    builtins.fetchurl {
+      inherit url;
+      sha256 = hash;
+    };
+
+  mkChannelSource =
+    { url, hash, ... }:
+    builtins.fetchTarball {
+      inherit url;
+      sha256 = hash;
+    };
+in
+if version == 3 then
+  builtins.mapAttrs (_: mkSource) data.pins
+else
+  throw "Unsupported format version ${toString version} in sources.json. Try running `npins upgrade`"

cluster/prod/app/cryptpad/build/npins/sources.json

@@ -0,0 +1,11 @@
+{
+  "pins": {
+    "nixpkgs": {
+      "type": "Channel",
+      "name": "nixos-24.05",
+      "url": "https://releases.nixos.org/nixos/24.05/nixos-24.05.5385.1719f27dd95f/nixexprs.tar.xz",
+      "hash": "0f7i315g1z8kjh10hvj2zv7y2vfqxmwvd96hwlcrr8aig6qq5gzm"
+    }
+  },
+  "version": 3
+}

cluster/prod/app/cryptpad/build/shell.nix

@@ -1,31 +0,0 @@
-let
-  common = import ./common.nix;
-  pkgs = import common.pkgsSrc {};
-
-  bower2nixRepo = (import common.bower2nixSrc {
-    inherit pkgs;
-  });  
-  bower2nix = bower2nixRepo // {
-    package = bower2nixRepo.package.override {
-      postInstall = "tsc";
-    };
-  };
-in
-  pkgs.mkShell {
-    nativeBuildInputs = [
-      bower2nix.package
-      pkgs.nodePackages.node2nix
-    ];
-
-    shellHook = ''
-function update_lock {
-  set -exuo pipefail
-  mkdir -p nix.lock
-  ${pkgs.wget}/bin/wget https://raw.githubusercontent.com/xwiki-labs/cryptpad/${common.cryptpadCommit}/package.json -O nix.lock/package.json
-  ${pkgs.wget}/bin/wget https://raw.githubusercontent.com/xwiki-labs/cryptpad/${common.cryptpadCommit}/package-lock.json -O nix.lock/package-lock.json
-  ${pkgs.wget}/bin/wget https://raw.githubusercontent.com/xwiki-labs/cryptpad/${common.cryptpadCommit}/bower.json -O nix.lock/bower.json
-  ${bower2nix.package}/bin/bower2nix nix.lock/bower.json nix.lock/bower.nix
-  ${pkgs.nodePackages.node2nix}/bin/node2nix --input nix.lock/package.json --lock nix.lock/package-lock.json --composition nix.lock/npm.nix --node-env nix.lock/node-env.nix --output nix.lock/node-packages.nix
-}
-    '';
-  }

cluster/prod/app/cryptpad/build_docker/Dockerfile

@@ -0,0 +1,59 @@
+# SPDX-FileCopyrightText: 2023 XWiki CryptPad Team <contact@cryptpad.org> and contributors
+#
+# SPDX-License-Identifier: AGPL-3.0-or-later
+#
+# Tweaks by Deuxfleurs
+
+# Multistage build to reduce image size and increase security
+FROM node:lts-slim AS build
+ENV DEBIAN_FRONTEND=noninteractive
+
+RUN apt-get update && apt-get install --no-install-recommends -y \
+    ca-certificates tar wget
+
+# Download the release tarball
+RUN wget https://github.com/cryptpad/cryptpad/archive/refs/tags/2024.9.0.tar.gz -O cryptpad.tar.gz
+
+# Create folder for CryptPad
+RUN mkdir /cryptpad
+
+# Extract the release into /cryptpad
+RUN tar xvzf cryptpad.tar.gz -C /cryptpad --strip-components 1
+
+# Go to /cryptpad
+WORKDIR /cryptpad
+
+# Install dependencies
+RUN npm install --production && npm run install:components
+
+# Create the actual CryptPad image
+FROM node:lts-slim
+ENV DEBIAN_FRONTEND=noninteractive
+
+# Install curl for healthcheck
+# Install git, rdfind and unzip for install-onlyoffice.sh
+RUN apt-get update && apt-get install --no-install-recommends -y \
+    curl ca-certificates git rdfind unzip && \
+    apt-get clean && \
+    rm -rf /var/lib/apt/lists/*
+
+# Copy cryptpad with installed modules
+COPY --from=build /cryptpad /cryptpad
+
+# Set workdir to cryptpad
+WORKDIR /cryptpad
+
+# Install onlyoffice
+RUN ./install-onlyoffice.sh --accept-license --trust-repository
+
+# Build static pages (?) unsure we need this
+RUN npm run build
+
+# Healthcheck
+HEALTHCHECK --interval=1m CMD curl -f http://localhost:3000/ || exit 1
+
+# Ports
+EXPOSE 3000 3003
+
+# Run cryptpad on startup
+CMD ["npm", "start"]

cluster/prod/app/cryptpad/config/config-debug.js

@@ -0,0 +1,296 @@
+/* globals module */
+
+/*  DISCLAIMER:
+
+    There are two recommended methods of running a CryptPad instance:
+
+    1. Using a standalone nodejs server without HTTPS (suitable for local development)
+    2. Using NGINX to serve static assets and to handle HTTPS for API server's websocket traffic
+
+    We do not officially recommend or support Apache, Docker, Kubernetes, Traefik, or any other configuration.
+    Support requests for such setups should be directed to their authors.
+
+    If you're having difficulty difficulty configuring your instance
+    we suggest that you join the project's IRC/Matrix channel.
+
+    If you don't have any difficulty configuring your instance and you'd like to
+    support us for the work that went into making it pain-free we are quite happy
+    to accept donations via our opencollective page: https://opencollective.com/cryptpad
+
+*/
+module.exports = {
+/*  CryptPad is designed to serve its content over two domains.
+ *  Account passwords and cryptographic content is handled on the 'main' domain,
+ *  while the user interface is loaded on a 'sandbox' domain
+ *  which can only access information which the main domain willingly shares.
+ *
+ *  In the event of an XSS vulnerability in the UI (that's bad)
+ *  this system prevents attackers from gaining access to your account (that's good).
+ *
+ *  Most problems with new instances are related to this system blocking access
+ *  because of incorrectly configured sandboxes. If you only see a white screen
+ *  when you try to load CryptPad, this is probably the cause.
+ *
+ *  PLEASE READ THE FOLLOWING COMMENTS CAREFULLY.
+ *
+ */
+
+/*  httpUnsafeOrigin is the URL that clients will enter to load your instance.
+ *  Any other URL that somehow points to your instance is supposed to be blocked.
+ *  The default provided below assumes you are loading CryptPad from a server
+ *  which is running on the same machine, using port 3000.
+ *
+ *  In a production instance this should be available ONLY over HTTPS
+ *  using the default port for HTTPS (443) ie. https://cryptpad.fr
+ *  In such a case this should be also handled by NGINX, as documented in
+ *  cryptpad/docs/example.nginx.conf (see the $main_domain variable)
+ *
+ */
+    httpUnsafeOrigin: 'https://pad-debug.deuxfleurs.fr',
+
+/*  httpSafeOrigin is the URL that is used for the 'sandbox' described above.
+ *  If you're testing or developing with CryptPad on your local machine then
+ *  it is appropriate to leave this blank. The default behaviour is to serve
+ *  the main domain over port 3000 and to serve the sandbox content over port 3001.
+ *
+ *  This is not appropriate in a production environment where invasive networks
+ *  may filter traffic going over abnormal ports.
+ *  To correctly configure your production instance you must provide a URL
+ *  with a different domain (a subdomain is sufficient).
+ *  It will be used to load the UI in our 'sandbox' system.
+ *
+ *  This value corresponds to the $sandbox_domain variable
+ *  in the example nginx file.
+ *
+ *  Note that in order for the sandboxing system to be effective
+ *  httpSafeOrigin must be different from httpUnsafeOrigin.
+ *
+ *  CUSTOMIZE AND UNCOMMENT THIS FOR PRODUCTION INSTALLATIONS.
+ */
+    httpSafeOrigin: "https://pad-sandbox-debug.deuxfleurs.fr",
+
+/*  httpAddress specifies the address on which the nodejs server
+ *  should be accessible. By default it will listen on 127.0.0.1
+ *  (IPv4 localhost on most systems). If you want it to listen on
+ *  all addresses, including IPv6, set this to '::'.
+ *
+ */
+    httpAddress: '::',
+
+/*  httpPort specifies on which port the nodejs server should listen.
+ *  By default it will serve content over port 3000, which is suitable
+ *  for both local development and for use with the provided nginx example,
+ *  which will proxy websocket traffic to your node server.
+ *
+ */
+    httpPort: 3000,
+
+/*  httpSafePort allows you to specify an alternative port from which
+ *  the node process should serve sandboxed assets. The default value is
+ *  that of your httpPort + 1. You probably don't need to change this.
+ *
+ */
+    // httpSafePort: 3001,
+
+/*  CryptPad will launch a child process for every core available
+ *  in order to perform CPU-intensive tasks in parallel.
+ *  Some host environments may have a very large number of cores available
+ *  or you may want to limit how much computing power CryptPad can take.
+ *  If so, set 'maxWorkers' to a positive integer.
+ */
+    // maxWorkers: 4,
+
+    /* =====================
+     *         Admin
+     * ===================== */
+
+    /*
+     *  CryptPad contains an administration panel. Its access is restricted to specific
+     *  users using the following list.
+     *  To give access to the admin panel to a user account, just add their public signing
+     *  key, which can be found on the settings page for registered users.
+     *  Entries should be strings separated by a comma.
+     */
+    adminKeys: [
+      "[quentin@pad.deuxfleurs.fr/EWtzm-CiqJnM9RZL9mj-YyTgAtX-Zh76sru1K5bFpN8=]",
+      "[adrn@pad.deuxfleurs.fr/PxDpkPwd-jDJWkfWdAzFX7wtnLpnPlBeYZ4MmoEYS6E=]",
+      "[lx@pad.deuxfleurs.fr/FwQzcXywx1FIb83z6COB7c3sHnz8rNSDX1xhjPuH3Fg=]",
+      "[trinity-1686a@pad-debug.deuxfleurs.fr/Pu6Ef03jEsAGBbZI6IOdKd6+5pORD5N51QIYt4-Ys1c=]",
+      "[Jill@pad.deuxfleurs.fr/tLW7W8EVNB2KYETXEaOYR+HmNiBQtZj7u+SOxS3hGmg=]",
+      "[vincent@pad.deuxfleurs.fr/07FQiE8w1iztRWwzbRJzEy3xIqnNR31mUFjLNiGXjwU=]",
+      "[boris@pad.deuxfleurs.fr/kHo5LIhSxDFk39GuhGRp+XKlMjNe+lWfFWM75cINoTQ=]",
+      "[maximilien@pad.deuxfleurs.fr/UoXHLejYRUjvX6t55hAQKpjMdU-3ecg4eDhAeckZmyE=]",
+      "[armael@pad-debug.deuxfleurs.fr/CIKMvNdFxGavwTmni0TnR3x9GM0ypgx3DMcFyzppplU=]",
+      "[bjonglez@pad-debug.deuxfleurs.fr/+RRzwcLPj5ZCWELUXMjmt3u+-lvYnyhpDt4cqAn9nh8=]"
+    ],
+
+    /* =====================
+     *        STORAGE
+     * ===================== */
+
+    /*  Pads that are not 'pinned' by any registered user can be set to expire
+     *  after a configurable number of days of inactivity (default 90 days).
+     *  The value can be changed or set to false to remove expiration.
+     *  Expired pads can then be removed using a cron job calling the
+     *  `evict-inactive.js` script with node
+     *
+     *  defaults to 90 days if nothing is provided
+     */
+    //inactiveTime: 90, // days
+
+    /*  CryptPad archives some data instead of deleting it outright.
+     *  This archived data still takes up space and so you'll probably still want to
+     *  remove these files after a brief period.
+     *
+     *  cryptpad/scripts/evict-inactive.js is intended to be run daily
+     *  from a crontab or similar scheduling service.
+     *
+     *  The intent with this feature is to provide a safety net in case of accidental
+     *  deletion. Set this value to the number of days you'd like to retain
+     *  archived data before it's removed permanently.
+     *
+     *  defaults to 15 days if nothing is provided
+     */
+    //archiveRetentionTime: 15,
+
+    /*  It's possible to configure your instance to remove data
+     *  stored on behalf of inactive accounts. Set 'accountRetentionTime'
+     *  to the number of days an account can remain idle before its
+     *  documents and other account data is removed.
+     *
+     *  Leave this value commented out to preserve all data stored
+     *  by user accounts regardless of inactivity.
+     */
+     //accountRetentionTime: 365,
+
+    /*  Starting with CryptPad 3.23.0, the server automatically runs
+     *  the script responsible for removing inactive data according to
+     *  your configured definition of inactivity. Set this value to `true`
+     *  if you prefer not to remove inactive data, or if you prefer to
+     *  do so manually using `scripts/evict-inactive.js`.
+     */
+    //disableIntegratedEviction: true,
+
+
+    /*  Max Upload Size (bytes)
+     *  this sets the maximum size of any one file uploaded to the server.
+     *  anything larger than this size will be rejected
+     *  defaults to 20MB if no value is provided
+     */
+    //maxUploadSize: 20 * 1024 * 1024,
+
+    /*  Users with premium accounts (those with a plan included in their customLimit)
+     *  can benefit from an increased upload size limit. By default they are restricted to the same
+     *  upload size as any other registered user.
+     *
+     */
+    //premiumUploadSize: 100 * 1024 * 1024,
+
+    /* =====================
+     *   DATABASE VOLUMES
+     * ===================== */
+
+    /*
+     * We need this config entry, else CryptPad will try to mkdir
+     * some stuff into Nix store apparently...
+     */
+    base: '/mnt/data',
+
+    /*
+     *  CryptPad stores each document in an individual file on your hard drive.
+     *  Specify a directory where files should be stored.
+     *  It will be created automatically if it does not already exist.
+     */
+    filePath: '/mnt/datastore/',
+
+    /*  CryptPad offers the ability to archive data for a configurable period
+     *  before deleting it, allowing a means of recovering data in the event
+     *  that it was deleted accidentally.
+     *
+     *  To set the location of this archive directory to a custom value, change
+     *  the path below:
+     */
+    archivePath: '/mnt/data/archive',
+
+    /*  CryptPad allows logged in users to request that particular documents be
+     *  stored by the server indefinitely. This is called 'pinning'.
+     *  Pin requests are stored in a pin-store. The location of this store is
+     *  defined here.
+     */
+    pinPath: '/mnt/data/pins',
+
+    /*  if you would like the list of scheduled tasks to be stored in
+        a custom location, change the path below:
+    */
+    taskPath: '/mnt/data/tasks',
+
+    /*  if you would like users' authenticated blocks to be stored in
+        a custom location, change the path below:
+    */
+    blockPath: '/mnt/block',
+
+    /*  CryptPad allows logged in users to upload encrypted files. Files/blobs
+     *  are stored in a 'blob-store'. Set its location here.
+     */
+    blobPath: '/mnt/blob',
+
+    /*  CryptPad stores incomplete blobs in a 'staging' area until they are
+     *  fully uploaded. Set its location here.
+     */
+    blobStagingPath: '/mnt/data/blobstage',
+
+    decreePath: '/mnt/data/decrees',
+
+    /* CryptPad supports logging events directly to the disk in a 'logs' directory
+     * Set its location here, or set it to false (or nothing) if you'd rather not log
+     */
+    logPath: false,
+
+    /* =====================
+     *       Debugging
+     * ===================== */
+
+    /*  CryptPad can log activity to stdout
+     *  This may be useful for debugging
+     */
+    logToStdout: true,
+
+    /* CryptPad can be configured to log more or less
+     * the various settings are listed below by order of importance
+     *
+     * silly, verbose, debug, feedback, info, warn, error
+     *
+     * Choose the least important level of logging you wish to see.
+     * For example, a 'silly' logLevel will display everything,
+     * while 'info' will display 'info', 'warn', and 'error' logs
+     *
+     * This will affect both logging to the console and the disk.
+     */
+    logLevel: 'silly',
+
+    /*  clients can use the /settings/ app to opt out of usage feedback
+     *  which informs the server of things like how much each app is being
+     *  used, and whether certain clientside features are supported by
+     *  the client's browser. The intent is to provide feedback to the admin
+     *  such that the service can be improved. Enable this with `true`
+     *  and ignore feedback with `false` or by commenting the attribute
+     *
+     *  You will need to set your logLevel to include 'feedback'. Set this
+     *  to false if you'd like to exclude feedback from your logs.
+     */
+    logFeedback: false,
+
+    /*  CryptPad supports verbose logging
+     *  (false by default)
+     */
+    verbose: true,
+
+    /*  Surplus information:
+     *
+     *  'installMethod' is included in server telemetry to voluntarily
+     *  indicate how many instances are using unofficial installation methods
+     *  such as Docker.
+     *
+     */
+    installMethod: 'deuxfleurs.fr',
+};

cluster/prod/app/cryptpad/config/config.js

@@ -114,7 +114,14 @@ module.exports = {
     adminKeys: [
       "[quentin@pad.deuxfleurs.fr/EWtzm-CiqJnM9RZL9mj-YyTgAtX-Zh76sru1K5bFpN8=]",
       "[adrn@pad.deuxfleurs.fr/PxDpkPwd-jDJWkfWdAzFX7wtnLpnPlBeYZ4MmoEYS6E=]",
-      "[lx@pad.deuxfleurs.fr/FwQzcXywx1FIb83z6COB7c3sHnz8rNSDX1xhjPuH3Fg=]"
+      "[lx@pad.deuxfleurs.fr/FwQzcXywx1FIb83z6COB7c3sHnz8rNSDX1xhjPuH3Fg=]",
+      "[trinity-1686a@pad.deuxfleurs.fr/Pu6Ef03jEsAGBbZI6IOdKd6+5pORD5N51QIYt4-Ys1c=]",
+      "[Jill@pad.deuxfleurs.fr/tLW7W8EVNB2KYETXEaOYR+HmNiBQtZj7u+SOxS3hGmg=]",
+      "[vincent@pad.deuxfleurs.fr/07FQiE8w1iztRWwzbRJzEy3xIqnNR31mUFjLNiGXjwU=]",
+      "[boris@pad.deuxfleurs.fr/kHo5LIhSxDFk39GuhGRp+XKlMjNe+lWfFWM75cINoTQ=]",
+      "[maximilien@pad.deuxfleurs.fr/UoXHLejYRUjvX6t55hAQKpjMdU-3ecg4eDhAeckZmyE=]",
+      "[armael@pad.deuxfleurs.fr/CIKMvNdFxGavwTmni0TnR3x9GM0ypgx3DMcFyzppplU=]",
+      "[bjonglez@pad.deuxfleurs.fr/+RRzwcLPj5ZCWELUXMjmt3u+-lvYnyhpDt4cqAn9nh8=]"
     ],
 
     /* =====================
@@ -183,12 +190,18 @@ module.exports = {
      *   DATABASE VOLUMES
      * ===================== */
 
+    /*
+     * We need this config entry, else CryptPad will try to mkdir
+     * some stuff into Nix store apparently...
+     */
+    base: '/mnt/data',
+
     /*
      *  CryptPad stores each document in an individual file on your hard drive.
      *  Specify a directory where files should be stored.
      *  It will be created automatically if it does not already exist.
      */
-    filePath: './root/mnt/datastore/',
+    filePath: '/mnt/datastore/',
 
     /*  CryptPad offers the ability to archive data for a configurable period
      *  before deleting it, allowing a means of recovering data in the event
@@ -197,36 +210,36 @@ module.exports = {
      *  To set the location of this archive directory to a custom value, change
      *  the path below:
      */
-    archivePath: './root/mnt/data/archive',
+    archivePath: '/mnt/data/archive',
 
     /*  CryptPad allows logged in users to request that particular documents be
      *  stored by the server indefinitely. This is called 'pinning'.
      *  Pin requests are stored in a pin-store. The location of this store is
      *  defined here.
      */
-    pinPath: './root/mnt/data/pins',
+    pinPath: '/mnt/data/pins',
 
     /*  if you would like the list of scheduled tasks to be stored in
         a custom location, change the path below:
     */
-    taskPath: './root/mnt/data/tasks',
+    taskPath: '/mnt/data/tasks',
 
     /*  if you would like users' authenticated blocks to be stored in
         a custom location, change the path below:
     */
-    blockPath: './root/mnt/block',
+    blockPath: '/mnt/block',
 
     /*  CryptPad allows logged in users to upload encrypted files. Files/blobs
      *  are stored in a 'blob-store'. Set its location here.
      */
-    blobPath: './root/mnt/blob',
+    blobPath: '/mnt/blob',
 
     /*  CryptPad stores incomplete blobs in a 'staging' area until they are
      *  fully uploaded. Set its location here.
      */
-    blobStagingPath: './root/mnt/data/blobstage',
+    blobStagingPath: '/mnt/data/blobstage',
 
-    decreePath: './root/mnt/data/decrees',
+    decreePath: '/mnt/data/decrees',
 
     /* CryptPad supports logging events directly to the disk in a 'logs' directory
      * Set its location here, or set it to false (or nothing) if you'd rather not log

cluster/prod/app/cryptpad/deploy/cryptpad.hcl

@@ -1,5 +1,5 @@
 job "cryptpad" {
-  datacenters = ["neptune"]
+  datacenters = ["scorpio"]
   type = "service"
 
   group "cryptpad" {
@@ -22,20 +22,20 @@ job "cryptpad" {
       constraint {
         attribute = "${attr.unique.hostname}"
         operator = "="
-        value = "concombre"
+        value = "abricot"
       }
 
       config {
-        image = "superboum/cryptpad:0p3s44hjh4s1x55kbwkmywmwmx4wfyb8"
+        image = "kokakiwi/cryptpad:2024.9.0"
         ports = [ "http" ]
 
         volumes = [
           "/mnt/ssd/cryptpad:/mnt",
-          "secrets/config.js:/etc/cryptpad/config.js",
+          "secrets/config.js:/cryptpad/config.js",
         ]
       }
       env {
-        CRYPTPAD_CONFIG = "/etc/cryptpad/config.js"
+        CRYPTPAD_CONFIG = "/cryptpad/config.js"
       }
 
       template {
@@ -63,6 +63,10 @@ job "cryptpad" {
           "tricot pad-sandbox.deuxfleurs.fr",
           "tricot-add-header Cross-Origin-Resource-Policy cross-origin",
           "tricot-add-header Cross-Origin-Embedder-Policy require-corp",
+          "tricot-add-header Access-Control-Allow-Origin *",
+          "tricot-add-header Access-Control-Allow-Credentials true",
+          "d53-cname pad.deuxfleurs.fr",
+          "d53-cname pad-sandbox.deuxfleurs.fr",
         ]
         check {
           type = "http"

cluster/prod/app/email/config/dkim/signingtable

@@ -7,3 +7,5 @@
 *@e-x-t-r-a-c-t.me smtp._domainkey.deuxfleurs.fr
 *@courderec.re smtp._domainkey.deuxfleurs.fr
 *@trinity.fr.eu.org smtp._domainkey.deuxfleurs.fr
+*@scrutin.app smtp._domainkey.deuxfleurs.fr
+*@lalis.se smtp._domainkey.deuxfleurs.fr

cluster/prod/app/email/config/postfix/main.cf

@@ -83,11 +83,14 @@ smtpd_forbid_unauth_pipelining = yes
 smtpd_discard_ehlo_keywords = chunking
 smtpd_forbid_bare_newline = yes
 
-smtpd_client_connection_rate_limit = 2
-
 #===
 # Rate limiting
 #===
+smtpd_client_connection_rate_limit = 2
+# do not rate-limit ourselves
+# in particular, useful for forgejo who opens a lot of SMTP connections
+smtpd_client_event_limit_exceptions = $mynetworks /etc/postfix/rate-limit-exceptions
+
 slow_destination_recipient_limit = 20
 slow_destination_concurrency_limit = 2
 

cluster/prod/app/email/deploy/email-android7.hcl

@@ -1,5 +1,6 @@
 job "email-android7" {
-  datacenters = ["neptune"]
+  # Should not run on the same site as email.hcl (port conflict in diplonat)
+  datacenters = ["scorpio", "bespin"]
   type = "service"
   priority = 100
 
@@ -41,7 +42,7 @@ job "email-android7" {
 
       resources {
         cpu = 50
-        memory = 50
+        memory = 200
       }
 
       service {
@@ -95,7 +96,7 @@ job "email-android7" {
 
       resources {
         cpu = 50
-        memory = 50
+        memory = 200
       }
 
       service {

cluster/prod/app/email/deploy/email.hcl

@@ -1,4 +1,5 @@
 job "email" {
+  # Should not run on the same site as email-android7.hcl (port conflict in diplonat)
   datacenters = ["scorpio"]
   type = "service"
   priority = 65
@@ -381,6 +382,29 @@ job "email" {
         destination = "secrets/postfix/transport"
       }
 
+      template {
+        # Collect machine IPs from the cluster.
+        # We use intermediate maps to ensure we get a sorted list with no duplicates,
+        # so that it is robust wrt. changes in the order of the output of ls or
+        # addition of new machines in an existing site.
+        # (scratch.MapValues returns the list of *values* in the map, sorted by *key*)
+        data = <<EOH
+        {{- range ls "diplonat/autodiscovery/ipv4" }}
+          {{- with $a := .Value | parseJSON }}
+            {{- scratch.MapSet "ipv4" $a.address $a.address }}
+          {{- end }}
+        {{- end -}}
+        {{- range ls "diplonat/autodiscovery/ipv6" }}
+          {{- with $a := .Value | parseJSON }}
+            {{- scratch.MapSet "ipv6" $a.address $a.address }}
+          {{- end }}
+        {{- end -}}
+        {{- range scratch.MapValues "ipv4" }}{{ . }} {{ end }}
+        {{- range scratch.MapValues "ipv6" }}[{{ . }}] {{ end }}
+        EOH
+        destination = "secrets/postfix/rate-limit-exceptions"
+      }
+
       # --- secrets ---
       template {
         data = "{{ with $d := key \"tricot/certs/smtp.deuxfleurs.fr\" | parseJSON }}{{ $d.cert_pem }}{{ end }}"

cluster/prod/app/garage/deploy/garage.hcl

@@ -1,5 +1,5 @@
 job "garage" {
-  datacenters = [ "neptune", "bespin", "scorpio" ]
+  datacenters = ["neptune", "bespin", "scorpio", "corrin"]
   type = "system"
   priority = 80
 
@@ -26,7 +26,7 @@ job "garage" {
     task "server" {
       driver = "docker"
       config {
-        image = "dxflrs/garage:v1.0.0-rc1"
+        image = "superboum/garage:v1.0.0-rc1-hotfix-red-ftr-wquorum"
         command = "/garage"
         args = [ "server" ]
         network_mode = "host"
@@ -80,9 +80,9 @@ job "garage" {
       #### Configuration for service ports: admin port (internal use only)
 
       service {
+        name = "garage-admin"
         port = "admin"
         address_mode = "host"
-        name = "garage-admin"
         # Check that Garage is alive and answering TCP connections
         check {
           type = "tcp"
@@ -96,18 +96,19 @@ job "garage" {
         }
       }
 
-      #### Configuration for service ports: externally available ports (API, web)
+      #### Configuration for service ports: externally available ports (S3 API, K2V, web)
 
       service {
+        name = "garage-api"
         tags = [
           "garage_api",
           "tricot garage.deuxfleurs.fr",
           "tricot *.garage.deuxfleurs.fr",
+          "tricot-on-demand-tls-ask http://garage-admin.service.prod.consul:3903/check",
           "tricot-site-lb",
         ]
         port = "s3"
         address_mode = "host"
-        name = "garage-api"
         # Check 1: Garage is alive and answering TCP connections
         check {
           name = "garage-api-live"
@@ -132,6 +133,39 @@ job "garage" {
       }
 
       service {
+        name = "garage-k2v"
+        tags = [
+          "garage_k2v",
+          "tricot k2v.deuxfleurs.fr",
+          "tricot-site-lb",
+        ]
+        port = "k2v"
+        address_mode = "host"
+        # Check 1: Garage is alive and answering TCP connections
+        check {
+          name = "garage-k2v-live"
+          type = "tcp"
+          interval = "60s"
+          timeout = "5s"
+          check_restart {
+            limit = 3
+            grace = "90s"
+            ignore_warnings = false
+          }
+        }
+        # Check 2: Garage is in a healthy state and requests should be routed here
+        check {
+          name = "garage-k2v-healthy"
+          port = "admin"
+          type = "http"
+          path = "/health"
+          interval = "60s"
+          timeout = "5s"
+        }
+      }
+
+      service {
+        name = "garage-web"
         tags = [
             "garage-web",
             "tricot * 1",
@@ -144,7 +178,6 @@ job "garage" {
         ]
         port = "web"
         address_mode = "host"
-        name = "garage-web"
         # Check 1: Garage is alive and answering TCP connections
         check {
           name = "garage-web-live"
@@ -183,39 +216,6 @@ job "garage" {
         port = "web"
         on_update = "ignore"
       }
-          
-
-      service {
-        tags = [
-          "garage_k2v",
-          "tricot k2v.deuxfleurs.fr",
-          "tricot-site-lb",
-        ]
-        port = "k2v"
-        address_mode = "host"
-        name = "garage-k2v"
-        # Check 1: Garage is alive and answering TCP connections
-        check {
-          name = "garage-k2v-live"
-          type = "tcp"
-          interval = "60s"
-          timeout = "5s"
-          check_restart {
-            limit = 3
-            grace = "90s"
-            ignore_warnings = false
-          }
-        }
-        # Check 2: Garage is in a healthy state and requests should be routed here
-        check {
-          name = "garage-k2v-healthy"
-          port = "admin"
-          type = "http"
-          path = "/health"
-          interval = "60s"
-          timeout = "5s"
-        }
-      }
     }
   }
 }

cluster/prod/app/guichet/deploy/guichet.hcl

@@ -0,0 +1,62 @@
+job "guichet" {
+  datacenters = ["corrin", "neptune", "scorpio"]
+  type = "service"
+  priority = 90
+
+  group "guichet" {
+    count = 1
+
+    network {
+      port "web_port" { to = 9991 }
+    }
+
+    task "guichet" {
+      driver = "docker"
+      config {
+        image = "dxflrs/guichet:0x4y7bj1qb8w8hckvpbzlgyxh63j66ij"
+        args = [ "server", "-config", "/etc/config.json" ]
+        readonly_rootfs = true
+        ports = [ "web_port" ]
+        volumes = [
+          "secrets/config.json:/etc/config.json"
+        ]
+      }
+
+      template {
+        data = file("../config/guichet/config.json.tpl")
+        destination = "secrets/config.json"
+      }
+
+      resources {
+        # limite de mémoire un peu élevée par précaution.
+        # avec 200M, j'ai observé guichet se faire OOM-killed au moment
+        # où un nouvel utilisateur clique sur un lien d'invitation
+        # fraichement généré.
+        memory = 300
+      }
+
+      service {
+        name = "guichet"
+        tags = [
+          "guichet",
+          "tricot guichet.deuxfleurs.fr",
+          "d53-cname guichet.deuxfleurs.fr",
+        ]
+        port = "web_port"
+        address_mode = "host"
+        check {
+          type = "tcp"
+          port = "web_port"
+          interval = "60s"
+          timeout = "5s"
+          check_restart {
+            limit = 3
+            grace = "90s"
+            ignore_warnings = false
+          }
+        }
+      }
+    }
+  }
+}
+

cluster/prod/app/jitsi/build/docker-compose.yml

@@ -6,16 +6,17 @@ services:
       context: ./jitsi-meet
       args:
         # https://github.com/jitsi/jitsi-meet
-        MEET_TAG: stable/jitsi-meet_8252
+        MEET_TAG: stable/jitsi-meet_9646
-    image: superboum/amd64_jitsi_meet:v6
+        NODE_MAJOR_VERSION: 22
+    image: superboum/amd64_jitsi_meet:v7
 
   jitsi-conference-focus:
     build:
       context: ./jitsi-conference-focus
       args:
         # https://github.com/jitsi/jicofo
-        JICOFO_TAG: stable/jitsi-meet_8252
+        JICOFO_TAG: stable/jitsi-meet_9646
-    image: superboum/amd64_jitsi_conference_focus:v10
+    image: superboum/amd64_jitsi_conference_focus:v11
 
   jitsi-videobridge:
     build:
@@ -23,13 +24,13 @@ services:
       args:
         # https://github.com/jitsi/jitsi-videobridge
         # note: JVB is not tagged with non-stable tags
-        JVB_TAG: stable/jitsi-meet_8252
+        JVB_TAG: stable/jitsi-meet_9646
-    image: superboum/amd64_jitsi_videobridge:v21
+    image: superboum/amd64_jitsi_videobridge:v22
 
   jitsi-xmpp:
     build:
       context: ./jitsi-xmpp
       args:
-        MEET_TAG: stable/jitsi-meet_8252
+        MEET_TAG: stable/jitsi-meet_9646
-        PROSODY_VERSION: 1nightly191-1~bookworm
+        PROSODY_VERSION: 0.12.3-1
-    image: superboum/amd64_jitsi_xmpp:v11
+    image: superboum/amd64_jitsi_xmpp:v12

cluster/prod/app/jitsi/build/jitsi-meet/Dockerfile

@@ -1,8 +1,9 @@
 FROM debian:bookworm AS builder
 
+ARG NODE_MAJOR_VERSION
 RUN apt-get update && \
     apt-get install -y curl && \
-    curl -sL https://deb.nodesource.com/setup_19.x | bash - && \
+    curl -sL https://deb.nodesource.com/setup_${NODE_MAJOR_VERSION}.x | bash - && \
     apt-get install -y git nodejs make git unzip
 
 ARG MEET_TAG

cluster/prod/app/jitsi/build/jitsi-videobridge/jvb_run

@@ -6,7 +6,7 @@ if [ -z "${JITSI_NAT_LOCAL_IP}" ]; then
 fi
 
 if [ -z "${JITSI_NAT_PUBLIC_IP}" ]; then
-  JITSI_NAT_PUBLIC_IP=$(curl https://ifconfig.me)
+  JITSI_NAT_PUBLIC_IP=$(curl -4 https://ifconfig.me)
 fi
 
 echo "NAT config: ${JITSI_NAT_LOCAL_IP} -> ${JITSI_NAT_PUBLIC_IP}"

cluster/prod/app/jitsi/build/jitsi-xmpp/Dockerfile

@@ -13,8 +13,8 @@ RUN apt-get update && \
     apt-get install -y wget gnupg2 extrepo && \
     extrepo enable prosody && \
     apt-get update && \
-    apt-cache show prosody-0.12 && \
+    apt-cache show prosody && \
-    apt-get install -y prosody-0.12=${PROSODY_VERSION} lua-event
+    apt-get install -y prosody=${PROSODY_VERSION} lua-event
 
 RUN mkdir -p /usr/local/share/ca-certificates/ && \
     ln -sf \

cluster/prod/app/jitsi/config/nginx.conf

@@ -81,6 +81,12 @@ http {
       alias /srv/jitsi-meet/$1/$2;
     }
 
+    # Disallow robots indexation 
+    location = /robots.txt {
+      add_header  Content-Type  text/plain;
+      return 200 "User-agent: *\nDisallow: /\n";
+    }
+
     # not used yet VVV
     # colibri (JVB) websockets
     #location ~ ^/colibri-ws/([a-zA-Z0-9-\.]+)/(.*) {
@@ -92,12 +98,12 @@ http {
     #}
 
 
-    location ~ "2daut2wank2|2duat2wank|2duat2wank0|2duat2wank1|2duat2wank2|2duat2wank3|2duatr2wank|2duatr2wank0|2duatr2wank1|2duatr2wank2|2wank2daut2|daut1|duat2wank|duat2wank2|duatr2wank2|prettypanties|slutgfs|wabk2daugther|wank2daugther|wank2daut|wank2daut2|wank2daut3|wankwatch" {
+    location ~* {{ key "secrets/jitsi/blacklist_regex" }} {
       return 302 https://www.service-public.fr/particuliers/vosdroits/R17674; 
     }
 
     location = /http-bind {
-	if ($args ~ "2daut2wank2|2duat2wank|2duat2wank0|2duat2wank1|2duat2wank2|2duat2wank3|2duatr2wank|2duatr2wank0|2duatr2wank1|2duatr2wank2|2wank2daut2|daut1|duat2wank|duat2wank2|duatr2wank2|prettypanties|slutgfs|wabk2daugther|wank2daugther|wank2daut|wank2daut2|wank2daut3|wankwatch") {
+	if ($args ~* {{ key "secrets/jitsi/blacklist_regex" }}) {
 	    return 403 'forbidden';
 	}
 

cluster/prod/app/jitsi/config/videobridge.conf

@@ -115,7 +115,8 @@ videobridge {
     # (e.g. health or debug stats)
     private {
       # See JettyBundleActivatorConfig in Jicoco for values
-      host = 127.0.0.1
+      host = 0.0.0.0
+      port = {{ env "NOMAD_PORT_management_port" }}
     }
   }
   octo {

cluster/prod/app/jitsi/deploy/jitsi.hcl

@@ -1,5 +1,5 @@
 job "jitsi" {
-  datacenters = ["neptune", "scorpio"]
+  datacenters = ["neptune", "scorpio", "corrin"]
   type = "service"
 
   priority = 50
@@ -20,7 +20,7 @@ job "jitsi" {
     task "xmpp" {
       driver = "docker"
       config {
-        image = "superboum/amd64_jitsi_xmpp:v11"
+        image = "superboum/amd64_jitsi_xmpp:v12"
         ports = [ "bosh_port", "xmpp_port" ]
         network_mode = "host"
         volumes = [
@@ -101,7 +101,7 @@ EOF
     task "front" {
       driver = "docker"
       config {
-        image = "superboum/amd64_jitsi_meet:v6"
+        image = "superboum/amd64_jitsi_meet:v7"
         network_mode = "host"
         ports = [ "https_port" ]
         volumes = [
@@ -168,7 +168,7 @@ EOF
     task "jicofo" {
       driver = "docker"
       config {
-        image = "superboum/amd64_jitsi_conference_focus:v10"
+        image = "superboum/amd64_jitsi_conference_focus:v11"
         network_mode = "host"
         volumes = [
           "secrets/certs/jitsi.crt:/usr/local/share/ca-certificates/jitsi.crt",
@@ -203,14 +203,15 @@ EOF
   group "data_plane" {
     network {
       port "video_port" { static = 8080 }
+      port "management_port" { static = 8000 }
     }
 
     task "videobridge" {
       driver = "docker"
       config {
-        image = "superboum/amd64_jitsi_videobridge:v21"
+        image = "superboum/amd64_jitsi_videobridge:v22"
         network_mode = "host"
-        ports = [ "video_port" ] 
+        ports = [ "video_port", "management_port" ] 
         ulimit {
           nofile = "1048576:1048576"
           nproc = "65536:65536"
@@ -222,11 +223,14 @@ EOF
         ]
       }
 
-      env {
+      template {
-        # Our container can autodetect the public IP with the ifconfig.me service
+         data = <<EOH
-        # However we would like to avoid relying on a 3rd party service for production use
+	 {{ with $a := env "attr.unique.hostname" | printf "diplonat/autodiscovery/ipv4/%s" | key | parseJSON }}
-        # That's why I am setting the public IP address statically here VVVV
+         JITSI_NAT_PUBLIC_IP = {{ $a.address }}
-        JITSI_NAT_PUBLIC_IP = "${meta.public_ipv4}"
+	 {{ end }}
+	 EOH
+	 destination = "secrets/jitsi-videobridge.env"
+	 env         = true
       }
 
       template {
@@ -256,9 +260,16 @@ EOF
         port = "video_port"
         address_mode = "host"
         name = "video-jitsi"
+      }
+
+      service {
+        tags = [ "jitsi" ]
+        port = "management_port"
+        address_mode = "host"
+        name = "management-video-jitsi"
         check {
           type = "tcp"
-          port = "video_port"
+          port = "management_port"
           interval = "60s"
           timeout = "5s"
         }

cluster/prod/app/jitsi/integration/README.md

@@ -52,7 +52,7 @@ But maybe this value is deprecated: the check is still here but it is not used a
 start a maintainance container
 
 ```
-docker run --rm -it -v `pwd`/prosody/certs/:/var/lib/prosody/ -v `pwd`/prosody/prosody.cfg.lua:/etc/prosody/prosody.cfg.lua:ro --user root superboum/amd64_jitsi_xmpp:v11 bash
+docker run --rm -it -v `pwd`/prosody/certs/:/var/lib/prosody/ -v `pwd`/prosody/prosody.cfg.lua:/etc/prosody/prosody.cfg.lua:ro --user root superboum/amd64_jitsi_xmpp:v12 bash
 ```
 
 then generate certificates from inside this container

cluster/prod/app/jitsi/integration/docker-compose.yml

@@ -1,7 +1,7 @@
 version: '3.4'
 services:
   jitsi-xmpp:
-    image: superboum/amd64_jitsi_xmpp:v11
+    image: superboum/amd64_jitsi_xmpp:v12
     volumes:
       - "./prosody/prosody.cfg.lua:/etc/prosody/prosody.cfg.lua:ro"
       - "./prosody/certs/jitsi.crt:/var/lib/prosody/jitsi.crt:ro"
@@ -11,16 +11,19 @@ services:
     environment:
       - JICOFO_AUTH_PASSWORD=jicofopass
       - JVB_AUTH_PASSWORD=jvbpass
+    ports:
+      - "5222:5222/tcp"
  
   jitsi-conference-focus:
-    image: superboum/amd64_jitsi_conference_focus:v10
+    image: superboum/amd64_jitsi_conference_focus:v11
     volumes:
       - "./prosody/certs/jitsi.crt:/usr/local/share/ca-certificates/jitsi.crt:ro"
       - "./prosody/certs/auth.jitsi.crt:/usr/local/share/ca-certificates/auth.jitsi.crt:ro"
       - "./jicofo/jicofo.conf:/etc/jitsi/jicofo.conf:ro"
 
   jitsi-videobridge:
-    image: superboum/amd64_jitsi_videobridge:v21
+    image: superboum/amd64_jitsi_videobridge:v22
+    network_mode: "host"
     volumes:
       - "./prosody/certs/jitsi.crt:/usr/local/share/ca-certificates/jitsi.crt:ro"
       - "./prosody/certs/auth.jitsi.crt:/usr/local/share/ca-certificates/auth.jitsi.crt:ro"
@@ -31,7 +34,7 @@ services:
       - "10000:10000/udp"
 
   jitsi-meet:
-    image: superboum/amd64_jitsi_meet:v6
+    image: superboum/amd64_jitsi_meet:v7
     volumes:
       - "./prosody/certs/jitsi.crt:/etc/nginx/jitsi.crt:ro"
       - "./prosody/certs/jitsi.key:/etc/nginx/jitsi.key:ro"

cluster/prod/app/jitsi/integration/jvb/videobridge.conf

@@ -62,7 +62,7 @@ videobridge {
 
       configs {
         unique-xmpp-server {
-          hostname="jitsi-xmpp"
+          hostname="172.17.0.1"
           domain = "auth.jitsi"
           username = "jvb"
           password = "jvbpass"

cluster/prod/app/jitsi/integration/meet/config.js

@@ -22,7 +22,7 @@ var config = {
     },
 
     // BOSH URL. FIXME: use XEP-0156 to discover it.
-    bosh: '//192.168.1.143/http-bind',
+    bosh: '//[2a0c:e303:0:2a00::de6]/http-bind',
 
     // Websocket URL
     // websocket: 'wss://jitsi-meet.example.com/xmpp-websocket',

cluster/prod/app/matrix/README.md

@@ -0,0 +1,14 @@
+# Informations relatives à la config Matrix
+
+## Ressources
+
+- La doc de Synapse est là : https://element-hq.github.io/synapse/latest/welcome_and_overview.html
+
+### Métriques 
+
+- La page pour configurer les metrics : https://element-hq.github.io/synapse/latest/usage/configuration/config_documentation.html?highlight=metrics#metrics
+- La page pour le tutoriel sur configurer les metrics avec Prometheus : https://element-hq.github.io/synapse/latest/metrics-howto.html?highlight=metrics#how-to-monitor-synapse-metrics-using-prometheus
+
+---
+
+> Avec Nix on n'aurait pas tous ces problèmes.

cluster/prod/app/matrix/build/docker-compose.yml

@@ -6,18 +6,18 @@ services:
       context: ./riotweb
       args:
         # https://github.com/vector-im/element-web/releases
-        VERSION: 1.11.49
+        VERSION: v1.11.78
-    image: lxpz/amd64_elementweb:v35
+    image: particallydone/amd64_elementweb:v36
 
   synapse:
     build:
       context: ./matrix-synapse
       args:
         # https://github.com/matrix-org/synapse/releases
-        VERSION: 1.95.1
+        VERSION: v1.104.0
         # https://github.com/matrix-org/synapse-s3-storage-provider/commits/main
         # Update with the latest commit on main each time you update the synapse version
         # otherwise synapse may fail to launch due to incompatibility issues
         # see this issue for an example: https://github.com/matrix-org/synapse-s3-storage-provider/issues/64
-        S3_VERSION: v1.2.1
+        S3_VERSION: 2c46a764f700e6439afa11c00db827ddf21a9e89
-    image: lxpz/amd64_synapse:v58
+    image: particallydone/amd64_synapse:v60

cluster/prod/app/matrix/build/matrix-synapse/Dockerfile

@@ -1,4 +1,4 @@
-FROM amd64/debian:bookworm as builder
+FROM amd64/debian:trixie AS builder
 
 ARG VERSION
 ARG S3_VERSION
@@ -22,21 +22,25 @@ RUN apt-get update && \
       libpq-dev \
       virtualenv \
       libxslt1-dev \
-      git && \
+      git
-    virtualenv /root/matrix-env -p /usr/bin/python3 && \
+
+RUN virtualenv /root/matrix-env -p /usr/bin/python3 && \
     . /root/matrix-env/bin/activate && \
     pip3 install \
-      https://github.com/matrix-org/synapse/archive/v${VERSION}.tar.gz#egg=matrix-synapse[matrix-synapse-ldap3,postgres,resources.consent,saml2,url_preview] && \
+      https://github.com/element-hq/synapse/archive/${VERSION}.tar.gz#egg=matrix-synapse[matrix-synapse-ldap3,postgres,resources.consent,saml2,url_preview] && \
     pip3 install \
       git+https://github.com/matrix-org/synapse-s3-storage-provider.git@${S3_VERSION}
 
-FROM amd64/debian:bookworm
+# WARNING: trixie n'est pas une LTS
+# mais on est obligé d'avoir la même version que le builder
+# et le builder veut une version de rustc qui n'est pas dans bookworm (dernière LTS at the time of writing)
+FROM amd64/debian:trixie
 
 RUN apt-get update && \
     apt-get -qq -y full-upgrade && \
     apt-get install -y \
       python3 \
-      python3-distutils \
+      python3-setuptools \
       libffi8 \
       libjpeg62-turbo \
       libssl3 \

cluster/prod/app/matrix/build/riotweb/Dockerfile

@@ -1,13 +1,16 @@
-FROM amd64/debian:buster as builder
+FROM amd64/debian:trixie as builder
 
 ARG VERSION
 WORKDIR /root
 
 RUN apt-get update && \
-    apt-get install -y wget && \
+    apt-get install -y wget
-    wget https://github.com/vector-im/element-web/releases/download/v${VERSION}/element-v${VERSION}.tar.gz && \
-    tar xf element-v${VERSION}.tar.gz && \
-    mv element-v${VERSION}/ riot/
 
+RUN wget https://github.com/element-hq/element-web/releases/download/${VERSION}/element-${VERSION}.tar.gz && \
+    tar xf element-${VERSION}.tar.gz && \
+    mv element-${VERSION}/ riot/
+
+# Le conteneur de superboum contient uniquement un serveur web de 5 lignes.
+# Ca vous ennuie ? On peut publier Riot dans un bucket web Garage, tkt, ça sera Tricot qui servira.
 FROM superboum/amd64_webserver:v3
 COPY --from=builder /root/riot /srv/http

cluster/prod/app/matrix/deploy/im.hcl

@@ -15,7 +15,7 @@ job "matrix" {
       driver = "docker"
 
       config {
-        image = "lxpz/amd64_synapse:v58"
+        image = "particallydone/amd64_synapse:v60"
         network_mode = "host"
         readonly_rootfs = true
         ports = [ "api_port" ]
@@ -101,7 +101,7 @@ job "matrix" {
       driver = "docker"
 
       config {
-        image = "lxpz/amd64_synapse:v58"
+        image = "particallydone/amd64_synapse:v60"
         readonly_rootfs = true
         command = "/usr/local/bin/matrix-s3-async"
         work_dir = "/tmp"
@@ -137,7 +137,7 @@ EOH
     task "riotweb" {
       driver = "docker"
       config {
-        image = "lxpz/amd64_elementweb:v35"
+        image = "particallydone/amd64_elementweb:v36"
         ports = [ "web_port" ]
         volumes = [
           "secrets/config.json:/srv/http/config.json"
@@ -190,7 +190,7 @@ EOH
       driver = "docker"
 
       config {
-        image = "ghcr.io/matrix-org/sliding-sync:v0.99.12"
+        image = "ghcr.io/matrix-org/sliding-sync:v0.99.16"
         ports = [ "syncv3_api", "syncv3_metrics" ]
       }
 

cluster/prod/app/plume/deploy/plume.hcl

@@ -1,5 +1,5 @@
 job "plume-blog" {
-  datacenters = ["scorpio", "neptune"]
+  datacenters = ["corrin", "neptune", "scorpio"]
   type = "service"
 
   group "plume" {

cluster/prod/app/postgres/deploy/postgres.hcl

@@ -1,5 +1,5 @@
 job "postgres14" {
-  datacenters = ["neptune", "bespin", "scorpio"]
+  datacenters = ["neptune", "bespin", "scorpio", "corrin"]
   type = "system"
   priority = 90
 
@@ -19,8 +19,7 @@ job "postgres14" {
     constraint {
       attribute = "${attr.unique.hostname}"
       operator = "set_contains_any"
-      value = "courgette,df-ymf,abricot"
+      value = "courgette,df-ymf,abricot,pasteque"
-	  # old (orion) = diplotaxis
     }
 
     restart {

cluster/prod/app/telemetry/config/prometheus.yml

@@ -26,6 +26,16 @@ scrape_configs:
         cert_file: /etc/prometheus/consul-client.crt
         key_file: /etc/prometheus/consul-client.key
 
+  - job_name: 'jitsi-videobridge'
+    consul_sd_configs:
+    - server: 'https://localhost:8501'
+      services:
+        - 'management-video-jitsi'
+      tls_config:
+        ca_file: /etc/prometheus/consul-ca.crt
+        cert_file: /etc/prometheus/consul-client.crt
+        key_file: /etc/prometheus/consul-client.key
+
   - job_name: 'garage'
     authorization:
       type: Bearer

cluster/prod/app/telemetry/deploy/telemetry-service.hcl

@@ -1,5 +1,5 @@
 job "telemetry-service" {
-  datacenters = ["neptune", "scorpio"]
+  datacenters = ["corrin", "scorpio"]
   type = "service"
 
   group "grafana" {

cluster/prod/app/telemetry/deploy/telemetry-storage.hcl

@@ -1,5 +1,5 @@
 job "telemetry-storage" {
-  datacenters = ["neptune", "bespin"]
+  datacenters = ["scorpio", "bespin"]
   type = "service"
 
   group "prometheus" {
@@ -14,13 +14,13 @@ job "telemetry-storage" {
     constraint {
       attribute = "${attr.unique.hostname}"
       operator = "set_contains_any"
-      value = "celeri,df-ymk"
+      value = "ananas,df-ymk"
     }
 
     task "prometheus" {
       driver = "docker"
       config {
-        image = "prom/prometheus:v2.46.0"
+        image = "prom/prometheus:v2.50.1"
         network_mode = "host"
         ports = [ "prometheus" ]
         args = [

cluster/prod/app/telemetry/deploy/telemetry-system.hcl

@@ -1,5 +1,5 @@
 job "telemetry-system" {
-	datacenters = ["neptune", "scorpio", "bespin"]
+	datacenters = ["neptune", "scorpio", "bespin", "corrin"]
 	type = "system"
 	priority = "100"
 
@@ -12,7 +12,7 @@ job "telemetry-system" {
 			driver = "docker"
 
 			config {
-				image = "quay.io/prometheus/node-exporter:v1.6.1"
+				image = "quay.io/prometheus/node-exporter:v1.7.0"
 				network_mode = "host"
 				volumes = [
 					"/:/host:ro,rslave"

cluster/prod/app/woodpecker-ci/deploy/server.hcl

@@ -1,7 +1,5 @@
 job "woodpecker-ci" {
-  # prefer scorpio as neptune has bad ipv6 routes to git.deuxfleurs.fr
+  datacenters = ["neptune", "scorpio"]
-  # and bad networking makes woodpecker fail to run builds
-  datacenters = [/*"neptune",*/ "scorpio"]
   type = "service"
 
   group "server" {
@@ -25,7 +23,7 @@ job "woodpecker-ci" {
     task "server" {
       driver = "docker"
       config {
-        image = "woodpeckerci/woodpecker-server:v2.3.0"
+        image = "woodpeckerci/woodpecker-server:v2.7.1"
         ports = [ "web_port", "grpc_port" ]
         network_mode = "host"
       }
@@ -33,7 +31,7 @@ job "woodpecker-ci" {
       template {
         data = <<EOH
 WOODPECKER_OPEN=true
-WOODPECKER_ORGS=Deuxfleurs
+WOODPECKER_ORGS=Deuxfleurs,distorsion
 WOODPECKER_ADMIN=lx
 
 WOODPECKER_HOST=https://woodpecker.deuxfleurs.fr
@@ -123,6 +121,7 @@ http {
     listen [::]:14453 ssl;
     http2 on;
     server_name woodpecker.deuxfleurs.fr;
+    resolver 127.0.0.1 valid=30s;
 
     ssl_certificate "/etc/ssl/certs/woodpecker.cert";
     ssl_certificate_key "/etc/ssl/certs/woodpecker.key";

cluster/prod/app/woodpecker-ci/integration/README.md

@@ -38,8 +38,8 @@ apt-get install docker-ce docker-ce-cli containerd.io docker-buildx-plugin docke
 ## Install the runner
 
 ```bash
-wget https://git.deuxfleurs.fr/Deuxfleurs/infrastructure/raw/branch/main/app/woodpecker-ci/integration/nix.conf
+wget https://git.deuxfleurs.fr/Deuxfleurs/nixcfg/raw/branch/main/cluster/prod/app/woodpecker-ci/integration/nix.conf
-wget https://git.deuxfleurs.fr/Deuxfleurs/infrastructure/raw/branch/main/app/woodpecker-ci/integration/docker-compose.yml
+wget https://git.deuxfleurs.fr/Deuxfleurs/nixcfg/raw/branch/main/cluster/prod/app/woodpecker-ci/integration/docker-compose.yml
 ```
 
 Create a new Agent for your runner in the Woodpecker admin, and copy the agent secret value.

cluster/prod/app/woodpecker-ci/integration/docker-compose.yml

@@ -10,7 +10,7 @@ services:
       - "./nix.conf:/etc/nix/nix.conf:ro"
 
   woodpecker-runner:
-    image: woodpeckerci/woodpecker-agent:v2.3.0
+    image: woodpeckerci/woodpecker-agent:v2.4.1
     restart: always
     environment:
       # -- change these for each agent

cluster/prod/cluster.nix

@@ -11,55 +11,37 @@
       siteName = "neptune";
       publicKey = "VvXT0fPDfWsHxumZqVShpS33dJQAdpJ1E79ZbCBJP34=";
       address = "10.83.1.1";
-      endpoint = "77.207.15.215:33731";
+      endpoint = "82.67.87.112:33731";
     };
     "courgette" = {
       siteName = "neptune";
       publicKey = "goTkBJGmzrGDOAjUcdH9G0JekipqSMoaYQdB6IHnzi0=";
       address = "10.83.1.2";
-      endpoint = "77.207.15.215:33732";
+      endpoint = "82.67.87.112:33732";
     };
     "celeri" = {
       siteName = "neptune";
       publicKey = "oZDAb8LoLW87ktUHyFFec0VaIar97bqq47mGbdVqJ0U=";
       address = "10.83.1.3";
-      endpoint = "77.207.15.215:33733";
+      endpoint = "82.67.87.112:33733";
-    };
-    "dahlia" = {
-      siteName = "orion";
-      publicKey = "EtRoWBYCdjqgXX0L+uWLg8KxNfIK8k9OTh30tL19bXU=";
-      address = "10.83.2.1";
-      endpoint = "82.66.80.201:33731";
-    };
-    "diplotaxis" = {
-      siteName = "orion";
-      publicKey = "HbLC938mysadMSOxWgq8+qrv+dBKzPP/43OMJp/3phA=";
-      address = "10.83.2.2";
-      endpoint = "82.66.80.201:33732";
-    };
-    "doradille" = {
-      siteName = "orion";
-      publicKey = "e1C8jgTj9eD20ywG08G1FQZ+Js3wMK/msDUE1wO3l1Y=";
-      address = "10.83.2.3";
-      endpoint = "82.66.80.201:33733";
     };
     "df-ykl" = {
       siteName = "bespin";
       publicKey = "bIjxey/VhBgVrLa0FxN/KISOt2XFmQeSh1MPivUq9gg=";
       address = "10.83.3.1";
-      endpoint = "109.136.55.235:33731";
+      endpoint = "109.130.116.21:33731";
     };
     "df-ymf" = {
       siteName = "bespin";
       publicKey = "pUIKv8UBl586O7DBrHBsb9BgNU7WlYQ2r2RSNkD+JAQ=";
       address = "10.83.3.2";
-      endpoint = "109.136.55.235:33732";
+      endpoint = "109.130.116.21:33732";
     };
     "df-ymk" = {
       siteName = "bespin";
       publicKey = "VBmpo15iIJP7250NAsF+ryhZc3j+8TZFnE1Djvn5TXI=";
       address = "10.83.3.3";
-      endpoint = "109.136.55.235:33733";
+      endpoint = "109.130.116.21:33733";
     };
     "abricot" = {
       siteName = "scorpio";
@@ -73,20 +55,58 @@
       address = "10.83.4.2";
       endpoint = "82.65.41.110:33742";
     };
+    "onion" = {
+      siteName = "dathomir";
+      publicKey = "gpeqalqAUaYlMuebv3glQeZyE64+OpkyIHFhfStJQA4=";
+      address = "10.83.5.1";
+      endpoint = "82.64.238.84:33740";
     };
+    "oseille" = {
+      siteName = "dathomir";
+      publicKey = "T87GzAQt02i00iOMbEm7McA/VL9OBrG/kCrgoNh5MmY=";
+      address = "10.83.5.2";
+      endpoint = "82.64.238.84:33741";
+    };
+    "io" = {
+      siteName = "dathomir";
+      publicKey = "3+VvWJtABOAd6zUCMROhqGbNtkQRtoIkVmYn0M81jQw=";
+      address = "10.83.5.3";
+      endpoint = "82.64.238.84:33742";
+    };
+    "ortie" = {
+      siteName = "dathomir";
+      publicKey = "tbx2mvt3TN3Xd+ermwwZ6it80VWT5949cKH9BRFgvzE=";
+      address = "10.83.5.4";
+      endpoint = "82.64.238.84:33743";
+    };
+    "pamplemousse" = {
+      siteName = "corrin";
+      publicKey = "6y5GrNXEql12AObuSfOHGxxUKpdlcyapu+juLYOEBhc=";
+      address = "10.83.6.1";
+      endpoint = "45.81.62.36:33731";
+    };
+    "pasteque" = {
+      siteName = "corrin";
+      publicKey = "7vPq0z6JVxTLEebasUlR5Uu4dAFZxfddhjWtIYhCoXw=";
+      address = "10.83.6.2";
+      endpoint = "45.81.62.36:33732";
+    };
+  };
+
+  # Pin Nomad version
+  services.nomad.package = pkgs.nomad_1_6;
+  nixpkgs.config.allowUnfree = true; # Accept nomad's BSL license
 
   # Bootstrap IPs for Consul cluster,
   # these are IPs on the Wireguard overlay
   services.consul.extraConfig.retry_join = [
-    "10.83.1.1"  # concombre
-    "10.83.2.1"  # dahlia
     "10.83.3.1"  # df-ykl
+    "10.83.4.2"  # ananas
+    "10.83.6.1"  # pamplemousse
   ];
 
   deuxfleurs.adminAccounts = {
     lx = [
-      # Keys for accessing nodes from outside
-      "ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIJpaBZdYxHqMxhv2RExAOa7nkKhPBOHupMP3mYaZ73w9 lx@lindy"
       "ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIIw+IIX8+lZX9RrHAbwi/bncLYStXpI4EmK3AUcqPY2O lx@kusanagi "
     ];
     quentin = [

cluster/prod/known_hosts

@@ -9,3 +9,9 @@ concombre.machine.deuxfleurs.fr ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIL3N0QOFNGkC
 courgette.machine.deuxfleurs.fr ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIPCXJeo6yeQeTN7D7OZwLd8zbyU1jWywlhQ29yyk7x+G
 abricot.machine.deuxfleurs.fr ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIPhHUQtc5lukPMFkiWf/sTgaUpwNFXHCJoQKu4ooRFy+
 ananas.machine.deuxfleurs.fr ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIHs0zAyBy70oyV56qaMaMAKR7VjEDnsm5LEyZJbM95BL
+onion.machine.deuxfleurs.fr ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAINjBQ67fxwuDDzRPveTko/Sgf0cev3tIvlr3CfAmhF0C
+oseille.machine.deuxfleurs.fr ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIAgQdQ5UVFFn+DXN90ut9+V7NtEopQJnES3r8soKTZW4
+io.machine.deuxfleurs.fr ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIIvgCJ7Jew7ou1RZuaT41Sd+ucZAgxUwtdieqNqoC3+T
+ortie.machine.deuxfleurs.fr ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIMqtfIPLk8a5tM6Upj7GQwlIS16nBPrZYVXE2FVlO2Yn
+pamplemousse.machine.deuxfleurs.fr ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIAI0M5qny9yQ6LNzWqPfSlOWwTYpvxQtuSpFiOb6aVtA
+2001:912:1ac0:2200::201 ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIAI0M5qny9yQ6LNzWqPfSlOWwTYpvxQtuSpFiOb6aVtA

cluster/prod/node/concombre.nix

@@ -11,5 +11,4 @@
   deuxfleurs.hostName = "concombre";
   deuxfleurs.staticIPv4.address = "192.168.1.31";
   deuxfleurs.staticIPv6.address = "2001:910:1204:1::31";
-  deuxfleurs.isRaftServer = true;
 }

cluster/prod/node/dahlia.site.nix

@@ -1 +0,0 @@
-../site/orion.nix

cluster/prod/node/diplotaxis.nix

@@ -1,14 +0,0 @@
-# Configuration file local to this node
-
-{ config, pkgs, ... }:
-
-{
-  # Use the GRUB 2 boot loader.
-  boot.loader.grub.enable = true;
-  boot.loader.grub.version = 2;
-  boot.loader.grub.device = "/dev/nvme0n1"; # or "nodev" for efi only
-
-  deuxfleurs.hostName = "diplotaxis";
-  deuxfleurs.staticIPv4.address = "192.168.1.12";
-  deuxfleurs.staticIPv6.address = "2a01:e0a:28f:5e60::12";
-}

cluster/prod/node/diplotaxis.site.nix

@@ -1 +0,0 @@
-../site/orion.nix

cluster/prod/node/doradille.nix

@@ -1,14 +0,0 @@
-# Configuration file local to this node
-
-{ config, pkgs, ... }:
-
-{
-  # Use the GRUB 2 boot loader.
-  boot.loader.grub.enable = true;
-  boot.loader.grub.version = 2;
-  boot.loader.grub.device = "/dev/nvme0n1"; # or "nodev" for efi only
-
-  deuxfleurs.hostName = "doradille";
-  deuxfleurs.staticIPv4.address = "192.168.1.13";
-  deuxfleurs.staticIPv6.address = "2a01:e0a:28f:5e60::13";
-}

cluster/prod/node/doradille.site.nix

@@ -1 +0,0 @@
-../site/orion.nix

cluster/prod/node/io.nix

@@ -0,0 +1,11 @@
+{ ... }:
+{
+  boot.loader.grub.enable = true;
+  boot.loader.grub.device = "/dev/sda";
+
+  services.openssh.ports = [ 22 33603 ];
+
+  deuxfleurs.hostName = "io";
+  deuxfleurs.staticIPv4.address = "192.168.1.36";
+  deuxfleurs.staticIPv6.address = "2a01:e0a:5e4:1d0:52e5:49ff:fe5c:5f35";
+}

cluster/prod/node/io.site.nix

@@ -0,0 +1 @@
+../site/dathomir.nix

cluster/prod/node/onion.nix

@@ -0,0 +1,12 @@
+{ ... }:
+{
+  boot.loader.systemd-boot.enable = true;
+  boot.loader.timeout = 20;
+  boot.loader.efi.canTouchEfiVariables = true;
+
+  services.openssh.ports = [ 22 33601 ];
+
+  deuxfleurs.hostName = "onion";
+  deuxfleurs.staticIPv4.address = "192.168.1.34";
+  deuxfleurs.staticIPv6.address = "2a01:e0a:5e4:1d0:223:24ff:feb0:e866";
+}

cluster/prod/node/onion.site.nix

@@ -0,0 +1 @@
+../site/dathomir.nix

cluster/prod/node/ortie.nix

@@ -0,0 +1,12 @@
+{ ... }:
+{
+  boot.loader.systemd-boot.enable = true;
+  boot.loader.timeout = 20;
+  boot.loader.efi.canTouchEfiVariables = true;
+
+  services.openssh.ports = [ 22 33604 ];
+
+  deuxfleurs.hostName = "ortie";
+  deuxfleurs.staticIPv4.address = "192.168.1.37";
+  deuxfleurs.staticIPv6.address = "2a01:e0a:5e4:1d0:223:24ff:feb0:1b9";
+}

cluster/prod/node/ortie.site.nix

@@ -0,0 +1 @@
+../site/dathomir.nix

cluster/prod/node/oseille.nix

@@ -0,0 +1,12 @@
+{ ... }:
+{
+  boot.loader.systemd-boot.enable = true;
+  boot.loader.timeout = 20;
+  boot.loader.efi.canTouchEfiVariables = true;
+
+  services.openssh.ports = [ 22 33602 ];
+
+  deuxfleurs.hostName = "oseille";
+  deuxfleurs.staticIPv4.address = "192.168.1.35";
+  deuxfleurs.staticIPv6.address = "2a01:e0a:5e4:1d0:223:24ff:feaf:f90b";
+}

cluster/prod/node/oseille.site.nix

@@ -0,0 +1 @@
+../site/dathomir.nix

cluster/prod/node/pamplemousse.nix

@@ -0,0 +1,15 @@
+# Configuration file local to this node
+
+{ config, pkgs, ... }:
+
+{
+  # Use the systemd-boot EFI boot loader.
+  boot.loader.systemd-boot.enable = true;
+  boot.loader.timeout = 5;
+  boot.loader.efi.canTouchEfiVariables = true;
+
+  deuxfleurs.hostName = "pamplemousse";
+  deuxfleurs.staticIPv4.address = "192.168.5.201";
+  deuxfleurs.staticIPv6.address = "2001:912:1ac0:2200::201";
+  deuxfleurs.isRaftServer = true;
+}

cluster/prod/node/pamplemousse.site.nix

@@ -0,0 +1 @@
+../site/corrin.nix

cluster/prod/node/pasteque.nix

@@ -5,9 +5,10 @@
 {
   # Use the systemd-boot EFI boot loader.
   boot.loader.systemd-boot.enable = true;
+  boot.loader.timeout = 5;
   boot.loader.efi.canTouchEfiVariables = true;
 
-  deuxfleurs.hostName = "dahlia";
+  deuxfleurs.hostName = "pasteque";
-  deuxfleurs.staticIPv4.address = "192.168.1.11";
+  deuxfleurs.staticIPv4.address = "192.168.5.202";
-  deuxfleurs.staticIPv6.address = "2a01:e0a:28f:5e60::11";
+  deuxfleurs.staticIPv6.address = "2001:912:1ac0:2200::202";
 }

cluster/prod/node/pasteque.site.nix

@@ -0,0 +1 @@
+../site/corrin.nix

cluster/prod/site/corrin.nix

@@ -0,0 +1,8 @@
+{ config, pkgs, ... }:
+
+{
+  deuxfleurs.siteName = "corrin";
+  deuxfleurs.staticIPv4.defaultGateway = "192.168.5.1";
+  deuxfleurs.cnameTarget = "corrin.site.deuxfleurs.fr.";
+  deuxfleurs.publicIPv4 = "45.81.62.36";
+}

cluster/prod/site/dathomir.nix

@@ -0,0 +1,7 @@
+{ ... }:
+{
+  deuxfleurs.siteName = "dathomir";
+  deuxfleurs.cnameTarget = "dathomir.site.deuxfleurs.fr";
+  deuxfleurs.publicIPv4 = "82.64.238.84";
+  deuxfleurs.staticIPv4.defaultGateway = "192.168.1.1";
+}

cluster/prod/site/neptune.nix

@@ -2,7 +2,7 @@
 
 {
   deuxfleurs.siteName = "neptune";
-  deuxfleurs.staticIPv4.defaultGateway = "192.168.1.1";
+  deuxfleurs.staticIPv4.defaultGateway = "192.168.1.254";
   deuxfleurs.cnameTarget = "neptune.site.deuxfleurs.fr.";
-  deuxfleurs.publicIPv4 = "77.207.15.215";
+  deuxfleurs.publicIPv4 = "82.67.87.112";
 }

cluster/prod/site/orion.nix

@@ -1,8 +0,0 @@
-{ config, pkgs, ... }:
-
-{
-  deuxfleurs.siteName = "orion";
-  deuxfleurs.staticIPv4.defaultGateway = "192.168.1.254";
-  deuxfleurs.cnameTarget = "orion.site.deuxfleurs.fr.";
-  deuxfleurs.publicIPv4 = "82.66.80.201";
-}

cluster/prod/ssh_config

@@ -33,3 +33,20 @@ Host abricot
 Host ananas
   HostName ananas.machine.deuxfleurs.fr
 
+Host onion
+  HostName onion.machine.deuxfleurs.fr
+
+Host oseille
+  HostName oseille.machine.deuxfleurs.fr
+
+Host io
+  HostName io.machine.deuxfleurs.fr
+
+Host ortie
+  HostName ortie.machine.deuxfleurs.fr
+
+Host pamplemousse
+  HostName 2001:912:1ac0:2200::201
+
+Host pasteque
+  HostName 2001:912:1ac0:2200::202

cluster/staging/app/ci/deploy/albatros.hcl

@@ -1,5 +1,5 @@
 job "albatros" {
-  datacenters = ["neptune", "jupiter", "corrin", "bespin"]
+  datacenters = ["neptune", "dathomir", "corrin", "bespin"]
   type = "service"
   priority = 90
 

cluster/staging/app/ci/deploy/builder.hcl

@@ -2,7 +2,7 @@ job "builder" {
   namespace = "ci"
   type = "batch"
 
-  datacenters = ["neptune", "jupiter", "corrin", "bespin"]
+  datacenters = ["neptune", "dathomir", "corrin", "bespin"]
   priority = 100
 
   parameterized {

cluster/staging/app/core/deploy/bottin.hcl

@@ -0,0 +1,100 @@
+job "core-bottin" {
+  datacenters = ["neptune", "jupiter", "corrin", "bespin"]
+  type = "system"
+  priority = 90
+
+  update {
+    max_parallel = 1
+    stagger = "1m"
+  }
+
+  group "bottin" {
+    constraint {
+      distinct_property = "${meta.site}"
+      value = "1"
+    }
+
+    network {
+      port "ldap_port" {
+        static = 389
+        to = 389
+      }
+    }
+
+    task "bottin" {
+      driver = "docker"
+      config {
+        image = "dxflrs/bottin:7h18i30cckckaahv87d3c86pn4a7q41z"
+        network_mode = "host"
+        readonly_rootfs = true
+        ports = [ "ldap_port" ]
+        volumes = [
+          "secrets/config.json:/config.json",
+          "secrets:/etc/bottin",
+        ]
+      }
+
+      restart {
+        interval = "5m"
+        attempts = 10
+        delay    = "15s"
+        mode     = "delay"
+      }
+
+      resources {
+        memory = 100
+        memory_max = 200
+      }
+
+      template {
+        data = file("../config/bottin/config.json.tpl")
+        destination = "secrets/config.json"
+      }
+
+      template {
+        data = "{{ key \"secrets/consul/consul.crt\" }}"
+        destination = "secrets/consul.crt"
+      }
+
+      template {
+        data = "{{ key \"secrets/consul/consul-client.crt\" }}"
+        destination = "secrets/consul-client.crt"
+      }
+
+      template {
+        data = "{{ key \"secrets/consul/consul-client.key\" }}"
+        destination = "secrets/consul-client.key"
+      }
+
+      template {
+        data = <<EOH
+CONSUL_HTTP_ADDR=https://consul.service.staging.consul:8501
+CONSUL_HTTP_SSL=true
+CONSUL_CACERT=/etc/bottin/consul.crt
+CONSUL_CLIENT_CERT=/etc/bottin/consul-client.crt
+CONSUL_CLIENT_KEY=/etc/bottin/consul-client.key
+EOH
+        destination = "secrets/env"
+        env = true
+      }
+
+      service {
+        tags = [ "${meta.site}" ]
+        port = "ldap_port"
+        address_mode = "host"
+        name = "bottin"
+        check {
+          type = "tcp"
+          port = "ldap_port"
+          interval = "60s"
+          timeout = "5s"
+          check_restart {
+            limit = 3
+            grace = "90s"
+            ignore_warnings = false
+          }
+        }
+      }
+    }
+  }
+}

cluster/staging/app/core/deploy/d53.hcl

@@ -1,5 +1,5 @@
 job "core-d53" {
-  datacenters = ["neptune", "jupiter", "corrin", "bespin"]
+  datacenters = ["neptune", "dathomir", "corrin", "bespin"]
   type = "service"
   priority = 90
 

cluster/staging/app/core/deploy/diplonat.hcl

@@ -1,5 +1,5 @@
 job "core-diplonat" {
-  datacenters = ["neptune", "jupiter", "corrin", "bespin"]
+  datacenters = ["neptune", "dathomir", "corrin", "bespin"]
   type = "system"
   priority = 90
 

cluster/staging/app/core/deploy/tricot.hcl

@@ -1,5 +1,5 @@
 job "core-tricot" {
-  datacenters = ["neptune", "jupiter", "corrin", "bespin"]
+  datacenters = ["neptune", "dathomir", "corrin", "bespin"]
   type = "system"
   priority = 90
 
@@ -21,20 +21,25 @@ job "core-tricot" {
     }
 
     task "server" {
-      driver = "nix2"
+      driver = "docker"
 
       config {
-        packages = [
+        image = "armael/tricot:40g7jpp915jkfszlczfh1yw2x6syjkxs-redir-headers"
-          "git+https://git.deuxfleurs.fr/Deuxfleurs/tricot.git?ref=redirect&rev=b76b6dcbcc47ebc61848389a6b0d5d4e8d8cde48"
+        network_mode = "host"
+        readonly_rootfs = true
+        ports = [ "http_port", "https_port" ]
+        volumes = [
+          "secrets:/etc/tricot",
         ]
-        command = "tricot"
+        ulimit {
-        # cap_add = [ "net_bind_service" ]  # this doesn't work for whatever reason, so we need to put user = "root" instead
+          nofile = "65535:65535"
+        }
       }
-      user = "root"
 
       resources {
         cpu = 500
         memory = 200
+        memory_max = 500
       }
 
       restart {
@@ -46,17 +51,17 @@ job "core-tricot" {
 
       template {
         data = "{{ key \"secrets/consul/consul-ca.crt\" }}"
-        destination = "etc/tricot/consul-ca.crt"
+        destination = "secrets/consul-ca.crt"
       }
 
       template {
         data = "{{ key \"secrets/consul/consul-client.crt\" }}"
-        destination = "etc/tricot/consul-client.crt"
+        destination = "secrets/consul-client.crt"
       }
 
       template {
         data = "{{ key \"secrets/consul/consul-client.key\" }}"
-        destination = "etc/tricot/consul-client.key"
+        destination = "secrets/consul-client.key"
       }
 
       template {
@@ -71,7 +76,8 @@ TRICOT_CONSUL_CLIENT_KEY=/etc/tricot/consul-client.key
 TRICOT_HTTP_BIND_ADDR=[::]:80
 TRICOT_HTTPS_BIND_ADDR=[::]:443
 TRICOT_METRICS_BIND_ADDR=[::]:9334
-RUST_LOG=tricot=debug
+TRICOT_WARMUP_CERT_MEMORY_STORE=true
+RUST_LOG=tricot=trace
 RUST_BACKTRACE=1
 EOH
         destination = "secrets/env"
@@ -82,9 +88,6 @@ EOH
         name = "tricot-http"
         port = "http_port"
         tags = [
-          "d53-aaaa ${attr.unique.hostname}.machine.staging.deuxfleurs.org",
-          "d53-aaaa ${meta.site}.site.staging.deuxfleurs.org",
-          "d53-aaaa staging.deuxfleurs.org",
           "(diplonat (tcp_port 80))"
         ]
         address_mode = "host"
@@ -94,7 +97,10 @@ EOH
         name = "tricot-https"
         port = "https_port"
         tags = [
-          "(diplonat (tcp_port 443))"
+          "(diplonat (tcp_port 443))",
+          "d53-aaaa ${attr.unique.hostname}.machine.staging.deuxfleurs.org",
+          "d53-aaaa ${meta.site}.site.staging.deuxfleurs.org",
+          "d53-aaaa staging.deuxfleurs.org"
         ]
         address_mode = "host"
       }

cluster/staging/app/core/secrets.toml

@@ -1,3 +1,8 @@
+[secrets."directory/ldap_base_dn"]
+type = 'user'
+description = 'LDAP base DN for everything'
+example = 'dc=example,dc=com'
+
 [secrets."d53/gandi_api_key"]
 type = 'user'
 description = 'Gandi API key'

cluster/staging/app/cryptpad/config/application_config.js

@@ -0,0 +1,40 @@
+/*
+ * You can override the configurable values from this file.
+ * The recommended method is to make a copy of this file (/customize.dist/application_config.js)
+   in a 'customize' directory (/customize/application_config.js).
+ * If you want to check all the configurable values, you can open the internal configuration file
+   but you should not change it directly (/common/application_config_internal.js)
+*/
+define(['/common/application_config_internal.js'], function (AppConfig) {
+    // To inform users of the support ticket panel which languages your admins speak:
+    AppConfig.supportLanguages = [ 'en', 'fr' ];
+
+    /* Select the buttons displayed on the main page to create new collaborative sessions.
+     * Removing apps from the list will prevent users from accessing them. They will instead be
+     * redirected to the drive.
+     * You should never remove the drive from this list.
+     */
+    AppConfig.availablePadTypes = ['drive', 'teams', 'doc', 'presentation', 'pad', 'kanban', 'code', 'form', 'poll', 'whiteboard',
+                                'file', 'contacts', 'slide', 'convert'];
+    // disabled: sheet
+
+    /* You can display a link to your own privacy policy in the static pages footer.
+     * Since this is different for each individual or organization there is no default value.
+     * See the comments above for a description of possible configurations.
+     */
+    AppConfig.privacy = {
+      "default": "https://deuxfleurs.fr/CGU.html",
+    };
+
+    /* You can display a link to your instances's terms of service in the static pages footer.
+     * A default is included for backwards compatibility, but we recommend replacing this
+     * with your own terms.
+     *
+     * See the comments above for a description of possible configurations.
+     */
+    AppConfig.terms = {
+      "default": "https://deuxfleurs.fr/CGU.html",
+    };
+
+    return AppConfig;
+});

cluster/staging/app/cryptpad/config/config.js

@@ -0,0 +1,296 @@
+/* globals module */
+
+/*  DISCLAIMER:
+
+    There are two recommended methods of running a CryptPad instance:
+
+    1. Using a standalone nodejs server without HTTPS (suitable for local development)
+    2. Using NGINX to serve static assets and to handle HTTPS for API server's websocket traffic
+
+    We do not officially recommend or support Apache, Docker, Kubernetes, Traefik, or any other configuration.
+    Support requests for such setups should be directed to their authors.
+
+    If you're having difficulty difficulty configuring your instance
+    we suggest that you join the project's IRC/Matrix channel.
+
+    If you don't have any difficulty configuring your instance and you'd like to
+    support us for the work that went into making it pain-free we are quite happy
+    to accept donations via our opencollective page: https://opencollective.com/cryptpad
+
+*/
+module.exports = {
+/*  CryptPad is designed to serve its content over two domains.
+ *  Account passwords and cryptographic content is handled on the 'main' domain,
+ *  while the user interface is loaded on a 'sandbox' domain
+ *  which can only access information which the main domain willingly shares.
+ *
+ *  In the event of an XSS vulnerability in the UI (that's bad)
+ *  this system prevents attackers from gaining access to your account (that's good).
+ *
+ *  Most problems with new instances are related to this system blocking access
+ *  because of incorrectly configured sandboxes. If you only see a white screen
+ *  when you try to load CryptPad, this is probably the cause.
+ *
+ *  PLEASE READ THE FOLLOWING COMMENTS CAREFULLY.
+ *
+ */
+
+/*  httpUnsafeOrigin is the URL that clients will enter to load your instance.
+ *  Any other URL that somehow points to your instance is supposed to be blocked.
+ *  The default provided below assumes you are loading CryptPad from a server
+ *  which is running on the same machine, using port 3000.
+ *
+ *  In a production instance this should be available ONLY over HTTPS
+ *  using the default port for HTTPS (443) ie. https://cryptpad.fr
+ *  In such a case this should be also handled by NGINX, as documented in
+ *  cryptpad/docs/example.nginx.conf (see the $main_domain variable)
+ *
+ */
+    httpUnsafeOrigin: 'https://pad.staging.deuxfleurs.org',
+
+/*  httpSafeOrigin is the URL that is used for the 'sandbox' described above.
+ *  If you're testing or developing with CryptPad on your local machine then
+ *  it is appropriate to leave this blank. The default behaviour is to serve
+ *  the main domain over port 3000 and to serve the sandbox content over port 3001.
+ *
+ *  This is not appropriate in a production environment where invasive networks
+ *  may filter traffic going over abnormal ports.
+ *  To correctly configure your production instance you must provide a URL
+ *  with a different domain (a subdomain is sufficient).
+ *  It will be used to load the UI in our 'sandbox' system.
+ *
+ *  This value corresponds to the $sandbox_domain variable
+ *  in the example nginx file.
+ *
+ *  Note that in order for the sandboxing system to be effective
+ *  httpSafeOrigin must be different from httpUnsafeOrigin.
+ *
+ *  CUSTOMIZE AND UNCOMMENT THIS FOR PRODUCTION INSTALLATIONS.
+ */
+    httpSafeOrigin: "https://pad-sandbox.staging.deuxfleurs.org",
+
+/*  httpAddress specifies the address on which the nodejs server
+ *  should be accessible. By default it will listen on 127.0.0.1
+ *  (IPv4 localhost on most systems). If you want it to listen on
+ *  all addresses, including IPv6, set this to '::'.
+ *
+ */
+    httpAddress: '::',
+
+/*  httpPort specifies on which port the nodejs server should listen.
+ *  By default it will serve content over port 3000, which is suitable
+ *  for both local development and for use with the provided nginx example,
+ *  which will proxy websocket traffic to your node server.
+ *
+ */
+    httpPort: 3000,
+
+/*  httpSafePort allows you to specify an alternative port from which
+ *  the node process should serve sandboxed assets. The default value is
+ *  that of your httpPort + 1. You probably don't need to change this.
+ *
+ */
+    // httpSafePort: 3001,
+
+/*  CryptPad will launch a child process for every core available
+ *  in order to perform CPU-intensive tasks in parallel.
+ *  Some host environments may have a very large number of cores available
+ *  or you may want to limit how much computing power CryptPad can take.
+ *  If so, set 'maxWorkers' to a positive integer.
+ */
+    // maxWorkers: 4,
+
+    /* =====================
+     *         Admin
+     * ===================== */
+
+    /*
+     *  CryptPad contains an administration panel. Its access is restricted to specific
+     *  users using the following list.
+     *  To give access to the admin panel to a user account, just add their public signing
+     *  key, which can be found on the settings page for registered users.
+     *  Entries should be strings separated by a comma.
+     */
+    adminKeys: [
+      "[quentin@pad.deuxfleurs.fr/EWtzm-CiqJnM9RZL9mj-YyTgAtX-Zh76sru1K5bFpN8=]",
+      "[adrn@pad.deuxfleurs.fr/PxDpkPwd-jDJWkfWdAzFX7wtnLpnPlBeYZ4MmoEYS6E=]",
+      "[lx@pad.deuxfleurs.fr/FwQzcXywx1FIb83z6COB7c3sHnz8rNSDX1xhjPuH3Fg=]",
+      "[trinity-1686a@pad.deuxfleurs.fr/Pu6Ef03jEsAGBbZI6IOdKd6+5pORD5N51QIYt4-Ys1c=]",
+      "[Jill@pad.deuxfleurs.fr/tLW7W8EVNB2KYETXEaOYR+HmNiBQtZj7u+SOxS3hGmg=]",
+      "[vincent@pad.deuxfleurs.fr/07FQiE8w1iztRWwzbRJzEy3xIqnNR31mUFjLNiGXjwU=]",
+      "[boris@pad.deuxfleurs.fr/kHo5LIhSxDFk39GuhGRp+XKlMjNe+lWfFWM75cINoTQ=]",
+      "[maximilien@pad.deuxfleurs.fr/UoXHLejYRUjvX6t55hAQKpjMdU-3ecg4eDhAeckZmyE=]",
+      "[armael@pad.deuxfleurs.fr/CIKMvNdFxGavwTmni0TnR3x9GM0ypgx3DMcFyzppplU=]",
+      "[bjonglez@pad.deuxfleurs.fr/+RRzwcLPj5ZCWELUXMjmt3u+-lvYnyhpDt4cqAn9nh8=]"
+    ],
+
+    /* =====================
+     *        STORAGE
+     * ===================== */
+
+    /*  Pads that are not 'pinned' by any registered user can be set to expire
+     *  after a configurable number of days of inactivity (default 90 days).
+     *  The value can be changed or set to false to remove expiration.
+     *  Expired pads can then be removed using a cron job calling the
+     *  `evict-inactive.js` script with node
+     *
+     *  defaults to 90 days if nothing is provided
+     */
+    //inactiveTime: 90, // days
+
+    /*  CryptPad archives some data instead of deleting it outright.
+     *  This archived data still takes up space and so you'll probably still want to
+     *  remove these files after a brief period.
+     *
+     *  cryptpad/scripts/evict-inactive.js is intended to be run daily
+     *  from a crontab or similar scheduling service.
+     *
+     *  The intent with this feature is to provide a safety net in case of accidental
+     *  deletion. Set this value to the number of days you'd like to retain
+     *  archived data before it's removed permanently.
+     *
+     *  defaults to 15 days if nothing is provided
+     */
+    //archiveRetentionTime: 15,
+
+    /*  It's possible to configure your instance to remove data
+     *  stored on behalf of inactive accounts. Set 'accountRetentionTime'
+     *  to the number of days an account can remain idle before its
+     *  documents and other account data is removed.
+     *
+     *  Leave this value commented out to preserve all data stored
+     *  by user accounts regardless of inactivity.
+     */
+     //accountRetentionTime: 365,
+
+    /*  Starting with CryptPad 3.23.0, the server automatically runs
+     *  the script responsible for removing inactive data according to
+     *  your configured definition of inactivity. Set this value to `true`
+     *  if you prefer not to remove inactive data, or if you prefer to
+     *  do so manually using `scripts/evict-inactive.js`.
+     */
+    //disableIntegratedEviction: true,
+
+
+    /*  Max Upload Size (bytes)
+     *  this sets the maximum size of any one file uploaded to the server.
+     *  anything larger than this size will be rejected
+     *  defaults to 20MB if no value is provided
+     */
+    //maxUploadSize: 20 * 1024 * 1024,
+
+    /*  Users with premium accounts (those with a plan included in their customLimit)
+     *  can benefit from an increased upload size limit. By default they are restricted to the same
+     *  upload size as any other registered user.
+     *
+     */
+    //premiumUploadSize: 100 * 1024 * 1024,
+
+    /* =====================
+     *   DATABASE VOLUMES
+     * ===================== */
+
+    /*
+     * We need this config entry, else CryptPad will try to mkdir
+     * some stuff into Nix store apparently...
+     */
+    base: '/mnt/data',
+
+    /*
+     *  CryptPad stores each document in an individual file on your hard drive.
+     *  Specify a directory where files should be stored.
+     *  It will be created automatically if it does not already exist.
+     */
+    filePath: '/mnt/datastore/',
+
+    /*  CryptPad offers the ability to archive data for a configurable period
+     *  before deleting it, allowing a means of recovering data in the event
+     *  that it was deleted accidentally.
+     *
+     *  To set the location of this archive directory to a custom value, change
+     *  the path below:
+     */
+    archivePath: '/mnt/data/archive',
+
+    /*  CryptPad allows logged in users to request that particular documents be
+     *  stored by the server indefinitely. This is called 'pinning'.
+     *  Pin requests are stored in a pin-store. The location of this store is
+     *  defined here.
+     */
+    pinPath: '/mnt/data/pins',
+
+    /*  if you would like the list of scheduled tasks to be stored in
+        a custom location, change the path below:
+    */
+    taskPath: '/mnt/data/tasks',
+
+    /*  if you would like users' authenticated blocks to be stored in
+        a custom location, change the path below:
+    */
+    blockPath: '/mnt/block',
+
+    /*  CryptPad allows logged in users to upload encrypted files. Files/blobs
+     *  are stored in a 'blob-store'. Set its location here.
+     */
+    blobPath: '/mnt/blob',
+
+    /*  CryptPad stores incomplete blobs in a 'staging' area until they are
+     *  fully uploaded. Set its location here.
+     */
+    blobStagingPath: '/mnt/data/blobstage',
+
+    decreePath: '/mnt/data/decrees',
+
+    /* CryptPad supports logging events directly to the disk in a 'logs' directory
+     * Set its location here, or set it to false (or nothing) if you'd rather not log
+     */
+    logPath: false,
+
+    /* =====================
+     *       Debugging
+     * ===================== */
+
+    /*  CryptPad can log activity to stdout
+     *  This may be useful for debugging
+     */
+    logToStdout: true,
+
+    /* CryptPad can be configured to log more or less
+     * the various settings are listed below by order of importance
+     *
+     * silly, verbose, debug, feedback, info, warn, error
+     *
+     * Choose the least important level of logging you wish to see.
+     * For example, a 'silly' logLevel will display everything,
+     * while 'info' will display 'info', 'warn', and 'error' logs
+     *
+     * This will affect both logging to the console and the disk.
+     */
+    logLevel: 'silly',
+
+    /*  clients can use the /settings/ app to opt out of usage feedback
+     *  which informs the server of things like how much each app is being
+     *  used, and whether certain clientside features are supported by
+     *  the client's browser. The intent is to provide feedback to the admin
+     *  such that the service can be improved. Enable this with `true`
+     *  and ignore feedback with `false` or by commenting the attribute
+     *
+     *  You will need to set your logLevel to include 'feedback'. Set this
+     *  to false if you'd like to exclude feedback from your logs.
+     */
+    logFeedback: false,
+
+    /*  CryptPad supports verbose logging
+     *  (false by default)
+     */
+    verbose: true,
+
+    /*  Surplus information:
+     *
+     *  'installMethod' is included in server telemetry to voluntarily
+     *  indicate how many instances are using unofficial installation methods
+     *  such as Docker.
+     *
+     */
+    installMethod: 'deuxfleurs.fr',
+};

cluster/staging/app/cryptpad/deploy/cryptpad.hcl

@@ -0,0 +1,80 @@
+job "cryptpad" {
+  datacenters = ["neptune"]
+  type = "service"
+
+  group "cryptpad" {
+    count = 1
+
+    network {
+      port "http" {
+        to = 3000
+      }
+    }
+
+    restart {
+      attempts = 10
+      delay    = "30s"
+    }
+
+    task "main" {
+      driver = "docker"
+
+      constraint {
+        attribute = "${attr.unique.hostname}"
+        operator = "="
+        value = "caribou"
+      }
+
+      config {
+        image = "kokakiwi/cryptpad:2024.9.0"
+        ports = [ "http" ]
+
+        volumes = [
+          "/mnt/ssd/cryptpad:/mnt",
+          "secrets/config.js:/cryptpad/config.js",
+        ]
+      }
+      env {
+        CRYPTPAD_CONFIG = "/cryptpad/config.js"
+      }
+
+      template {
+        data = file("../config/config.js")
+        destination = "secrets/config.js"
+      }
+
+      /* Disabled because it requires modifications to the docker image and I do not want to invest the time yet
+      template {
+        data = file("../config/application_config.js")
+        destination = "secrets/config.js"
+      }
+      */
+
+      resources {
+        memory = 1000
+        cpu = 500
+      }
+
+      service {
+        name = "cryptpad"
+        port = "http"
+        tags = [
+          "tricot pad.staging.deuxfleurs.org",
+          "tricot pad-sandbox.staging.deuxfleurs.org",
+          "tricot-add-header Cross-Origin-Resource-Policy cross-origin",
+          "tricot-add-header Cross-Origin-Embedder-Policy require-corp",
+          "tricot-add-header Access-Control-Allow-Origin *",
+          "tricot-add-header Access-Control-Allow-Credentials true",
+          "d53-cname pad.staging.deuxfleurs.org",
+          "d53-cname pad-sandbox.staging.deuxfleurs.org",
+        ]
+        check {
+          type = "http"
+          path = "/"
+          interval = "10s"
+          timeout = "2s"
+        }
+      }
+    }
+  }
+}

cluster/staging/app/directory/deploy/directory.hcl

@@ -1,133 +0,0 @@
-job "directory" {
-  datacenters = ["neptune", "jupiter", "corrin", "bespin"]
-  type = "service"
-  priority = 90
-
-  constraint {
-    attribute = "${attr.cpu.arch}"
-    value     = "amd64"
-  }
-
-  group "bottin" {
-    count = 1
-
-    network {
-      port "ldap_port" {
-        static = 389
-      }
-    }
-
-    task "bottin" {
-      driver = "nix2"
-      config {
-        packages = [
-          "git+https://git.deuxfleurs.fr/Deuxfleurs/bottin.git?ref=main&rev=9cab98d2cee386ece54b000bbdf2346da8b55eed"
-        ]
-        command = "bottin"
-      }
-      user = "root" # needed to bind port 389
-
-      resources {
-        memory = 100
-      }
-
-      template {
-        data = file("../config/bottin/config.json.tpl")
-        destination = "config.json"
-      }
-
-      template {
-        data = "{{ key \"secrets/consul/consul-ca.crt\" }}"
-        destination = "etc/bottin/consul-ca.crt"
-      }
-
-      template {
-        data = "{{ key \"secrets/consul/consul-client.crt\" }}"
-        destination = "etc/bottin/consul-client.crt"
-      }
-
-      template {
-        data = "{{ key \"secrets/consul/consul-client.key\" }}"
-        destination = "etc/bottin/consul-client.key"
-      }
-
-      template {
-        data = <<EOH
-CONSUL_HTTP_ADDR=https://localhost:8501
-CONSUL_HTTP_SSL=true
-CONSUL_CACERT=/etc/bottin/consul-ca.crt
-CONSUL_CLIENT_CERT=/etc/bottin/consul-client.crt
-CONSUL_CLIENT_KEY=/etc/bottin/consul-client.key
-EOH
-        destination = "secrets/env"
-        env = true
-      }
-
-      service {
-        tags = ["bottin"]
-        port = "ldap_port"
-        name = "bottin"
-        check {
-          type = "tcp"
-          port = "ldap_port"
-          interval = "60s"
-          timeout = "5s"
-          check_restart {
-            limit = 3
-            grace = "90s"
-            ignore_warnings = false
-          }
-        }
-      }
-    }
-  }
-
-  group "guichet" {
-    count = 1
-
-    network {
-      port "web_port" { static = 9991 }
-    }
-
-    task "guichet" {
-      driver = "nix2"
-      config {
-        packages = [
-          "git+https://git.deuxfleurs.fr/Deuxfleurs/guichet.git?ref=main&rev=10bdee10cf6947ec6dd0ba5040d7274d6c3316a7"
-        ]
-        command = "guichet"
-      }
-
-      template {
-        data = file("../config/guichet/config.json.tpl")
-        destination = "config.json"
-      }
-
-      resources {
-        memory = 200
-      }
-
-      service {
-        name = "guichet"
-        tags = [
-          "guichet",
-          "tricot guichet.staging.deuxfleurs.org",
-          "d53-cname guichet.staging.deuxfleurs.org",
-        ]
-        port = "web_port"
-        check {
-          type = "tcp"
-          port = "web_port"
-          interval = "60s"
-          timeout = "5s"
-          check_restart {
-            limit = 3
-            grace = "90s"
-            ignore_warnings = false
-          }
-        }
-      }
-    }
-  }
-}
-

cluster/staging/app/garage/config/garage.toml

@@ -25,6 +25,7 @@ tls_skip_verify = true
 [s3_api]
 s3_region = "garage-staging"
 api_bind_addr = "0.0.0.0:3990"
+root_domain = ".garage.staging.deuxfleurs.org"
 
 [k2v_api]
 api_bind_addr = "0.0.0.0:3993"