distorsion/3D-printed-parametric-gas-mask
9
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity Actions

Commiting an uncomited modification

Browse source
This commit is contained in:
distorsion 2025-01-24 23:03:46 +01:00
parent 7bbd75228a
commit 2922a37169
1 changed files with 3 additions and 3 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

6
Readme.md
View file

@ -81,12 +81,12 @@ Everything (_except the separate membrane which is to be printed out of TPU, but
Print orientation are quite evident, although we would suggest printing the adapter tube with the flat "top" surface on the bed, and using minimal support to support the two threads meant to hold filters and to support the insuflation mask connector.
For support material, we suggest the following:
Regarding support material ; we suggest the following:
- at the bottom of the tube connecting to the insuflation mask
- at the bottom of the strap holders
- _optionally_, supporting the threads inside the two cartridge tubes (without support material, some sending might be required)
- _optionally_, supporting the threads ment for connecting the cartridges (_without support material, some sanding might be required_)
We don't recommend having support material under the two tubes for the cartridges, as it is not necessary. We also don't recommend having support material inside the tube connecting to the insuflation mask, as it is not necessary and hard to remove.
We don't recommend having support material under the two tubes for the cartridges, as it is _not necessary and makes the print significantly longer_. We also don't recommend having support material inside the tube connecting to the insuflation mask, as it is _not necessary and hard to remove_.
### 2.b - Supplies : _Other supplies_