3 KiB
3D Printed parametric gaz-mask
Masque à gaz paramétrique imprimé en 3D (version francaise ici)
pictures will be added later for more clarity
1 - General principle
There was many major version (8 in total) of this gaz mask before arriving at a final design.
1.a - Interfacing with the face
The final design relies on an insuflation mask for good fittment to the face of the user. The advantage of this is that the fittment is good, there are mumtiple sizes to choose from, and insuflation mask are readly available (they are suppose to be single use only, and are used at every anesthesia, CPR and in many other cases) and cheap (There are some available for arround 2€ at medisafe.fr for example).
The downside of this method are that firstly these mask tend to deteriorate over time and with use as they are ment to be single use item, however they are obviously swapable so they can be switched when unsusable ; and secondly that the height of these mask and the length of the adapter puts the majority of the mask weight far from the face and thus a bit unconfortable, espacially under quick head movments.
For a mask that directly fit on the face, see (the section on older version)[2 - Older version].
1.b - Filtering cartidge
This mask supports standard 40mm threaded cartridges - sometimes also known as "nato threaded" cartridges - which the standard dimensions are defined in sources/dimensions/nato_thread_spec.png.
We also provide a 3D printed cartridge following this standard and compatible with this mask and other standard gaz mask in the 3D-printed-parametric-respiratory-one-way-valve repository, which is a submodule of this repository located at ./3D-printed-parametric-respiratory-one-way-valve. WARNING : Please don't use a 3D printed cartridge (or even our mask) in life threatening situations ! Or at least understand the inner working of gaz mask and test your gaz mask (especialy its fittment to your face) before using it.
There is also an older version of such a cartridge modeled within the file of the [old gaz mask version]( 2.b - Older version : Filtering cartidge).
There also exist 3D printed adapter from this standard to other standard gaz mask connector if you search on 3D printing site.
1.c - One way valve(s)
TODO
2 - Older version
TODO
2.a - Older version : Interfacing with the face
TODO
2.b - Older version : Filtering cartidge
TODO
2.c - Older version : One way valve(s)
TODO
3 - Explanation of parameters
TODO