135 lines
3.8 KiB
Markdown
135 lines
3.8 KiB
Markdown
WPJ428 + SIMCOM 8202G
|
|
=====================
|
|
|
|
We try to build a FOSS 5GNR Router with OpenWRT.
|
|
Some challenges we have encountered so far:
|
|
- OpenWRT stable misses a patch to enable our board ethernet port -> we compile from source
|
|
- The Modem Manager simtech plugin does not declare 5GNR
|
|
|
|
## Flash the router
|
|
|
|
(Configure your computer with a static IP address 192.168.1.2/24 and make sure you have a running tftp server containing your image)
|
|
|
|
First connect your UART cable on the router:
|
|
|
|
|
|
|
|
Launch minicom
|
|
|
|
```
|
|
sudo minicom -D /dev/ttyUSB0
|
|
```
|
|
|
|
Then boot the router. Press repeatidly `[ENTER]` to get the following prompt:
|
|
|
|
```
|
|
(IPQ40xx) #
|
|
```
|
|
|
|
Then enter the following commands:
|
|
|
|
```
|
|
set ipaddr 192.168.1.1
|
|
set serverip 192.168.1.2
|
|
ping ${serverip}
|
|
sf probe
|
|
tftpboot 0x84000000 openwrt-ipq40xx-generic-compex_wpj428-squashfs-sysupgrade.bin
|
|
sf erase 0x00180000 +$filesize
|
|
sf write 0x84000000 0x00180000 $filesize
|
|
bootipq
|
|
```
|
|
|
|
## Compile
|
|
|
|
```
|
|
make menuconfig
|
|
scripts/diffconfig.sh > ../wpj428/config
|
|
make download
|
|
make -j $(nproc)
|
|
```
|
|
|
|
|
|
|
|
## Logs
|
|
|
|
uboot logs:
|
|
|
|
```
|
|
Format: Log Type - Time(microsec) - Message - Optional Info
|
|
Log Type: B - Since Boot(Power On Reset), D - Delta, S - Statistic
|
|
S - QC_IMAGE_VERSION_STRING=BOOT.BF.3.1.1-00118
|
|
S - IMAGE_VARIANT_STRING=DAABANAZA
|
|
S - OEM_IMAGE_VERSION_STRING=CRM
|
|
S - Boot Config, 0x00000021
|
|
S - Reset status Config, 0x00000000
|
|
S - Core 0 Frequency, 0 MHz
|
|
B - 261 - PBL, Start
|
|
B - 1339 - bootable_media_detect_entry, Start
|
|
B - 1679 - bootable_media_detect_success, Start
|
|
B - 1693 - elf_loader_entry, Start
|
|
B - 5073 - auth_hash_seg_entry, Start
|
|
B - 7219 - auth_hash_seg_exit, Start
|
|
B - 577690 - elf_segs_hash_verify_entry, Start
|
|
B - 695375 - PBL, End
|
|
B - 695399 - SBL1, Start
|
|
B - 786439 - pm_device_init, Start
|
|
D - 7 - pm_device_init, Delta
|
|
B - 787885 - boot_flash_init, Start
|
|
D - 52818 - boot_flash_init, Delta
|
|
B - 844845 - boot_config_data_table_init, Start
|
|
D - 3835 - boot_config_data_table_init, Delta - (419 Bytes)
|
|
B - 852054 - clock_init, Start
|
|
D - 7575 - clock_init, Delta
|
|
B - 864102 - CDT version:2,Platform ID:8,Major ID:1,Minor ID:0,Subtype:0
|
|
B - 867516 - sbl1_ddr_set_params, Start
|
|
B - 872614 - cpr_init, Start
|
|
D - 2 - cpr_init, Delta
|
|
B - 876996 - Pre_DDR_clock_init, Start
|
|
D - 4 - Pre_DDR_clock_init, Delta
|
|
D - 13176 - sbl1_ddr_set_params, Delta
|
|
B - 890735 - pm_driver_init, Start
|
|
D - 2 - pm_driver_init, Delta
|
|
B - 960961 - sbl1_wait_for_ddr_training, Start
|
|
D - 28 - sbl1_wait_for_ddr_training, Delta
|
|
B - 976579 - Image Load, Start
|
|
D - 151978 - QSEE Image Loaded, Delta - (297240 Bytes)
|
|
B - 1128985 - Image Load, Start
|
|
D - 1447 - SEC Image Loaded, Delta - (2048 Bytes)
|
|
B - 1139420 - Image Load, Start
|
|
D - 211388 - APPSBL Image Loaded, Delta - (432219 Bytes)
|
|
B - 1351204 - QSEE Execution, Start
|
|
D - 60 - QSEE Execution, Delta
|
|
B - 1357421 - SBL1, End
|
|
D - 664130 - SBL1, Delta
|
|
S - Flash Throughput, 2007 KB/s (731926 Bytes, 364613 us)
|
|
S - DDR Frequency, 537 MHz
|
|
|
|
|
|
U-Boot 2012.07 [Chaos Calmer 15.05.1,r35193] (Jul 25 2017 - 11:36:26)
|
|
|
|
smem ram ptable found: ver: 1 len: 3
|
|
DRAM: 256 MiB
|
|
machid : 0x8010000
|
|
NAND: SF: Detected MX25L25635E with page size 4 KiB, total 32 MiB
|
|
ipq_spi: page_size: 0x100, sector_size: 0x1000, size: 0x2000000
|
|
32 MiB
|
|
MMC:
|
|
*** Warning - bad CRC, using default environment
|
|
|
|
In: serial
|
|
Out: serial
|
|
Err: serial
|
|
machid: 8010000
|
|
flash_type: 0
|
|
Hit any key to stop autoboot: 0
|
|
Net: MAC0 addr:4:f0:21:65:18:12
|
|
PHY ID1: 0x4d
|
|
PHY ID2: 0xd0b1
|
|
ipq40xx_ess_sw_init done
|
|
eth0
|
|
```
|
|
|
|
## Sources
|
|
|
|
- [All the commits in OpenWRT about the WPJ428](https://git.openwrt.org/?p=openwrt%2Fopenwrt.git&a=search&h=HEAD&st=commit&s=WPJ428)
|
|
- https://openwrt.org/docs/guide-developer/build-system/use-buildsystem
|